{"title":"Coils and Pods","description":"","products":[{"product_id":"aspire-bvc-coils","title":"Aspire BVC Coils","description":"\u003cp dir=\"ltr\"\u003eThe Aspire BVC Replacement Coils are the standard, genuine replacement coils for Aspire's most widely used clearomiser and starter kit range — covering the CE5, CE5-S, ET, ET-S, ET-S Glass, K1, K1 Plus, K2, K Lite, ViVi Nova, Mini Nova, and Spryte AIO. Sold in a convenient pack of five, these are the coils that have kept millions of MTL vapers across the UK vaping cleanly, accurately, and satisfyingly for years — and with good reason.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBuilt around Aspire's proven BVC (Bottom Vertical Coil) technology with 100% organic cotton wicking and four dedicated wicking ports, these coils deliver a consistently clean, flavour-accurate MTL draw that's as reliable on the fifth coil of the pack as it is on the very first. If you're running any compatible Aspire clearomiser or starter kit tank, these are the coils you need — and at QSS Vape, you'll always find genuine Aspire stock with the hologram and scratch panel to prove it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e These standard BVC coils are not compatible with any Aspire Nautilus tank. For the Nautilus, Nautilus Mini, Nautilus 2, or Nautilus 2S, you need the Aspire Nautilus BVC coils — available separately at QSS Vape.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBVC Technology — Why It Works\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBVC stands for Bottom Vertical Coil — and its vertical heating element makes this design an effective, long-lasting choice for MTL vaping. Unlike conventional horizontally-mounted coils, the BVC element sits vertically at the base of the coil head — directly in the path of the e-liquid flowing in from the four surrounding wicking ports. This means the coil is consistently and evenly surrounded by e-liquid, delivering more even heating, cleaner flavour, and a smooth, consistent draw with no dry spots or burnt taste throughout the coil's lifespan.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 100% organic cotton wicking absorbs e-liquid efficiently without adding any unwanted flavour of its own — giving you a clean, neutral base that lets the character of your chosen nicotine salt or 50\/50 e-liquid come through accurately and purely with every single puff. It's a simple, well-proven design that has stood the test of time precisely because it works so consistently well.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eResistance Options — Choosing the Right Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAspire BVC coils are available across four resistance options, each delivering a distinct MTL experience:\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.2Ω BVC NS Coil\u003c\/strong\u003e — 10W–12W\u003cbr\u003eIntroduced with the Aspire Spryte AIO Kit, the 1.2Ω is specifically optimised for nicotine salt e-liquids. It offers a slightly warmer draw than the higher-resistance options, with a touch more vapour production, paired perfectly with the faster-absorbing nic salt formula for a smooth, satisfying hit without harshness. Choose this coil if you're running the Spryte with 20mg nic salts and want the best possible nic salt performance from the BVC platform.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.6Ω BVC Coil\u003c\/strong\u003e — 3.0V–4.2V \/ approx. 6–11W\u003cbr\u003eA slightly warmer, slightly airier MTL draw than the 1.8Ω — still firmly in tight MTL territory but with a fraction more warmth and flavour presence that many vapers find more satisfying for all-day use. This is the coil most commonly pre-fitted in the Aspire K2 kit when purchased new and performs well across most standard fixed-output batteries without variable wattage adjustment. A great all-round option for vapers who want a clean MTL draw with a bit more life. Best with 50\/50 freebase and 20mg nic salt e-liquids.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.8Ω BVC Coil\u003c\/strong\u003e — 3.0V–5.0V \/ approx. 3–6W\u003cbr\u003eThe most popular and most widely used coil in the entire BVC range — and for very good reason. The 1.8Ω delivers the tightest, coolest, most cigarette-like MTL draw of the standard BVC options, with minimal vapour production and a clean, accurate flavour profile that feels completely natural and familiar to anyone who has smoked cigarettes. If you're making the switch from smoking and want the draw that feels closest to a cigarette, start here. Most vapers running the 1.8Ω are happiest at around 3 to 6W — no complicated setup required. The cooler draw also makes it a particularly comfortable choice with 20mg nic salts. Best with 50\/50 freebase and 20mg nic salt e-liquids.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e2.1Ω BVC Coil\u003c\/strong\u003e — 5.0V–6.0V \/ approx. 11–16W\u003cbr\u003eThe highest resistance option in the BVC range — delivering the tightest, coolest draw of all four options and requiring the highest voltage output to perform at its best. Ideal for vapers running variable voltage devices at the higher end of their output range who prefer an ultra-restricted, ultra-cool MTL draw. A more niche choice than the 1.6Ω and 1.8Ω but a brilliant option for vapers who know exactly what they want. Best with 50\/50 freebase and 20mg nic salt e-liquids.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — A Comprehensive List\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe standard Aspire BVC coil is compatible with one of the longest device lists of any coil in the Aspire range:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAspire CE5 Clearomiser\u003c\/li\u003e\n\u003cli\u003eAspire CE5-S Clearomiser\u003c\/li\u003e\n\u003cli\u003eAspire ET Clearomiser\u003c\/li\u003e\n\u003cli\u003eAspire ET-S Clearomiser\u003c\/li\u003e\n\u003cli\u003eAspire ET-S Glass Clearomiser\u003c\/li\u003e\n\u003cli\u003eAspire ViVi Nova BDC\u003c\/li\u003e\n\u003cli\u003eAspire ViVi Nova-S BDC Glass\u003c\/li\u003e\n\u003cli\u003eAspire Mini ViVi Nova BDC\u003c\/li\u003e\n\u003cli\u003eAspire Mini ViVi Nova-S BDC Glass\u003c\/li\u003e\n\u003cli\u003eAspire K1 Kit\u003c\/li\u003e\n\u003cli\u003eAspire K1 Plus Kit\u003c\/li\u003e\n\u003cli\u003eAspire K2 Tank\u003c\/li\u003e\n\u003cli\u003eAspire K Lite Kit\u003c\/li\u003e\n\u003cli\u003eAspire Spryte AIO Kit \u003cem\u003e(1.2Ω coil recommended)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Any Aspire Nautilus tank (Nautilus, Nautilus Mini, Nautilus 2, Nautilus 2S, Nautilus Prime, Nautilus Prime X). If you are using any Nautilus device, you need Aspire Nautilus BVC coils, available separately at QSS Vape. Please check your device carefully before ordering to make sure you select the correct coil.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your BVC Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBVC coils are threaded and screw directly into the tank base. Unscrew the base of your compatible Aspire clearomiser or tank, remove the old coil by turning it anticlockwise, and screw in the new BVC coil clockwise until it seats firmly—without over-tightening.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBefore vaping, prime the coil by applying two to three drops of e-liquid directly onto the exposed cotton wicking ports around the coil body, then let it soak for two to three minutes before your first puff. This priming step is important—it ensures the organic cotton is fully saturated before the heating element fires and prevents dry hits that can shorten coil life and leave a burnt taste. Never vape immediately after fitting a fresh coil without priming first.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eStandard Aspire BVC coils typically last between one and two weeks of regular daily vaping, though lifespan depends on e-liquid used, vaping frequency, and chosen wattage. The most reliable sign that your coil needs replacing is a change in flavour — a muted, flat, or slightly burnt character is your clearest indicator that the cotton is spent. A gurgling sound during a draw or a noticeable reduction in vapour production are secondary signs. When any of these appear, swap in a fresh coil from your pack of five, and you're immediately back to clean, accurate flavour.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll standard Aspire BVC coils are designed for use with 50\/50 VG\/PG e-liquids and nicotine salt e-liquids at 10mg or 20mg strength. The organic cotton wicking is optimised for the thinner consistency of these formulas, ensuring fast and efficient saturation at the resistance levels these coils operate at.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, Riot X, and OXVA OX Passion nic salt ranges — are perfectly suited to the Aspire BVC coil system and will deliver clean, accurate flavour and a satisfying throat hit at the recommended wattages.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eDon't use high-VG e-liquids (70VG or above) with standard BVC coils — the thicker consistency will not wick efficiently through the organic cotton at these resistance levels, leading to dry hits and premature coil failure.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eAuthenticity — Genuine Aspire Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery pack of Aspire BVC coils sold at QSS Vape comes in genuine Aspire packaging complete with a hologram and scratch panel that lets you verify the authenticity of your coils directly through Aspire's official verification system. Counterfeit Aspire coils are unfortunately common in the UK market — buying from QSS Vape ensures you always receive 100% genuine Aspire stock, sourced from authorised UK distributors, every single time.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x BVC replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Type\u003c\/td\u003e\n\u003ctd\u003eBVC (Bottom Vertical Coil) — threaded screw-fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003e100% organic cotton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Ports\u003c\/td\u003e\n\u003ctd\u003eFour dedicated wicking ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e1.2Ω \/ 1.6Ω \/ 1.8Ω \/ 2.1Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.2Ω)\u003c\/td\u003e\n\u003ctd\u003e10W–12W (Spryte, nic salt optimised)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.6Ω)\u003c\/td\u003e\n\u003ctd\u003eapprox. 6–11W (3.0V–4.2V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.8Ω)\u003c\/td\u003e\n\u003ctd\u003eapprox. 3–6W (3.0V–5.0V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (2.1Ω)\u003c\/td\u003e\n\u003ctd\u003eapprox. 11–16W (5.0V–6.0V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style\u003c\/td\u003e\n\u003ctd\u003eMTL (Mouth-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended E-Liquid\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nicotine salts (10mg \u0026amp; 20mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eHigh-VG e-liquids (70VG or above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eCE5, CE5-S, ET, ET-S, ET-S Glass, ViVi Nova, Mini Nova, K1, K1 Plus, K2, K Lite, Spryte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eAny Aspire Nautilus tank (requires Nautilus BVC coils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuthenticity\u003c\/td\u003e\n\u003ctd\u003eHologram and scratch panel verification included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Aspire BVC Replacement Coils (resistance of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003ePlease select the correct resistance for your device and vaping preference. Not compatible with the Aspire Nautilus range. Devices and e-liquid sold separately.\u003c\/em\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"1.6 Ohm \/ 5","offer_id":39392864010439,"sku":"Aspire-BVC-Coils-1.6 Ohm","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"1.8Ohm \/ 5","offer_id":39392864043207,"sku":"Aspire-BVC-Coils-1.8Ohm","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/b5d9d6f8002e4549e6203885905e5e2e.jpg?v=1615631167"},{"product_id":"aspire-cleito-coils","title":"Aspire Cleito Coils","description":"\u003cp dir=\"ltr\"\u003eThe Aspire Cleito Replacement Coils are the genuine, official replacement coils for the Aspire Cleito and Aspire Cleito EXO tanks — and they remain one of the most well-regarded sub-ohm coil ranges available in the UK vape market, even years after the Cleito tank first launched. Built around Aspire's patented chimney-free coil design, available in both Clapton Kanthal wire and mesh configurations, and sold in a pack of five, these coils deliver the kind of flavour clarity, cloud production, and coil longevity that gave the Cleito its outstanding reputation — and continue to keep it firmly in the collections of experienced DTL vapers who know what they're looking for.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIf you're running a Cleito or Cleito EXO and it's time to stock up on fresh coils, there's no substitute for the genuine Aspire article — and at QSS Vape, that's exactly what you'll find.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe Chimney-Free Design — Why the Cleito Coil Is Different\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe single most distinctive and important feature of the Aspire Cleito coil is its revolutionary chimney-free design — and understanding why it works the way it does is key to appreciating what makes the Cleito such a standout in the sub-ohm tank world.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIn a conventional sub-ohm tank, a fixed static chimney runs up through the centre of the tank above the coil, channelling vapour from the coil upwards to the drip tip. This static chimney restricts airflow, limits the volume of vapour that can travel up per draw, and is one of the biggest bottlenecks in conventional tank design. Aspire's solution with the Cleito was to eliminate the static chimney and build the chimney directly into the coil head.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Cleito coil extends upward from its base and acts as its own chimney, opening a significantly larger, completely unrestricted airflow pathway directly above the coil. The result is an expanded flavour profile, increased vapour production, and a more open, airy DTL draw that clearly outperforms conventional sub-ohm coil designs at the same wattage. More airflow means the vapour travels faster from the coil to your mouth — cooler, cleaner, and packed with more flavour than a restricted chimney design could ever deliver.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCoil Options — Choosing the Right Cleito Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Aspire Cleito coil range covers four resistance options across two different coil technologies — Clapton Kanthal wire and mesh — each delivering a distinct sub-ohm experience:\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.15Ω Mesh Coil\u003c\/strong\u003e — 60W–75W\u003cbr\u003eThe most advanced coil in the Cleito range and the newest addition — a full mesh construction that distributes heat evenly across a wider surface area than the Clapton wire coils, delivering more consistent, accurate flavour and improved coil longevity throughout the mesh's lifespan. If you want the absolute best possible flavour from your Cleito setup and your mod can reach 60–75W comfortably, this is the coil to start with. Particularly recommended for vapers who prioritise flavour accuracy above all else — the even heat distribution of the mesh construction means every nuance of your chosen shortfill comes through clearly and consistently from first puff to last.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.2Ω Clapton Kanthal Coil\u003c\/strong\u003e — 55W–70W\u003cbr\u003eThe highest-wattage Clapton option in the standard Cleito range and the one to reach for when you want the warmest, most intense DTL experience the Clapton coils can deliver. Clapton wire wraps a thinner resistive wire around a thicker core wire, creating a larger overall surface area than standard round wire — resulting in faster ramp-up times, more even heat distribution, and a richer, more satisfying flavour profile than a conventional coil of the same resistance would produce. Bold, warm, and deeply satisfying — ideal for cloud chasers and vapers who love a full-on, intense DTL experience.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.27Ω Clapton Kanthal Coil\u003c\/strong\u003e — 40W–55W\u003cbr\u003eThe versatile middle ground of the Cleito range — a Clapton Kanthal coil that delivers a beautifully balanced combination of strong flavour and satisfying vapour production at a more moderate wattage than the 0.2Ω. The slightly higher resistance means the draw is a touch cooler and less intense than the 0.2Ω while still delivering the full benefit of the Clapton wire construction. This is the coil that many experienced Cleito users gravitate towards for all-day vaping — warm enough to deliver excellent flavour and cloud production, cool enough to vape comfortably for extended sessions without fatigue. A brilliant first choice if you're new to the Cleito range and want to explore the platform before committing to a higher wattage coil.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.4Ω Clapton Kanthal Coil\u003c\/strong\u003e — 40W–60W\u003cbr\u003eThe lowest-resistance option across two wattage ranges — the standard Kanthal 0.4ω runs at 40–60W and also comes in an SS316L stainless steel version at 55–65W, which adds temperature-control compatibility for mods with TC mode. The 0.4ω is the coolest, most flavour-focused Clapton option in the Cleito range — a slightly tighter draw than the 0.27ω and 0.2ω, producing a cleaner, more concentrated flavour profile with excellent vapour at the lower end of the wattage range. A great option for vapers who prefer a slightly less intense DTL draw or who want to run their Cleito at more moderate wattages. The SS316L version brings the added versatility of temperature control mode for vapers whose mod supports TC vaping.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKanthal Clapton Wire — Built for Performance and Longevity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe three Clapton wire options in the Cleito range use Kanthal A1 resistance wire in a Clapton configuration — a design that wraps a thinner wire tightly around a thicker core wire to create a significantly larger surface area than standard round wire of the same outer diameter. This larger surface area means the coil contacts more e-liquid per puff, heats more evenly across its full length, and delivers a richer, more consistent flavour than conventional wire constructions at equivalent wattages. Combined with the organic cotton wicking that fills the Clapton wrap, the result is a coil that performs at a genuinely high level and holds up exceptionally well throughout its lifespan — one of the reasons the Cleito range has consistently been praised for coil longevity by vapers who use it regularly.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Tanks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAspire Cleito replacement coils are compatible with the following Aspire tanks:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAspire Cleito Tank\u003c\/li\u003e\n\u003cli\u003eAspire Cleito EXO Tank\u003c\/li\u003e\n\u003cli\u003eAspire Cleito Pro Tank \u003cem\u003e(0.5Ω Cleito Pro coil also compatible)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Standard Aspire Cleito coils are \u003cstrong\u003enot\u003c\/strong\u003e compatible with the Aspire Cleito 120 Tank — the Cleito 120 uses a completely different coil platform and requires its own dedicated replacement coils. They are also not compatible with any other Aspire tank, including the Nautilus, Triton, Atlantis, or Athos ranges. Please check your tank carefully before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your Cleito Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstalling a fresh Cleito coil is straightforward—unscrew the base of your Cleito or Cleito EXO tank, remove the spent coil, and screw the fresh coil into the base. Before vaping, prime the coil by dripping three to five drops of e-liquid directly onto the exposed cotton wicking visible inside and around the coil head, then allow it to soak for two to three minutes before taking your first draw. This priming step is essential—it ensures the organic cotton is fully saturated before the heating element fires and prevents the dry hit that can occur with an unprimed coil. Never vape immediately after fitting a fresh Cleito coil without priming first.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOnce primed and installed, start at the lower end of the recommended wattage range for your chosen coil and work upwards gradually over your first few puffs — this breaks the coil in gently, extends its lifespan, and gives you the best possible flavour throughout. Jumping straight to the top of the wattage range on a fresh coil can burn the cotton before it's fully saturated, significantly shortening coil life.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Cleito Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAspire Cleito coils typically last between one and two weeks of regular daily sub-ohm vaping, depending on the e-liquid used, vaping frequency, and chosen wattage. Higher wattages and sweeter e-liquids will naturally shorten coil life, while moderate wattages and cleaner profiles will extend it. The clearest sign that a Cleito coil needs replacing is a change in flavour — a muted, flat, or burnt character indicates the cotton is spent and the coil needs swapping. A gurgling sound, reduced vapour production, or a darker discolouration of the e-liquid in the tank are further signs that it's time for a fresh coil. With five in every pack, you always have replacements ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll Aspire Cleito coils are designed for use with high-VG e-liquids of 60% VG or higher — with 70VG\/30PG or above strongly recommended for best results. The sub-ohm wattage ranges and DTL-focused coil designs of the Cleito range perform best with thicker, higher-VG formulas that provide the volume and viscosity needed for consistent coil saturation and cloud production at these power levels. This makes the Cleito coil range a natural partner for the full selection of 100ml 70VG\/30PG shortfills available at QSS Vape — including the Lancashire Creamery, Future Juice, Wild Roots, Mix Labs, and Just Juice shortfill ranges — all of which are perfectly suited to the Cleito's coil platform and deliver outstanding results at the wattages these coils operate at.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHigh-strength nicotine salts and 50\/50 e-liquids are not recommended for use with Cleito coils — the high vapour production at sub-ohm wattages will produce an uncomfortably harsh throat hit at 20mg nic salt strength. If you are vaping nic salts or prefer 50\/50 e-liquids, the Aspire BVC coil range is the right choice for your setup.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x Cleito replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Type\u003c\/td\u003e\n\u003ctd\u003eClapton Kanthal wire \/ Mesh (resistance dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003eOrganic cotton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.15Ω Mesh \/ 0.2Ω Kanthal \/ 0.27Ω Kanthal \/ 0.4Ω Kanthal \/ 0.4Ω SS316L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.15Ω Mesh)\u003c\/td\u003e\n\u003ctd\u003e60W–75W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.2Ω Kanthal)\u003c\/td\u003e\n\u003ctd\u003e55W–70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.27Ω Kanthal)\u003c\/td\u003e\n\u003ctd\u003e40W–55W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.4Ω Kanthal)\u003c\/td\u003e\n\u003ctd\u003e40W–60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.4Ω SS316L)\u003c\/td\u003e\n\u003ctd\u003e55W–65W (TC: 450°F–530°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTC Compatibility\u003c\/td\u003e\n\u003ctd\u003e0.4Ω SS316L only (wattage \u0026amp; TC mode)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style\u003c\/td\u003e\n\u003ctd\u003eDTL (Direct-to-Lung) \/ Sub-Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended E-Liquid\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher — shortfills and high VG e-liquids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eHigh-strength nic salts \/ 50\/50 e-liquids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign Feature\u003c\/td\u003e\n\u003ctd\u003eChimney-free coil — coil acts as its own chimney\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Tanks\u003c\/td\u003e\n\u003ctd\u003eAspire Cleito \/ Aspire Cleito EXO \/ Aspire Cleito Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eAspire Cleito 120 \/ Nautilus \/ Triton \/ Atlantis \/ Athos\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Aspire Cleito Replacement Coils (resistance of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eCompatible with the Aspire Cleito, Cleito EXO, and Cleito Pro tanks only. Not compatible with the Aspire Cleito 120. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"0.2 \/ 5","offer_id":39392864272583,"sku":"Aspire-Cleito-Coils-0.2","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/29b6aad97a34e1cddbaccd527669db54.jpg?v=1615631169"},{"product_id":"aspire-nautilus-coils","title":"Aspire Nautilus Coils","description":"\u003cp dir=\"ltr\"\u003eThe Aspire Nautilus BVC Replacement Coils are the genuine, official replacement coils for the Aspire Nautilus tank and kit range — and they remain one of the most consistently well-regarded coil ranges in the UK vaping market. With a track record of outstanding flavour, excellent longevity, and rock-solid reliability that has earned them near-unmatched loyalty among MTL vapers, these coils keep the Nautilus platform performing at its best, day after day.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAvailable at QSS Vape in three resistance options — 0.7Ω, 1.6Ω, and 1.8Ω — each sold in a convenient pack of five, there's a Nautilus BVC coil to suit every vaping preference from the tightest, most cigarette-like MTL draw right through to a warmer, more vapour-forward restricted draw for vapers who want more from their setup.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eBVC Technology — Why It Works So Well\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBVC stands for Bottom Vertical Coil — and the vertical orientation of the heating element is central to what makes this design such a consistently reliable and long-lasting choice for MTL vaping. Rather than sitting horizontally across the base of the coil head, the BVC element is positioned vertically — directly in the path of the e-liquid flowing in from the open wicking ports around the base. This means the coil is consistently and evenly surrounded by e-liquid at all times, delivering more even heating, cleaner flavour, and a smooth, reliable draw from the very first puff right through to the very last without the hot spots and uneven saturation that can cause dry hits in lesser coil designs.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Aspire Nautilus BVC coil uses organic cotton wicking—clean, neutral, and fast-absorbing—giving your chosen nicotine salt or 50\/50 e-liquid a pure, accurate flavour platform that never introduces anything unwanted into the vape.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThree Resistance Options — Choosing the Right Nautilus Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.8Ω BVC Coil\u003c\/strong\u003e — 10W–14W\u003cbr\u003eThe tightest, coolest, and most cigarette-like draw in the Nautilus BVC range — and by far the most popular option, particularly among vapers making the switch from cigarettes. Minimal vapour production, a clean and precise flavour profile, and a satisfying throat hit at 20mg nic salt strength make the 1.8Ω the natural starting point for anyone new to the Nautilus platform. The cool, restricted draw makes it equally comfortable for extended all-day vaping sessions without ever becoming fatiguing. Most vapers running the 1.8Ω find their sweet spot at around 10–12W — no complicated setup or wattage experimentation required. Best with 20mg and 10mg nicotine salts and 50\/50 freebase e-liquids.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.6Ω BVC Coil\u003c\/strong\u003e — 7W–11W\u003cbr\u003eA fraction warmer and slightly more open than the 1.8Ω — still firmly in tight MTL territory but with just a touch more warmth and flavour presence on every draw that many vapers find more rewarding for all-day use. The 1.6Ω is the coil most commonly pre-fitted in the Aspire K2 kit when purchased new and performs consistently well across most standard fixed-output batteries without requiring any wattage adjustment. A popular choice for vapers who've been running the 1.8Ω for a while and want to take a modest step towards a slightly warmer experience without losing the character that makes MTL vaping so satisfying. Best with 20mg and 10mg nicotine salts and 50\/50 freebase e-liquids.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.7Ω BVC Coil\u003c\/strong\u003e — 18W–23W\u003cbr\u003eThe point at which the Nautilus BVC range crosses into sub-ohm territory — and a genuinely significant step up in warmth, flavour intensity, and vapour production compared to the two higher-resistance options above. The 0.7Ω delivers a warm, open draw that sits right on the boundary between a tight restricted direct-to-lung experience and a warm RDL vape — producing noticeably more vapour and a fuller, bolder flavour profile that vapers coming from Pod kits or seeking more from their Nautilus setup will immediately appreciate. Please note: the 0.7Ω is a sub-ohm coil and should only be used with a device that is capable of safely firing sub-ohm resistances — check your device's specification before fitting this coil. The 0.7Ω is also not compatible with the original Aspire Nautilus or Nautilus Mini due to their more restrictive airflow design. Best with 50\/50 freebase e-liquids at 3mg–6mg strength — not recommended with 20mg nicotine salts due to the increased vapour production at higher wattages.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll three Nautilus BVC coil options — 0.7Ω, 1.6Ω, and 1.8Ω — are compatible with the following Aspire tanks and kits:\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTanks:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAspire Nautilus 2\u003c\/li\u003e\n\u003cli\u003eAspire Nautilus 2S\u003c\/li\u003e\n\u003cli\u003eAspire Nautilus 3 \/ Nautilus 3SR\u003c\/li\u003e\n\u003cli\u003eAspire Nautilus GT \/ Nautilus Mini GT\u003c\/li\u003e\n\u003cli\u003eAspire Nautilus Nano\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAspire Zelos 2\u003c\/li\u003e\n\u003cli\u003eAspire Zelos 3\u003c\/li\u003e\n\u003cli\u003eAspire Zelos X\u003c\/li\u003e\n\u003cli\u003eAspire Zelos M80\u003c\/li\u003e\n\u003cli\u003eAspire Zelos Nano Kit\u003c\/li\u003e\n\u003cli\u003eAspire K3 Tank \/ Kit\u003c\/li\u003e\n\u003cli\u003eAspire Nautilus AIO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant compatibility notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eThe \u003cstrong\u003e0.7Ω coil\u003c\/strong\u003e is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the original Aspire Nautilus or Nautilus Mini due to their more restrictive airflow — these devices are limited to the 1.6Ω and 1.8Ω options only\u003c\/li\u003e\n\u003cli\u003eAspire Nautilus BVC coils are \u003cstrong\u003enot\u003c\/strong\u003e compatible with the Nautilus Prime or Nautilus Prime X — those devices use a different coil platform.\u003c\/li\u003e\n\u003cli\u003eThese are \u003cstrong\u003eNautilus BVC coils\u003c\/strong\u003e — not the same as the standard Aspire BVC coils for the CE5, K1, K2, and Spryte range. Please check your device carefully before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your Nautilus BVC Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNautilus BVC coils are threaded and screw directly into the tank base. Unscrew the base of your compatible Nautilus tank anticlockwise, remove the old coil by turning it anticlockwise, and screw in the fresh coil clockwise until it seats firmly—without over-tightening.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBefore vaping, prime the fresh coil by applying three to five drops of e-liquid directly onto the exposed organic cotton wicking ports around the coil body, then let it soak for two to three minutes before your first draw. Never vape immediately on a fresh, unprimed coil — this priming step is the single most important thing you can do to extend coil life and prevent the unpleasant burnt taste that comes with a dry cotton wick.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOnce primed, start at the lower end of the recommended wattage range and work upwards gradually over your first few puffs — this beds the coil in gently and gives the cotton time to fully saturate, extending coil lifespan and delivering the best possible flavour throughout.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Nautilus BVC Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAspire Nautilus BVC coils are widely respected for their longevity — many regular Nautilus users report two to three weeks or more from a single coil with moderate daily vaping and the right e-liquid. The clearest sign a coil needs replacing is a change in flavour — a flat, muted, or slightly burnt taste is the most reliable indicator that the cotton is spent. Gurgling sounds during a draw or reduced vapour production are secondary signs. When any of these appear, swap in a fresh coil from your pack of five, and you're immediately back to clean, accurate flavour. Keeping the tank topped up at all times and never vaping on a near-empty tank will significantly extend coil life and help you get the most from every pack.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.8Ω and 1.6Ω coils\u003c\/strong\u003e — 50\/50 VG\/PG e-liquids and nicotine salt e-liquids at 10mg or 20mg strength. All 10ml nicotine salt e-liquids at QSS Vape work perfectly with both coils — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.7Ω coil\u003c\/strong\u003e — 50\/50 VG\/PG freebase e-liquids at 3mg–6mg strength. High-strength nicotine salts at 20mg are not recommended with the 0.7Ω — the increased vapour production at 18–23W makes high nicotine concentrations uncomfortably harsh.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHigh-VG e-liquids of 70VG or above are not recommended with any of the three Nautilus BVC coil options — the organic cotton wicking is optimised for the thinner consistency of 50\/50 and nic salt formulas and will not wick high-VG shortfills efficiently at these resistance levels.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eAuthenticity — Genuine Aspire Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery pack of Aspire Nautilus BVC coils sold at QSS Vape is 100% genuine Aspire stock, sourced from authorised UK distributors and complete with Aspire's hologram and scratch panel authenticity verification. Counterfeit Aspire coils are unfortunately common in the UK market — buying from QSS Vape guarantees the genuine article every single time.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x Nautilus BVC replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Type\u003c\/td\u003e\n\u003ctd\u003eBVC (Bottom Vertical Coil) — threaded screw-fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003eOrganic cotton with open wicking ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.7Ω \/ 1.6Ω \/ 1.8Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.8Ω)\u003c\/td\u003e\n\u003ctd\u003e10W–14W — tight cigarette-style MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.6Ω)\u003c\/td\u003e\n\u003ctd\u003e7W–11W — slightly warmer MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.7Ω)\u003c\/td\u003e\n\u003ctd\u003e18W–23W — warm RDL \/ restricted DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (1.8Ω \u0026amp; 1.6Ω)\u003c\/td\u003e\n\u003ctd\u003eMTL (Mouth-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.7Ω)\u003c\/td\u003e\n\u003ctd\u003eRDL \/ Restricted DTL (sub-ohm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (1.8Ω \u0026amp; 1.6Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nicotine salts (10mg \u0026amp; 20mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.7Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase (3mg–6mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Tanks\u003c\/td\u003e\n\u003ctd\u003eNautilus 2, Nautilus 2S, Nautilus 3, Nautilus GT, Nautilus Nano\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Kits\u003c\/td\u003e\n\u003ctd\u003eZelos 2, Zelos 3, Zelos X, Zelos M80, Zelos Nano, K3, Nautilus AIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.7Ω Compatibility Note\u003c\/td\u003e\n\u003ctd\u003eNot compatible with original Nautilus or Nautilus Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible With\u003c\/td\u003e\n\u003ctd\u003eNautilus Prime \/ Nautilus Prime X \/ CE5 \/ K1 \/ K2 \/ Spryte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuthenticity\u003c\/td\u003e\n\u003ctd\u003eHologram and scratch panel verification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Aspire Nautilus BVC Replacement Coils (resistance of choice — 0.7Ω, 1.6Ω, or 1.8Ω)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003ePlease select the correct resistance for your device and vaping preference. Check compatibility notes for the 0.7Ω before ordering. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"1.6 Ohm \/ 5","offer_id":39392865255623,"sku":"Aspire-Nautilus-Coils-1.6 Ohm","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.8 Ohm \/ 5","offer_id":39392865288391,"sku":"Aspire-Nautilus-Coils-1.8 Ohm","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.7 Ohm \/ 5","offer_id":39392865321159,"sku":"Aspire-Nautilus-Coils-0.7 Ohm","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/92aeab5e389f017e8e20b7689cead202.jpg?v=1615631177"},{"product_id":"aspire-pockex-coils","title":"Aspire PockeX Replacement Coils","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Aspire PockeX Replacement Coils are the genuine, official replacement coils for the Aspire PockeX AIO Kit, PockeX Box, and Aspire Nautilus X tank — a focused, no-fuss two-coil range that covers both MTL and restricted DTL vaping styles, built around Aspire's innovative U-Tech coil technology for a flavour experience that genuinely stands out from the crowd.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a convenient pack of five and available in two resistance options — a 0.6Ω 316L stainless steel coil and a 1.2Ω Kanthal coil — the PockeX coils are designed to get the absolute maximum flavour and performance from the PockeX platform, whether you're a former smoker looking for a tight, satisfying MTL draw at 20mg nic salt strength or an experienced vaper who wants a warmer, more vapour-forward restricted DTL experience from the same compact device. Like all genuine Aspire products, every pack includes the brand's scratch and check security code so you can verify your coils are the real deal straight out of the box.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eU-Tech Coil Technology — Double the Flavour Absorption\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe defining feature of the Aspire PockeX coil that sets it apart from standard replacement coils is Aspire's innovative U-Tech coil technology — a unique airflow engineering approach that fundamentally changes how the vapour interacts with the coil on its journey from the heating element to your mouth.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIn a conventional coil, air flows in a single pass around or through the heating element before travelling up to the drip tip. U-Tech changes this completely — the airflow passes twice around the coil in a U-shaped routing before reaching the mouthpiece. By doubling the amount of time the vapour spends in contact with the heated coil surface, U-Tech dramatically increases the amount of flavour the vapour absorbs during each draw. The result is a richer, more full-bodied flavour profile on every single puff — noticeably more flavourful than you'd expect from a compact AIO device using a conventional coil design.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBoth PockeX coil options — the 0.6Ω and the 1.2Ω — use U-Tech technology throughout, so whichever resistance you choose, you're getting the full benefit of Aspire's double-pass airflow system with every puff.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTwo Coil Options — Choosing the Right PockeX Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω 316L Stainless Steel Coil\u003c\/strong\u003e — 18W–23W \u003cem\u003e(pre-installed in all PockeX kits)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 0.6Ω is the default coil that ships pre-installed in every Aspire PockeX AIO kit — and it's the go-to choice for vapers who want more warmth, more vapour, and a slightly more open, restricted DTL draw from their PockeX. Made from food-grade 316L stainless steel throughout, the 0.6Ω delivers a warm, flavour-rich draw at 18–23W that produces noticeably denser vapour than the 1.2Ω option. The stainless steel construction also opens up temperature control mode compatibility on mods that support TC vaping — giving experienced users an extra level of performance customisation if their device allows it.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 0.6Ω is best suited to high-VG e-liquids of 60% VG or above — the sub-ohm resistance and higher wattage require a thicker e-liquid for consistent coil saturation and to prevent dry hits. It's not the ideal choice for 20mg nicotine salts — the increased vapour production at 18–23W makes high-strength nic salts uncomfortably harsh at this resistance. Instead, pair it with 3mg–6mg freebase e-liquids or shortfills of 60VG or above for the best possible performance. Works brilliantly with 50\/50 e-liquids at lower nicotine strengths too if you prefer not to use high-VG formulas.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.2Ω Kanthal Coil\u003c\/strong\u003e — 8W–12W\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 1.2Ω is the MTL specialist of the PockeX coil range — a tight, cool, cigarette-style mouth-to-lung coil made from Kanthal wire that performs at a low, comfortable 8–12W and delivers everything a vaper switching from cigarettes could want from a compact AIO device. The draw is noticeably more restricted than the 0.6Ω — cool, smooth, and satisfying with a throat hit that feels genuinely natural to former smokers — and the lower wattage means it works perfectly with thinner 50\/50 e-liquids and nicotine salt formulas at 10mg or 20mg strength. The cooler draw at this resistance also means the 1.2Ω is significantly more comfortable to vape for extended periods at 20mg nic salt strength — the throat hit is present and satisfying without ever tipping into harshness.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIf you're making the switch from cigarettes and running the PockeX for the first time, the 1.2Ω coil paired with a 20mg nic salt from the QSS Vape range is the setup to start with — it's the combination that most closely replicates the cigarette experience while delivering the full U-Tech flavour benefit that makes the PockeX such a standout AIO kit.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAspire PockeX replacement coils are compatible with the following Aspire devices:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAspire PockeX AIO Kit\u003c\/li\u003e\n\u003cli\u003eAspire PockeX Box AIO Kit\u003c\/li\u003e\n\u003cli\u003eAspire Nautilus X Tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e PockeX coils are designed exclusively for the above devices and are not compatible with any other Aspire tank or kit — including the Nautilus, Nautilus 2, Nautilus 3, Cleito, or BVC clearomiser ranges. Please check your device carefully before ordering to ensure you are selecting the correct coil.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your PockeX Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstalling a fresh PockeX coil is a unique process compared to most other Aspire tanks — the coil is housed in the top section of the device rather than the base. To swap a coil, unscrew the top cap of the PockeX device and lift it clear — the old coil will be attached to the underside of this top section. Unscrew the old coil from the top cap anticlockwise and set it aside. Apply three to five drops of e-liquid directly onto the cotton wicking visible inside the fresh coil to prime it, then screw the new coil firmly into the top cap clockwise — without over-tightening. Reattach the top section to the device, fill the tank with e-liquid via the side fill port, and wait for a minimum of five to ten minutes before vaping to allow the cotton to fully saturate. Skipping or shortening this priming time is the most common cause of the burnt taste that can occur on a freshly installed coil — patience at this stage makes a significant difference to the flavour and lifespan of every coil.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your PockeX Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWith proper priming and care, PockeX coils typically last between one and four weeks depending on vaping frequency, chosen wattage, and e-liquid type. Sweeter e-liquids and higher wattages will naturally shorten coil life, while cleaner profiles and moderate wattages will extend it. The clearest sign a coil needs replacing is a change in flavour — a muted, flat, or burnt character is your most reliable indicator. Reduced vapour production or a gurgling sound during a draw are secondary signs. When any of these appear, swap in a fresh coil from your pack of five and you'll be immediately back to the full U-Tech flavour experience. Keeping the tank topped up and never vaping on a near-empty tank will also extend coil life significantly — a dry coil is the quickest way to shorten coil lifespan and introduce a burnt taste.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω coil\u003c\/strong\u003e — High-VG e-liquids of 60% VG or above for best wicking and vapour production. Works with 50\/50 at lower nicotine strengths. Not recommended with 20mg nicotine salts due to the increased vapour production at 18–23W. Ideal pairing: 100ml 70VG\/30PG shortfills at 3mg from the QSS Vape shortfill range.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.2Ω coil\u003c\/strong\u003e — 50\/50 VG\/PG freebase e-liquids and nicotine salt e-liquids at 10mg or 20mg strength. All 10ml nicotine salt e-liquids available at QSS Vape work perfectly with the 1.2Ω PockeX coil — including the Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges. High-VG e-liquids of 70VG and above are not recommended with the 1.2Ω — the thicker consistency will not wick efficiently at this resistance and will cause dry hits.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eAuthenticity — Genuine Aspire Stock\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery pack of Aspire PockeX coils sold at QSS Vape is 100% genuine Aspire stock and includes Aspire's scratch and check security code on the packaging — scan or enter the code on Aspire's official website to verify your coils are genuine before use. Counterfeit Aspire coils do exist in the UK market and can perform poorly or cause device damage — buying from QSS Vape guarantees genuine Aspire stock sourced from authorised UK distributors, every single time.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x PockeX replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Technology\u003c\/td\u003e\n\u003ctd\u003eU-Tech — double-pass airflow for enhanced flavour absorption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.6Ω \/ 1.2Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e316L food-grade stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial (1.2Ω)\u003c\/td\u003e\n\u003ctd\u003eKanthal wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e18W–23W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.2Ω)\u003c\/td\u003e\n\u003ctd\u003e8W–12W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTC Compatibility (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003eYes — 316L SS compatible with TC mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003eRestricted DTL \/ RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (1.2Ω)\u003c\/td\u003e\n\u003ctd\u003eMTL (Mouth-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e60VG\/40PG or higher — shortfills and lower-strength freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (1.2Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nicotine salts (10mg \u0026amp; 20mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Installation\u003c\/td\u003e\n\u003ctd\u003eTop cap removal — coil attached to underside of top section\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Lifespan\u003c\/td\u003e\n\u003ctd\u003e1–4 weeks (usage and e-liquid dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eAspire PockeX AIO, Aspire PockeX Box, Aspire Nautilus X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eNautilus \/ Nautilus 2 \/ Nautilus 3 \/ Cleito \/ BVC clearomiser range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuthenticity\u003c\/td\u003e\n\u003ctd\u003eScratch and check security code included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Aspire PockeX Replacement Coils (resistance of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eCompatible with the Aspire PockeX AIO, PockeX Box, and Nautilus X only. Not compatible with any other Aspire device. Please check your device before ordering. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Aspire","offers":[{"title":"0.6 Ohm \/ 5","offer_id":39392865747143,"sku":"Aspire-PockeX-Coils-0.6 Ohm","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/pockex.jpg?v=1788350167"},{"product_id":"aspire-tigon-coils","title":"Aspire Tigon Coils","description":"Product Introduction\n\u003cp\u003eThe Aspire Tigon Coils, designed specifically for the Aspire Tigon. With 2 different Coil options the tank can be used for either MTL or Sub-Ohm Vaping.\u003c\/p\u003e \n\u003ch2\u003e\u003cu2\u003eCoil Options\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1.2ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e0.4ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/Picture1_3faa708b-d5cf-48b2-bf1b-1b1b55ddf5fa.png?v=1615240151\"\u003e\n\u003ch2\u003e\u003cu2\u003eKit Content:\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cp\u003eIt comes with\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Aspire Tigon Replacement Coil 5pcs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aspire","offers":[{"title":"1.2 Ohm \/ 5","offer_id":39392865976519,"sku":"Aspire-Tigon-Coils-1.2 Ohm","price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm \/ 5","offer_id":39392866009287,"sku":"Aspire-Tigon-Coils-0.4 Ohm","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/Aspire-Tigon-Replacement-Coil-5pcs_005785fe196d.jpg?v=1615631182"},{"product_id":"falcon-coils","title":"Falcon Coils","description":"\u003cp\u003eThe HorizonTech Falcon coils and HorizonTech Falcon King compatiable with your Falcon\/HorizonTech Falcon King Tank.\u003c\/p\u003e \n\u003ch2\u003e\u003cu2\u003eCoil Option\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM1+ 0.16ohm Mesh Coil (75W) \u003c\/li\u003e\n\u003cli\u003eM-Dual 0.38ohm Mesh Coil (80W) \u003c\/li\u003e\n\u003cli\u003eM2 0.16ohm Mesh Coil (70-80W) \u003c\/li\u003e\n\u003cli\u003eF1 0.2ohm Ni Coil (70-90W) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cu2\u003eContent \u003c\/u2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eIt comes with\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1 x HorizonTech Falcon\/Falcon King Replacement Coils 3pcs\u003c\/p\u003e","brand":"HorizonTech","offers":[{"title":"M Dual \/ 3","offer_id":39392867057863,"sku":"Falcon-Coils-M Dual","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/HorizonTech-FalconFalcon-King-Replacement-Coils-3pcs_0059454b5c62.jpg?v=1615631190"},{"product_id":"freemax-mesh-coils","title":"FreeMaX Mesh Coil","description":"\u003cp\u003eThe Freemax Mesh Pro Replacement Coil allows you to choose various wattage ranges while still giving you fantastic flavour and vapour production. These coils are perfectly compatible with Mesh Pro Tank. \u003c\/p\u003e\n\u003ch2\u003e\u003cu2\u003eCoil Options\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKanthal Single Mesh 0.15ohm coil (40-70W) \u003c\/li\u003e\n\u003cli\u003eKanthal Double Mesh 0.2ohm coil (60-90W) \u003c\/li\u003e\n\u003cli\u003eKanthal Triple Mesh 0.15ohm coil (80-100W) \u003c\/li\u003e\n\u003cli\u003eSS316L Single Mesh 0.12ohm coil(400-550øF) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/Picture1_d503b929-165d-4fa1-8959-470754a9774b.png?v=1615282418\"\u003e\n\u003ch2\u003e\u003cu2\u003eContent\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cp\u003eIt comes with\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Freemax Mesh Pro Replacement Coil 3pcs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Freemax","offers":[{"title":"Single \/ 3","offer_id":39392867221703,"sku":"FreeMaX-Mesh-Coils-Single","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"Double \/ 3","offer_id":39392867287239,"sku":"FreeMaX-Mesh-Coils-Double","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"Triple \/ 3","offer_id":39392867320007,"sku":"FreeMaX-Mesh-Coils-Triple","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/Freemax-Mesh-Pro-Replacement-Coil-3pcs_00496915d0e6.jpg?v=1615631193"},{"product_id":"geekvape-boost-coils","title":"Geekvape Boost Coils","description":"\u003cp dir=\"ltr\"\u003eThe Geekvape B Series Replacement Coils are the genuine, official replacement coils for one of the most versatile and widely used coil platforms in the UK vaping market — covering the Aegis Boost, Aegis Boost Plus, Aegis Boost 3, Aegis Hero, Aegis Hero 2, Aegis Hero 5, H45, Z50, M100, Mero, Obelisk 65 FC, Zeus Nano, and Zeus Nano 2 devices in a single, unified coil family.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOriginally launched as the Aegis Boost replacement coils, the B Series name now covers the full range across all compatible Geekvape platforms, and the packaging has been updated to reflect this. However, the coils themselves remain unchanged in construction, performance, and compatibility. Every pack contains five coils, and the full B Series range spans resistances from 0.2Ω right up to 1.2Ω — covering everything from tight MTL nic salt vaping at low wattage right through to warm RDL and full DTL cloud chasing at higher wattages, all from the same push-fit coil platform that takes seconds to install without any tools.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eWhether you're running an Aegis Boost on 20mg nic salts with a 1.2Ω coil or pushing an Aegis Hero 5 at 50W with a 0.2Ω mesh for maximum cloud production — the B Series has exactly the right coil for your setup, and at QSS Vape you'll always find 100% genuine Geekvape stock.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKA1 Mesh Construction — Better Flavour, Longer Life\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery coil in the Geekvape B Series uses KA1 mesh construction throughout—and mesh is key to why these coils consistently outperform older round-wire coil designs in both flavour accuracy and coil longevity. The mesh surface heats e-liquid evenly across a far wider area than a conventional wound coil of the same resistance, eliminating the hot spots that cause uneven flavour and premature cotton degradation. The result is a cleaner, more consistent flavour profile from the very first puff right through to the end of each coil's life — with noticeably less of the gradual flavour drop-off that vapers using round-wire coils often experience over time.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Boost versions of the B Series coils — covering the 0.2Ω through 0.6Ω options — are the newer generation of the range, featuring advanced materials and improved heat-load engineering that extend coil lifespan by up to 100% compared to the older B coil generation. Each Boost coil is rated for approximately 50–60ml of e-liquid before needing replacement — an exceptional lifespan for a push-fit Pod coil that makes the B Series one of the most cost-effective coil ranges in the UK right now.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePush-Fit Installation — No Tools, No Threading, No Mess\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Geekvape B Series coil uses Geekvape's simple push-fit installation system — arguably the most convenient coil-change system available from any brand in the UK vape market. There's no threading, no screwing, and no risk of cross-threading. Pull the old coil out of the Pod or tank, prime the fresh coil, push it into the coil seat until it clicks firmly into place, and vape. The whole process takes less than thirty seconds from start to finish and requires no tools. It's a brilliantly practical system that makes the Geekvape B Series platform one of the easiest coil-based setups to use every day.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe Full B Series Coil Range — Choosing the Right Resistance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Geekvape B Series covers a wide wattage range from 8W to 58W across five resistance options, each delivering a distinct vaping experience:\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.2Ω B Series Mesh Coil (Boost)\u003c\/strong\u003e — 50W–58W\u003cbr\u003eThe most powerful coil in the B Series range and a full DTL option for vapers who want maximum cloud production and bold, intense flavour. The 0.2Ω operates at 50–58W and requires a high-VG e-liquid of 60% VG or above for consistent wicking and performance. Not suitable for nicotine salts at high strength — the vapour production at this wattage makes anything above 6mg uncomfortably harsh. A brilliant choice for experienced sub-ohm vapers running the Aegis Hero 5 or M100 and wanting the absolute ceiling of B Series performance.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.3Ω B Series Mesh Coil (Boost)\u003c\/strong\u003e — 30W–38W\u003cbr\u003eA warm, open restricted DTL coil that sits just below the 0.2Ω in intensity — producing dense, satisfying clouds and rich flavour at a slightly more moderate wattage that suits a wider range of devices comfortably. Best with high-VG e-liquids of 60% VG or above at 3mg–6mg strength. A solid all-round choice for vapers who want strong DTL performance without pushing to 50W+.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.4Ω B Series Mesh Coil (Boost)\u003c\/strong\u003e — 25W–33W\u003cbr\u003eThe versatile mid-point of the B Series range — a balanced RDL coil that delivers a warmer, more vapour-forward draw than the higher-resistance MTL options without committing to the full open DTL experience of the 0.2Ω or 0.3Ω. The 0.4Ω produces excellent flavour and satisfying vapour at a comfortable wattage that most Geekvape devices handle easily. Works well with 50\/50 freebase e-liquids at lower nicotine strengths and high-VG e-liquids alike — a genuinely versatile coil that works brilliantly as an all-day setup for vapers who want more than MTL without going full DTL.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω B Series Mesh Coil (Boost)\u003c\/strong\u003e — 15W–25W\u003cbr\u003eThe lightest touch of the DTL\/RDL B Series options — a warm, slightly restricted draw that sits right on the boundary between a loose MTL and a light RDL. The 0.6Ω is one of the most popular options in the entire B Series range because it hits a sweet spot that works across a very wide range of vapers — warm enough to deliver real flavour and satisfying vapour, but cool and accessible enough that it doesn't require high-VG e-liquids or high wattages to perform at its best. Pairs well with both 50\/50 freebase e-liquids at 3mg–6mg and higher-VG shortfills, making it a genuinely flexible everyday coil for the Aegis Boost and Hero platforms. For best results, use 50\/50 PG or higher e-liquids.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.2Ω B Series MTL Coil\u003c\/strong\u003e — 8W–12W (also compatible: 0.8Ω at 12W–16W)\u003cbr\u003eThe MTL specialist of the B Series range — a tight, cool, cigarette-style mouth-to-lung coil that operates at just 8–12W and delivers everything a vaper switching from cigarettes or running high-strength nic salts could need. The draw is noticeably more restricted than any of the RDL\/DTL options above — cool, smooth, and satisfying with a throat hit that feels completely natural and familiar — and the low wattage means it works perfectly with nicotine salts at 10mg or 20mg strength and 50\/50 freebase e-liquids. If you're running an Aegis Boost or Zeus Nano primarily for nic salt vaping, the 1.2Ω is the coil to reach for. Best with 20mg and 10mg nicotine salt e-liquids and 50\/50 freebase e-liquids.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Compatible Device List\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGeekvape B Series coils are compatible with an extensive range of Geekvape devices and pods:\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKits \u0026amp; Devices:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGeekvape Aegis Boost\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Boost Plus\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Boost LE \/ Bonus\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Boost 3\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Hero\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Hero 2 (H45)\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Hero 5\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis M100\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Z50\u003c\/li\u003e\n\u003cli\u003eGeekvape Obelisk 65 FC\u003c\/li\u003e\n\u003cli\u003eGeekvape Mero Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTanks \u0026amp; Pods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGeekvape Zeus Nano Tank\u003c\/li\u003e\n\u003cli\u003eGeekvape Zeus Nano 2 Tank\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Hero 5 Pod\u003c\/li\u003e\n\u003cli\u003eGeekvape B60 (Aegis Boost 2 \/ Aegis Boost 3) Pod\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Force Pod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Geekvape B Series coils are designed exclusively for the compatible devices and pods listed above. They are not compatible with Geekvape's Z Series, P Series, or any other Geekvape coil platform. Please check your device carefully before ordering to ensure B Series coils fit your kit.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your B Series Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstalling a fresh Geekvape B Series coil is one of the most straightforward coil-change processes available — no tools, no threading, just push-fit simplicity. Remove the Pod or tank from your device and locate the coil seat. Pull the old coil out by gripping it firmly and pulling upward — it releases cleanly without twisting. Before fitting the fresh coil, prime it by applying three to five drops of e-liquid directly onto the exposed cotton wicking ports at the top and sides of the coil, then allow it to soak for three to five minutes. Push the primed coil firmly into the coil seat until it clicks securely into place. Reattach the Pod or tank to your device, fill with e-liquid, and start vaping at the lower end of the recommended wattage range — working upwards gradually over your first few puffs to bed the coil in gently. Never skip the priming step — it's the single most important thing you can do to maximise coil life and flavour quality.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your B Series Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Boost versions of the B Series (0.2Ω through 0.6Ω) are rated for approximately 50–60ml of e-liquid per coil — delivering roughly one to two weeks of regular daily vaping depending on frequency and chosen wattage. The MTL options (0.8Ω and 1.2Ω) typically last one to two weeks of moderate daily use. Sweeter e-liquids and higher wattages will shorten coil life, while cleaner profiles and moderate wattages extend it. The clearest sign a coil needs replacing is a change in flavour — a muted, flat, or slightly burnt taste means the cotton is spent. Reduced vapour production or a gurgling sound are secondary indicators. When any of these appear, swap in a fresh coil from your pack of five.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCoil\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.2Ω\u003c\/td\u003e\n\u003ctd\u003eHigh-VG 60VG+ shortfills — 3mg–6mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.3Ω\u003c\/td\u003e\n\u003ctd\u003eHigh-VG 60VG+ shortfills — 3mg–6mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 freebase or high-VG — 3mg–6mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 PG or higher — 3mg–10mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.2Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nicotine salts — 10mg \u0026amp; 20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the Elux Salt, Crystal Salt, Just Juice Bar, Pixl, and Riot X nic salt ranges — are perfectly suited to the 1.2Ω B Series MTL coil. The full range of 100ml 70VG\/30PG shortfills at QSS Vape pairs brilliantly with the 0.2Ω and 0.3Ω Boost coils for maximum DTL performance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x B Series replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Construction\u003c\/td\u003e\n\u003ctd\u003eKA1 mesh throughout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePush-fit — no tools, no threading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.2Ω \/ 0.3Ω \/ 0.4Ω \/ 0.6Ω \/ 0.8Ω \/ 1.2Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.2Ω)\u003c\/td\u003e\n\u003ctd\u003e50W–58W — DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.3Ω)\u003c\/td\u003e\n\u003ctd\u003e30W–38W — Restricted DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003e25W–33W — RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e15W–25W — Loose MTL \/ RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e12W–16W — MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.2Ω)\u003c\/td\u003e\n\u003ctd\u003e8W–12W — Tight MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoost Generation\u003c\/td\u003e\n\u003ctd\u003e0.2Ω–0.6Ω (Boost — up to 2x lifespan)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Lifespan (Boost)\u003c\/td\u003e\n\u003ctd\u003eApprox. 50–60ml per coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Lifespan (MTL)\u003c\/td\u003e\n\u003ctd\u003e1–2 weeks typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style\u003c\/td\u003e\n\u003ctd\u003eMTL (1.2Ω\/0.8Ω) \/ RDL (0.6Ω\/0.4Ω) \/ DTL (0.3Ω\/0.2Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eAegis Boost, Boost Plus, Boost 3, Hero, Hero 2, Hero 5, H45, M100, Z50, Obelisk 65 FC, Mero, Zeus Nano, Zeus Nano 2, B60 Pod, Force Pod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eGeekvape Z Series, P Series, or other Geekvape platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Geekvape B Series Replacement Coils (resistance of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eCompatible with Geekvape Aegis Boost, Boost Plus, Boost 3, Hero, Hero 2, Hero 5, H45, M100, Z50, Obelisk 65 FC, Mero, Zeus Nano, Zeus Nano 2, B60 Pod, and Force Pod only. Not compatible with Geekvape Z Series, P Series, or other coil platforms. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Geekvape","offers":[{"title":"0.4 Ohm \/ 5","offer_id":39392868794567,"sku":"Geekvape-Boost-Coils-0.4 Ohm","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm \/ 5","offer_id":39392868827335,"sku":"Geekvape-Boost-Coils-0.6 Ohm","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.2 Ohm \/ 5","offer_id":57429283275127,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/Geekvape-Aegis-Boost-Replacement-Coil-5pcs_0066890e6d2b.jpg?v=1615631200"},{"product_id":"innokin-prism-s-coils","title":"Innokin Prism S Coils","description":"\u003cp dir=\"ltr\"\u003eThe Innokin Prism S Replacement Coils are the genuine, official replacement coils for the Innokin T20S tank, Endura T20S, EZ Watt Kit, and Innokin APEX Kit — a focused, well-engineered three-coil MTL range that covers everything from the tightest, most discreet cigarette-style draw right through to a warmer, more flavour-forward mouth-to-lung experience, all built around Innokin's proven no-spill coil swap system and wicked with 100% pure Japanese organic cotton throughout.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a pack of five and available in three resistance options — 0.8Ω, 0.9Ω Mesh, and 1.5Ω — the Prism S coils are one of the most popular and consistently well-regarded MTL coil ranges in the UK, particularly among vapers making the switch from cigarettes who want a clean, natural, and genuinely satisfying draw that doesn't require any complicated setup or technical knowledge. Whether you've been running the T20S for years or you've just picked up your first Innokin kit, these coils keep it performing exactly as it should — simple, reliable, and consistently excellent.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNo-Spill Coil Swap — The Cleanest Coil Change in MTL Vaping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOne genuinely practical feature that sets the Innokin Prism S coil apart from many competing MTL coil designs is its no-spill coil swap system. Each Prism S coil houses a 510 connector pin at its base, meaning you can change the coil from the bottom of the tank rather than disassembling the tank from the top or risking a spill.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTo swap a coil, unscrew the base of your T20S or compatible Innokin tank, pull the old coil straight out cleanly, push the fresh primed coil into place, and screw the base back on. The coil pulls out and inserts vertically without twisting, threading, or risk of e-liquid spillage—making coil changes fast, clean, and genuinely mess-free every time. A formation of rubber O-rings around the coil body keeps e-liquid securely contained during the swap, preventing the drips and spills that bottom-fill coil changes can sometimes produce with less well-engineered designs.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePure Japanese Organic Cotton — Clean, Neutral, Flavour-True Wicking\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Innokin Prism S coil — across all three resistance options — is wicked with 100% pure Japanese organic cotton. Free from bleach, fungicides, pesticides, colourings, and other processing impurities, Japanese organic cotton is widely regarded as the gold standard wicking material in the vaping industry — and for very good reason. It wicks e-liquid efficiently and consistently without adding any flavour of its own, giving your chosen nicotine salt or 50\/50 e-liquid a clean, neutral platform to express itself. The result is a purer, more accurate flavour on every draw — especially with subtle, nuanced e-liquid profiles that lesser wicking materials can muddy or distort.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThree Resistance Options — Choosing the Right Prism S Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.8Ω Prism S Coil\u003c\/strong\u003e — 16W–18W\u003cbr\u003eThe most vapour-forward and flavour-intense option in the standard Prism S range. This sub-ohm coil delivers a noticeably warmer, more open draw than the 1.5Ω with a satisfying level of cloud production that makes it a popular everyday choice for vapers who want a bit more from their MTL setup without stepping into a full DTL tank. The 0.8Ω sits right on the boundary between a tight restricted DTL and a warm MTL draw, producing more vapour than the 1.5Ω while still maintaining the focused, mouth-filling character that defines the Prism S platform. Best with 50\/50 VG\/PG freebase e-liquids or high-PG formulas at 3mg–6mg strength. Compatible with higher-VG e-liquids of 60VG or above for vapers who prefer a smoother, denser hit.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.9Ω Prism S Mesh Coil\u003c\/strong\u003e — 13W–15W\u003cbr\u003eThe newest addition to the Prism S range and its most technically advanced option — a mesh coil construction that distributes heat more evenly across the wicking surface than the round-wire designs used in the 0.8Ω and 1.5Ω options. The mesh element heats e-liquid across a wider, more uniform area for quicker saturation and more consistent flavour delivery from the very first puff. The result is a noticeably cleaner, more accurate flavour profile than the standard wire options—richer and more detailed on every draw—while operating at a moderate 13–15W that's comfortably within reach of any compatible Innokin device. A brilliant choice for vapers who prioritise flavour clarity above all else and want the best possible taste from their T20S or APEX Kit. Best with 50\/50 VG\/PG or high-PG e-liquids. Works well with nicotine salts at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.5Ω Prism S Coil\u003c\/strong\u003e — 6W–10W\u003cbr\u003eThe tightest, coolest, and most cigarette-like draw in the entire Prism S range — and the go-to choice for vapers making the switch from cigarettes who want the most authentic replication of a cigarette pull that any Innokin coil can provide. The 1.5Ω operates at just 6–10W and produces the smallest, most discreet vapour output of the three options — a cool, clean, restricted MTL draw that's barely visible and feels completely natural to anyone transitioning away from smoking for the first time. The throat hit at 20mg nic salt strength is satisfying and immediate without harshness, and the low wattage keeps battery consumption remarkably low — making this the ideal coil for all-day use at lower device outputs. Best with high-PG e-liquids and nicotine salts at 10mg or 20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInnokin Prism S replacement coils are compatible with the following Innokin tanks and kits:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eInnokin Endura T20S Tank\u003c\/li\u003e\n\u003cli\u003eInnokin Endura T20S Kit\u003c\/li\u003e\n\u003cli\u003eInnokin EZ Watt Kit (with T20S tank)\u003c\/li\u003e\n\u003cli\u003eInnokin Prism T20S Tank\u003c\/li\u003e\n\u003cli\u003eInnokin APEX Kit (with APEX tank)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Innokin Prism S coils are \u003cstrong\u003enot\u003c\/strong\u003e compatible with the following Innokin devices — these tanks use a completely different coil platform:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eInnokin Endura T18 \/ T18E \/ T18E Pro\u003c\/li\u003e\n\u003cli\u003eInnokin Endura T20 (the original T20 — not the T20S)\u003c\/li\u003e\n\u003cli\u003eInnokin Endura T22\u003c\/li\u003e\n\u003cli\u003eInnokin iClear30 \/ iClear30S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eIf you own any of the above devices, you need the Innokin T18E replacement coils — available separately. Please check your device carefully before ordering to ensure the Prism S coils fit your tank.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your Prism S Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstalling a fresh Prism S coil is one of the most straightforward coil-change processes available — the no-spill coil swap system makes it quick, clean, and completely tool-free. Unscrew the base of your T20S or compatible Innokin tank, then pull the old coil straight out vertically without twisting. Before fitting the fresh coil, prime it by applying two to three drops of e-liquid directly onto the exposed Japanese organic cotton wicking visible at the top and sides of the coil, then push the primed coil firmly into the coil seat. Screw the tank base back on securely, fill your tank with e-liquid through the top fill port, and wait at least three to five minutes for the cotton to fully saturate before taking your first puff. Start at the lower end of the recommended wattage range and work up gradually over the first few draws to bed the coil in gently and get the best possible flavour throughout its lifespan.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Prism S Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInnokin Prism S coils are widely praised among MTL vapers for their longevity — many regular T20S users report two to three weeks or more from a single coil at moderate daily vaping with the right e-liquid. The 1.5Ω in particular is known for excellent coil life at its low operating wattage. The most reliable sign a coil needs replacing is a change in flavour — a muted, flat, or burnt character means the Japanese cotton is spent, and it's time for a fresh coil. Reduced vapour production or a slight gurgling sound during a draw are secondary indicators. Keeping the tank topped up at all times and never vaping on a near-empty tank will extend coil life significantly — a dry wick is the fastest way to shorten coil lifespan and introduce a burnt taste. With five individually wrapped coils in every pack, you always have replacements ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCoil\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or 60VG+\u003c\/td\u003e\n\u003ctd\u003e3mg–10mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.9Ω Mesh\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or high-PG\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt or 3mg–6mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.5Ω\u003c\/td\u003e\n\u003ctd\u003eHigh-PG or 50\/50 VG\/PG\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nicotine salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with the 1.5Ω and 0.9Ω Prism S coils, delivering a satisfying, accurate MTL experience at the recommended wattages. High-VG e-liquids of 70VG or above are not recommended with any of the three Prism S options — the thicker consistency will not wick efficiently through the Japanese cotton at these resistance levels and will result in dry hits.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x individually wrapped Prism S replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.8Ω \/ 0.9Ω Mesh \/ 1.5Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Construction\u003c\/td\u003e\n\u003ctd\u003eRound wire (0.8Ω \u0026amp; 1.5Ω) \/ Mesh (0.9Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003e100% pure Japanese organic cotton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e16W–18W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.9Ω Mesh)\u003c\/td\u003e\n\u003ctd\u003e13W–15W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.5Ω)\u003c\/td\u003e\n\u003ctd\u003e6W–10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003eRestricted DTL \/ Warm MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.9Ω)\u003c\/td\u003e\n\u003ctd\u003eMTL \/ Light RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (1.5Ω)\u003c\/td\u003e\n\u003ctd\u003eTight cigarette-style MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 or 60VG+ freebase — 3mg–10mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.9Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 or high-PG — nic salts 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (1.5Ω)\u003c\/td\u003e\n\u003ctd\u003eHigh-PG or 50\/50 — nic salts 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Installation\u003c\/td\u003e\n\u003ctd\u003eNo-spill coil swap — 510 pin base pull-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Tanks\u003c\/td\u003e\n\u003ctd\u003eEndura T20S, Prism T20S, EZ Watt (T20S tank), APEX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eT18 \/ T18E \/ T18E Pro \/ T20 \/ T22 \/ iClear30 \/ iClear30S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003eIndividually wrapped — 5 per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Innokin Prism S Replacement Coils (resistance of choice) — individually wrapped\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eCompatible with the Innokin Endura T20S, Prism T20S, EZ Watt Kit, and APEX Kit only. Not compatible with the T18, T18E, T18E Pro, T20, T22, iClear30, or iClear30S. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"0.8 Ohm \/ 5","offer_id":39392869122247,"sku":"Innokin-Prism-S-Coils-0.8 Ohm","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/prismscoils.jpg?v=1615631202"},{"product_id":"innokin-t18e-coil","title":"Innokin Prism T18E Replacement Coils","description":"\u003cp dir=\"ltr\"\u003eThe Innokin Prism T18E Replacement Coils are the genuine, official replacement coils for the Innokin T18E tank family — a focused, well-crafted MTL coil range built around Innokin's Prism convection airflow design, 100% Japanese organic cotton wicking, and the same no-spill coil swap system found across the wider Innokin coil range. Sold in a pack of five and available in three resistance options — 1.5Ω, 1.7Ω, and a 1.5Ω Mesh version — the T18E coils are designed specifically for vapers who want the tightest, most authentic cigarette-style mouth-to-lung draw available from any compact Innokin starter kit, making them one of the most popular and consistently well-regarded MTL coil ranges in the UK for anyone making the switch from cigarettes.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOne very important point before ordering — despite looking extremely similar to the older T18 coil, the T18E coils are a completely different product and are \u003cstrong\u003enot\u003c\/strong\u003e interchangeable. The T18E coil is shorter and features three wicking port holes on the side, while the standard T18 coil is longer and features five port holes. Using the wrong coil will cause leaks or no vapour production. Please check your device carefully before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePrism Convection Airflow — The Key to the T18E's Exceptional Draw\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe defining technical feature of the Innokin Prism T18E coil is Innokin's patented Prism convection airflow design — and understanding what it does helps explain why the T18E is widely regarded as one of the best starter kit coils for former smokers available in the UK.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRather than drawing air around the outside of the coil head before it reaches the coil element, the Prism convection design pushes air directly through the coil core — straight through the centre of the heating element and directly over the wicked surface. This direct core airflow concentrates the draw and ensures the vapour carries maximum flavour from the coil to the mouthpiece without losing character on the way. The result is a tighter, warmer, more focused MTL draw that feels genuinely natural and satisfying to former smokers—closer to the real thing than many competing starter kit coils can achieve—and a richer, more accurate flavour from every puff. Combined with the Japanese organic cotton wicking, the convection airflow design makes the T18E coil one of the finest MTL coil designs available at any price point.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e100% Pure Japanese Organic Cotton — Clean, Flavour-True Wicking\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Innokin T18E coil — across all three resistance options — is wicked with 100% pure Japanese organic cotton through twelve oval wicking ports that ensure rapid, consistent e-liquid absorption from all directions at once. The organic cotton is completely free from bleach, fungicides, pesticides, colourings, and other processing impurities — giving you a completely clean, neutral wicking base that lets your chosen nicotine salt or 50\/50 e-liquid come through with full accuracy and purity from the very first puff right through to the very last. It uses the same premium wicking material found across Innokin's wider coil range. This is one of the key reasons the T18E coil consistently delivers a clean, satisfying flavour experience without the slightly plasticky or artificial aftertaste that can occur with lesser wicking materials.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThree Resistance Options — Choosing the Right T18E Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.5Ω Prism T18E Coil\u003c\/strong\u003e — 9W–13.5W\u003cbr\u003eThe most popular and widely used option in the T18E range — a tight, cool, cigarette-like MTL coil that operates at just 9–13.5W and delivers the most authentic replication of a cigarette draw that the T18E platform can produce. The draw is restricted and cool, the vapour output is modest and discreet, and the throat hit at 20mg nic salt strength is satisfying and immediate without any harshness. The convection airflow design makes every puff feel focused and natural — not sharp or clinical, but genuinely cigarette-like in a way that makes this coil an outstanding choice for former smokers making the switch for the first time. The low operating wattage also means excellent battery economy — the T18E kit battery will last noticeably longer with the 1.5Ω than with lower-resistance options. Best with high-PG e-liquids and nicotine salts at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.5Ω Prism T18E Mesh Coil\u003c\/strong\u003e — 9W–13.5W\u003cbr\u003eThe same resistance as the standard 1.5Ω wire coil but built with a mesh heating element instead of round Kanthal wire — bringing the improved heat distribution and enhanced flavour clarity of mesh technology to the tight MTL draw the T18E is known for. The mesh surface heats e-liquid across a wider, more uniform area than the wire coil, delivering a cleaner, more nuanced flavour profile and a slightly smoother vapour that experienced vapers will notice immediately. The draw and wattage range are essentially identical to the standard 1.5Ω — the difference is purely in flavour quality and consistency. If you already love the T18E's MTL draw and want clearer flavour without changing your vaping style, the mesh version is the natural next step. Best with high-PG e-liquids and nicotine salts at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.7Ω Prism T18E Coil\u003c\/strong\u003e — 11.5W–13.5W\u003cbr\u003eThe highest resistance option in the T18E range — delivering the coolest, most restricted draw of the three and operating at a comfortable 11.5–13.5W that's well within the range of any compatible Innokin device. The 1.7Ω is the choice for vapers who want the absolute tightest, most cigarette-like experience the T18E can deliver — even cooler and more restricted than the 1.5Ω, with a slightly smaller vapour output and a draw that feels particularly familiar to former lighter smokers or those who smoked slim cigarettes. A focused, niche choice that suits a specific preference but delivers exactly what it promises. Best with high-PG e-liquids and nicotine salts at 10mg or 20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNo-Spill Coil Swap — Clean, Quick, and Tool-Free\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLike all Innokin Prism series coils, the T18E coils use Innokin's no-spill coil swap system for a clean, mess-free coil change every time. Instead of accessing the coil from the top of the tank, you access the T18E coils from the base — unscrew the base of the tank to expose the coil, unscrew the old coil anticlockwise and remove it, screw in the fresh, primed coil clockwise, and reattach the base. The sealed tank body keeps the e-liquid chamber closed and contained throughout the process, preventing the spills and drips that top-fill coil changes can sometimes produce. From opening the coil pack to vaping on a fresh coil takes less than two minutes — no tools, no mess, and no complicated steps.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full T18E Family\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInnokin T18E replacement coils are compatible with the following Innokin tanks and kits:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eInnokin Endura T18E Kit\u003c\/li\u003e\n\u003cli\u003eInnokin Endura T18E Pro Kit\u003c\/li\u003e\n\u003cli\u003eInnokin Endura T18 II (T18 Two)\u003c\/li\u003e\n\u003cli\u003eInnokin Endura T18 II Mini\u003c\/li\u003e\n\u003cli\u003eInnokin Endura T18X Kit\u003c\/li\u003e\n\u003cli\u003eInnokin Prism T18E Tank\u003c\/li\u003e\n\u003cli\u003eInnokin Prism T18E Pro Tank\u003c\/li\u003e\n\u003cli\u003eInnokin Endura T22E Kit\u003c\/li\u003e\n\u003cli\u003eInnokin Endura T22 Pro Kit \u003cem\u003e(1.7Ω recommended for T22 Pro)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eInnokin Endura M18 Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCritical compatibility note — please read before ordering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Innokin T18E coil and the standard Innokin T18 coil look almost identical but are \u003cstrong\u003ecompletely different products and\u003c\/strong\u003e are \u003cstrong\u003enot interchangeable\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eT18E coil\u003c\/strong\u003e — shorter body, \u003cstrong\u003e3 wicking port holes\u003c\/strong\u003e on the side — fits the T18E, T18 II, T18X, T18E Pro, T22E, T22 Pro, and M18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard T18 coil\u003c\/strong\u003e — longer body, \u003cstrong\u003e5 wicking port holes\u003c\/strong\u003e on the side — fits the original T18 and T22 tanks only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eFitting a T18E coil in an original T18 tank, or a T18 coil in a T18E tank, will result in leaking, no vapour production, or device damage. If you are unsure which coil your device uses, count the wicking port holes on the existing coil before ordering.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eT18E coils are also not compatible with the Innokin Prism S (T20S) range\u003c\/strong\u003e—those devices use Innokin Prism S coils, available separately at QSS Vape.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your T18E Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstalling a fresh T18E coil uses the same no-spill coil swap system as the wider Prism range. Unscrew the base of your compatible Innokin tank anticlockwise and set it aside — the old coil will be visible and accessible inside the base section. Unscrew the old coil anticlockwise to remove it, then prime the fresh coil by applying two to three drops of e-liquid directly onto the exposed Japanese organic cotton wicking ports around the coil body. Screw the fresh coil in clockwise until it seats firmly — without over-tightening. Reattach the tank base, fill with e-liquid, and wait at least three to five minutes for the cotton to fully saturate before taking your first puff. Start at the lower end of the recommended wattage range and work up gradually over the first few draws to bed the coil in gently and get the best possible flavour and lifespan from every coil.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your T18E Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInnokin T18E coils are well-regarded for their longevity — particularly the 1.5Ω and 1.7Ω options at their low operating wattages, which many regular T18E users report lasting two to three weeks or more with moderate daily vaping. The most reliable sign a coil needs replacing is a change in flavour — a flat, muted, or slightly burnt taste indicates the cotton is spent. Reduced vapour production or a slight gurgling sound during a draw are secondary indicators. Keeping the tank topped up at all times significantly extends coil life — a dry wick at the bottom of an empty tank is the fastest way to shorten coil lifespan and introduce a burnt taste. With five coils in every pack, you'll always have a fresh one ready to go.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll three T18E coil options are designed for use with high-PG e-liquids and 50\/50 VG\/PG freebase or nicotine salt formulas. The Prism convection airflow and Japanese organic cotton wicking are specifically optimised for the thinner consistency of these e-liquid types — ensuring fast, efficient wicking at the resistance levels and wattages the T18E coils operate at.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with all three T18E coil options, delivering a clean, satisfying MTL experience with an authentic throat hit at the recommended wattages.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHigh-VG e-liquids of 70VG or above are not recommended — the thicker consistency will not wick efficiently through the cotton at these resistance levels. This can cause dry hits and premature coil failure.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x individually wrapped T18E replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e1.5Ω \/ 1.5Ω Mesh \/ 1.7Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Construction\u003c\/td\u003e\n\u003ctd\u003eKanthal wire (1.5Ω \u0026amp; 1.7Ω) \/ Mesh (1.5Ω Mesh)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow Design\u003c\/td\u003e\n\u003ctd\u003ePrism convection — direct core airflow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003e100% pure Japanese organic cotton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Ports\u003c\/td\u003e\n\u003ctd\u003e12 oval wicking ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.5Ω)\u003c\/td\u003e\n\u003ctd\u003e9W–13.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.5Ω Mesh)\u003c\/td\u003e\n\u003ctd\u003e9W–13.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.7Ω)\u003c\/td\u003e\n\u003ctd\u003e11.5W–13.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style\u003c\/td\u003e\n\u003ctd\u003eMTL (Mouth-to-Lung) — all three options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid\u003c\/td\u003e\n\u003ctd\u003eHigh-PG or 50\/50 VG\/PG — nic salts 10mg \u0026amp; 20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eHigh-VG e-liquids (70VG or above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Installation\u003c\/td\u003e\n\u003ctd\u003eNo-spill coil swap — screw-fit base access\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Tanks\u003c\/td\u003e\n\u003ctd\u003eT18E, T18E Pro, T18 II, T18 II Mini, T18X, T22E, T22 Pro, M18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eOriginal T18 \/ T22 \/ T20 \/ T20S \/ Prism S devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIdentification\u003c\/td\u003e\n\u003ctd\u003e3 wicking port holes (T18E) vs 5 holes (standard T18)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003eIndividually wrapped — 5 per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuthenticity\u003c\/td\u003e\n\u003ctd\u003eScratch-and-verify sticker included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Innokin Prism T18E Replacement Coils (resistance of choice) — individually wrapped\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCompatible with the Innokin T18E, T18E Pro, T18 II, T18 II Mini, T18X, T22E, T22 Pro, and M18 devices only. NOT compatible with the original Innokin T18, T22, or T20S. Please check your device before ordering. Devices and e-liquid sold separately at QSS Vape.\u003c\/span\u003e\u003c\/p\u003e","brand":"Innokin","offers":[{"title":"1.5 Ohm \/ 5","offer_id":39392869384391,"sku":"Innokin-T18E-Coil-1.5 Ohm","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/innokin-prism-t18e-coils.jpg?v=1615631205"},{"product_id":"smok-nord-coils","title":"Smok Nord Coils","description":"\u003cp\u003eThe Smok Nord Coils come in various resistances and structures, which allow you to meet your different vaping needs and bring you optimal vaping experience. \u003c\/p\u003e\n\u003cp\u003eSmok Nord Coils are compatible with Smok Nord Kit and Pod Cartridges. \u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/Picture1_daab1438-5edb-4443-8104-d6cbd41487e7.png?v=1615305739\"\u003e\n\n\u003ch2\u003e\u003cu2\u003eCoil Options\u003c\/u2\u003e\u003c\/h2\u003e \n\u003cul\u003e\n\u003cli\u003eRegular 1.4ohm\u003c\/li\u003e\n\u003cli\u003eMesh 0.8 Ohm\u003c\/li\u003e\n\u003cli\u003eMesh 0.6ohm\u003c\/li\u003e \n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/Picture2_6196148d-0a02-41cc-9fa0-08012a838c44.png?v=1615305740\"\u003e\n\u003ch2\u003e\u003cu2\u003eContent\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eIt comes with\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x SMOK Nord Replacement Coil 5pcs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smok","offers":[{"title":"1.4 Ohm Regular \/ 5","offer_id":39392870793415,"sku":"Smok-Nord-Coils-1.2 Ohm","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm Mesh \/ 5","offer_id":39392870826183,"sku":"Smok-Nord-Coils-0.8 Ohm","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm Mesh \/ 5","offer_id":39392870858951,"sku":"Smok-Nord-Coils-0.6 Ohm","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/SMOK-Nord-Replacement-Coil-5pcs_00554740bd83.jpg?v=1615631217"},{"product_id":"smok-rpm-coils","title":"Smok RPM Coils","description":"\u003cp\u003eSMOK RPM Coils are compatible with SMOK RPM Kits, with a wide variety of coils, you will find the perfect coil to suit your need. \u003c\/p\u003e \n\u003ch2\u003e\u003cu2\u003eCoil Option\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMesh 0.4ohm\u003c\/li\u003e\n\u003cli\u003eQuartz 1.2ohm\u003c\/li\u003e\n\u003cli\u003eSC 1.0ohm\u003c\/li\u003e\n\u003cli\u003eTriple 0.6ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/Picture1_7bd393c6-d4f2-4ebd-9030-20d12194d9b1.png?v=1615307630\"\u003e\n\u003ch2\u003e\u003cu2\u003eContent\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eIt comes with\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x SMOK RPM 40 Replacement Coil 5pcs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Smok","offers":[{"title":"1.0 Ohm \/ 5","offer_id":39392872071367,"sku":"Smok-RPM-Coils-1.0 Ohm","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm \/ 5","offer_id":39392872104135,"sku":"Smok-RPM-Coils-0.6 Ohm","price":13.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm \/ 5","offer_id":39392872136903,"sku":"Smok-RPM-Coils-0.4 Ohm","price":13.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/SMOk-RPM-coils.jpg?v=1615631223"},{"product_id":"uwell-valyrian-coils","title":"Uwell Valyrian Coils","description":"\u003cp\u003eThe Uwell Valyrian coil is designed to provide the best flavour and vapour production; the Uwell Valyrian Coil uses a parallel coil design. A wide hole for the base connection makes for a coil with big airflow and tons of flavour.\u003c\/p\u003e\n \n\n\u003ch2\u003e\u003cu2\u003eCoil Options\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e0.15ohm Dual Coil - rated for 95-120W\u003c\/li\u003e\n\u003cli\u003e0.18ohm Mesh Coil - rated for 90-100W\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cu2\u003eContent\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eIt comes with\u003c\/b\u003e\u003c\/p\u003e \n\u003cul\u003e\n\u003cli\u003e1 x Uwell Valyrian Coils Pack of 2\u003c\/li\u003e\n\u003c\/ul\u003e ","brand":"Uwell","offers":[{"title":"0.15 Ohm \/ 2","offer_id":39392874430663,"sku":"Uwell-Valyrian-Coils-0.15 Ohm","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.18 Mesh \/ 2","offer_id":39392874463431,"sku":"Uwell-Valyrian-Coils-0.18 Mesh","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/Valyrian_Coil.jpg?v=1615631236"},{"product_id":"vaporesso-gt-coils","title":"Vaporesso GT Coils","description":"\u003cp\u003eVaporesso NRG GT Coil is designed for Vaporesso NRG\/ NRG SE tanks.  With a variety coils ranging from 40w ? 110w, you?ll be able to get the right coil for you.\u003c\/p\u003e \n\u003ch2\u003e\u003cu2\u003eCoil Options:\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGT2: 0.4ohm (40-80W) \u003c\/li\u003e\n\u003cli\u003eGT4: 0.15ohm (30-70W) \u003c\/li\u003e\n\u003cli\u003eGT6: 0.2ohm (40-100W) \u003c\/li\u003e\n\u003cli\u003eGT8: 0.15ohm (60-110W) \u003c\/li\u003e\n\u003cli\u003eGT CCELL Ceramic: 0.5ohm (20-35W) \u003c\/li\u003e\n\u003cli\u003eGT CCELL 2: 0.3ohm (40-80W) \u003c\/li\u003e\n\u003cli\u003eGT Mesh: 0.18ohm (50-85W) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cu2\u003eContent\u003c\/u2\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eIt comes with\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 3pcs Vaporesso NRG GT Core Coil\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vaporesso","offers":[{"title":"GT4 \/ 3","offer_id":39392875151559,"sku":"Vaporesso-GT-Coils-GT4","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"GT8 \/ 3","offer_id":39392875184327,"sku":"Vaporesso-GT-Coils-GT8","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"cCell \/ 3","offer_id":39392875217095,"sku":"Vaporesso-GT-Coils-cCell","price":10.0,"currency_code":"GBP","in_stock":false},{"title":"Ccell 2 \/ 3","offer_id":39392875249863,"sku":"Vaporesso-GT-Coils-Ccell 2","price":10.0,"currency_code":"GBP","in_stock":false},{"title":"Mesh \/ 3","offer_id":39392875282631,"sku":"Vaporesso-GT-Coils-Mesh","price":10.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/products\/GT_CORE_Coils.jpg?v=1615631242"},{"product_id":"voopoo-pnp-coils","title":"Voopoo PnP Replacement Coils","description":"\u003cp dir=\"ltr\"\u003eThe Voopoo PnP Replacement Coils are the genuine, official replacement coils for one of the most celebrated and widely used coil platforms in the UK vaping market. PnP stands for Plug and Play — and that name tells you everything you need to know about what makes this coil system so popular. No threading, no screwing, no complicated alignment — push the coil in, and vape. Voopoo has refined this brilliantly simple system over multiple generations of hardware into one of the most consistently reliable, flavour-forward, and versatile coil platforms from any brand.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAvailable at QSS Vape in four carefully selected options — the \u003cstrong\u003ePnP VM1 0.3Ω\u003c\/strong\u003e, \u003cstrong\u003ePnP VM5 0.2Ω\u003c\/strong\u003e, \u003cstrong\u003ePnP VM6 0.15Ω\u003c\/strong\u003e, and \u003cstrong\u003ePnP TM2 0.8Ω\u003c\/strong\u003e — these coils cover a wide range of vaping styles from tight, satisfying MTL nic salt vaping all the way through to full DTL cloud chasing at high wattage. Every coil in the PnP range uses premium mesh construction for even heat distribution, faster ramp-up, and better flavour accuracy than conventional round-wire coils — and every pack contains five coils, giving you excellent ongoing value however you vape.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The coils stocked at QSS Vape are the standard Voopoo PnP coils — not the newer PnP-X range. PnP-X coils are designed for the Drag X2, X3, S2, and S3 devices and are not interchangeable with the standard PnP coils described here.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP Plug and Play — Why It Works So Well\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Voopoo PnP system was designed from the ground up to make coil changes as fast, clean, and effortless as possible — and it remains one of the very best coil installation systems available from any brand in the UK vape market. Each PnP coil is a self-contained, push-fit unit with organic cotton wicking and a pre-installed mesh heating element. To swap a coil, pull the old one out of the Pod or tank, push the fresh primed coil into the coil seat until it clicks firmly into place, and vape: no threading, no screwing, no risk of cross-threading or over-tightening. The whole process takes under thirty seconds from start to finish, making the PnP system one of the most practical and user-friendly coil platforms for everyday use.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe same push-fit system works identically across the entire Voopoo PnP coil range — so switching between the VM1, VM5, VM6, and TM2 to explore different vaping styles on the same device is as simple as swapping one coil for another.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe Four Coils — Choosing the Right PnP Coil for Your Setup\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP VM1 0.3Ω Mesh Coil\u003c\/strong\u003e — 32W–40W | DTL \/ RDL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VM1 is the entry-level DTL coil in the Voopoo PnP range and one of the most popular all-round options in the entire PnP ecosystem. At 0.3Ω and operating at 32–40W, it delivers a warm, flavourful restricted DTL draw that produces solid cloud production and rich, accurate flavour without demanding the very highest wattage outputs from your device. The mesh construction heats e-liquid evenly from the very first puff for consistent, clean flavour throughout the coil's entire lifespan — and the organic cotton wicking ensures fast, efficient e-liquid saturation without flooding.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VM1 is the coil to reach for if you want a satisfying DTL experience from a Voopoo kit without stepping up to the more power-hungry VM5 or VM6 — it's an excellent all-day coil for vapers who want strong flavour and good vapour production at a comfortable, accessible wattage. Best paired with high-VG e-liquids of 60% VG or above. Works well with 70VG\/30PG shortfills from the QSS Vape range at 3mg–6mg freebase strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNot recommended with 20mg nicotine salts — the increased vapour production at 32–40W makes high-strength nic salts uncomfortably harsh at this wattage.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP VM5 0.2Ω Mesh Coil\u003c\/strong\u003e — 40W–60W | DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VM5 is a significant step up from the VM1 — a full DTL mesh coil that operates at 40–60W and delivers a noticeably warmer, more open draw, with substantially greater cloud production and a more intense flavour profile. This is the coil for vapers who want to get serious about cloud and flavour performance from their Voopoo kit — the jump from 0.3Ω to 0.2Ω is immediately and clearly perceptible in the warmth, density, and depth of every draw.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VM5 requires a device that can comfortably sustain 40W or above for best results — check your device's maximum wattage output before choosing this coil. Paired with the right device and a quality high-VG shortfill, the VM5 delivers an outstanding cloud-chasing, flavour-forward DTL experience that rivals much more expensive coil setups. Best with high-VG e-liquids of 70% VG or higher at 3mg freebase strength. 50\/50 e-liquids at lower nicotine strengths also work well. Not recommended with 20mg nic salts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP VM6 0.15Ω Mesh Coil\u003c\/strong\u003e — 60W–80W | DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VM6 is the flagship DTL coil in the Voopoo PnP standard range — the most powerful, the warmest, and the most cloud-forward option available, running at 60–80W for an intense, full-on direct-to-lung experience that delivers maximum vapour production and the deepest, most saturated flavour the PnP platform can produce. The 0.15Ω resistance requires a device with strong power delivery — your kit needs to sustain 60W or above at minimum comfortably, and ideally closer to 80W for the best results.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VM6 is for experienced DTL vapers who know exactly what they want and run a capable high-wattage Voopoo kit like the Drag X, Drag 4, or Argus series. At 60–80W with a good high-VG shortfill, the flavour and cloud production are genuinely impressive—bold, warm, and deeply satisfying with every draw. Despite the small wicking holes on the coil, the VM6 actually works best with 50\/50 VG\/PG e-liquids at lower nicotine strengths as well as 70VG+ shortfills — the smaller holes wick thinner liquids efficiently and consistently. Not recommended with 20mg nic salts at this wattage under any circumstances.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP TM2 0.8Ω Mesh Coil\u003c\/strong\u003e — 12W–18W | MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe TM2 is the standout MTL coil in the Voopoo PnP range and what makes the PnP platform such a genuinely versatile system. Operating at just 12–18W with a single mesh coil construction, the TM2 delivers a warm, flavourful mouth-to-lung draw that's noticeably more satisfying than conventional round-wire MTL coils of the same resistance—the mesh element heats more evenly and efficiently, extracting more flavour from your chosen e-liquid with every draw.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe TM2 sits at a comfortable 0.8Ω — above sub-ohm territory — making it the ideal pairing with nicotine salt e-liquids at 10mg or 20mg strength and 50\/50 freebase e-liquids at lower nicotine concentrations. It's a particularly brilliant choice for vapers who use a capable Voopoo device like the Drag Baby or Vinci for nic salt vaping and want a warm, flavourful MTL experience without the full sub-ohm intensity of the VM series coils. The low operating wattage also means significantly better battery life and lower e-liquid consumption than higher-powered VM coils, making the TM2 one of the most economical coils in the PnP range for everyday MTL use. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — PnP Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll four Voopoo PnP coils stocked at QSS Vape are compatible with the full range of Voopoo devices running the standard PnP coil platform, including:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVoopoo Drag X\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag S\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag 4\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag Baby Trio\u003c\/li\u003e\n\u003cli\u003eVoopoo Vinci \/ Vinci R \/ Vinci X\u003c\/li\u003e\n\u003cli\u003eVoopoo Vinci Pod Mod\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus GT \/ Argus Pro \/ Argus X\u003c\/li\u003e\n\u003cli\u003eVoopoo Find Trio\u003c\/li\u003e\n\u003cli\u003eVoopoo Navi\u003c\/li\u003e\n\u003cli\u003eVoopoo PnP Pod Tank\u003c\/li\u003e\n\u003cli\u003eVoopoo V.SUIT Pod Kit \u003cem\u003e(check max wattage before using VM5\/VM6)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant compatibility and wattage notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eAlways check your device's maximum wattage output before selecting a coil — the VM5 requires 40W+, the VM6 requires 60W+. Using these coils in a device that cannot reach their recommended wattage will result in poor flavour and premature coil failure.\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003eVM5 and VM6\u003c\/strong\u003e are not recommended for lower-wattage Pod kits below 40W — please ensure your device can reach the coil's minimum recommended wattage before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePnP coils are not compatible with the Drag X2, Drag X3, Drag S2, or Drag S3\u003c\/strong\u003e — those devices use the newer PnP-X coil platform, which is a different product and not interchangeable with the standard PnP range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your PnP Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstalling a Voopoo PnP coil is one of the most satisfying coil-change experiences in vaping — the push-fit system works exactly as the name promises. Remove the Pod or tank from your device, locate the coil seat, and pull the old coil straight out. Before fitting the fresh coil, prime it by applying three to five drops of e-liquid directly onto the exposed organic cotton wicking visible through the ports on the coil body — allow it to soak for three to five minutes. Push the primed coil firmly into the coil seat until it clicks securely into place, reattach the Pod or tank, fill with e-liquid, and start at the lower end of the recommended wattage range. Work up gradually over the first few draws to bed the coil in gently and extend its lifespan significantly. Never skip the priming step — a dry hit on a fresh unprimed coil is the single most common cause of premature coil failure.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your PnP Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVoopoo PnP coils typically last between one and two weeks of regular daily vaping, with lifespan varying depending on chosen wattage, e-liquid type, and vaping frequency. Sweeter e-liquids and higher wattages shorten coil life — cleaner profiles and moderate wattages extend it. A change in flavour — flat, muted, or burnt — is the clearest sign a coil needs replacing. Reduced vapour production or gurgling during a draw are secondary indicators. With five coils in every pack, you always have a fresh one ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCoil\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eRecommended Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eVM1 0.3Ω\u003c\/td\u003e\n\u003ctd\u003e60VG\/40PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg–6mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVM5 0.2Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVM6 0.15Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 or 70VG+ shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTM2 0.8Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nicotine salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape pair perfectly with the TM2 0.8Ω coil. The full range of 100ml 70VG\/30PG shortfills at QSS Vape pairs brilliantly with the VM1, VM5, and VM6 coils for outstanding DTL performance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x PnP replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Type\u003c\/td\u003e\n\u003ctd\u003eAll mesh — push-fit PnP installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003eOrganic cotton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePush-fit Plug and Play — no tools, no threading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP VM1 Resistance\u003c\/td\u003e\n\u003ctd\u003e0.3Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP VM1 Wattage\u003c\/td\u003e\n\u003ctd\u003e32W–40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP VM1 Vaping Style\u003c\/td\u003e\n\u003ctd\u003eDTL \/ RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP VM5 Resistance\u003c\/td\u003e\n\u003ctd\u003e0.2Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP VM5 Wattage\u003c\/td\u003e\n\u003ctd\u003e40W–60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP VM5 Vaping Style\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP VM6 Resistance\u003c\/td\u003e\n\u003ctd\u003e0.15Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP VM6 Wattage\u003c\/td\u003e\n\u003ctd\u003e60W–80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP VM6 Vaping Style\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP TM2 Resistance\u003c\/td\u003e\n\u003ctd\u003e0.8Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP TM2 Wattage\u003c\/td\u003e\n\u003ctd\u003e12W–18W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePnP TM2 Vaping Style\u003c\/td\u003e\n\u003ctd\u003eMTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (VM1\/VM5\/VM6)\u003c\/td\u003e\n\u003ctd\u003e60VG–70VG+ shortfills — 3mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (TM2)\u003c\/td\u003e\n\u003ctd\u003e50\/50 and nicotine salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eDrag X\/S\/4, Vinci, Argus, Drag Baby Trio, Navi, Find Trio, PnP Pod Tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eDrag X2 \/ X3 \/ S2 \/ S3 (requires PnP-X coils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Voopoo PnP Replacement Coils (VM1 \/ VM5 \/ VM6 \/ TM2 — option of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eStandard PnP coils only — not compatible with the Drag X2, X3, S2, or S3 PnP-X platform. Always verify your device's maximum wattage before selecting VM5 or VM6. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Voopoo","offers":[{"title":"PnP VM1 0.3 Ohm \/ 5","offer_id":39392876298439,"sku":"VOOPOO-PnP-Coils-PnP VM1 0.3 Ohm","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"PnP VM5 0.2 Ohm \/ 5","offer_id":57429417591159,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"Pnp VM6 0.15 Ohm \/ 5","offer_id":57429417623927,"sku":null,"price":11.99,"currency_code":"GBP","in_stock":true},{"title":"TM2 0.8 Ohm \/ 5","offer_id":57429417656695,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/vm1.jpg?v=1788350005"},{"product_id":"geekvape-z-xm-boost-replacement-coils","title":"Geekvape Z XM Boost Replacement Coils","description":"\u003cp dir=\"ltr\"\u003eThe Geekvape Z XM Boost Replacement Coils are the latest generation of replacement coils for the Geekvape Z Series sub-ohm tank platform — the coil range previously known as the Zeus coils, now updated and significantly improved as the Z XM Boost. If you've been running original Z Series coils in your Geekvape tank and looking for the direct replacement, the Z XM Boost is exactly what you need — same push-fit installation, same resistance options, same compatible tanks, but with a meaningfully upgraded mesh and cotton construction that delivers approximately double the coil lifespan and noticeably improved flavour consistency over the original Z coil generation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a pack of five and available in three resistance options — \u003cstrong\u003e0.15Ω (70–85W)\u003c\/strong\u003e, \u003cstrong\u003e0.2Ω (70–80W)\u003c\/strong\u003e, and \u003cstrong\u003e0.4Ω (50–60W)\u003c\/strong\u003e— the Z XM Boost coils cover the full DTL sub-ohm performance range from moderate high-wattage vaping right up to the most powerful, cloud-forward sub-ohm experience the Z Series platform can deliver. Every coil uses Kanthal A1 mesh throughout for fast, even heating and consistently excellent flavour from first puff to last — and the XM Boost generation is rated for about 50–60ml of e-liquid per coil before needing replacement.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eXM Boost Technology — What Makes It Different\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe XM Boost designation isn't just a name change — it represents a genuine generational improvement over the original Z Series coils in three key areas that matter most to serious DTL vapers.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExtended Coil Lifespan:\u003c\/strong\u003e The original Z Series coils were rated for approximately 25–30ml of e-liquid per coil under normal use. The Z XM Boost generation doubles that to approximately 50–60ml per coil — meaning roughly twice as many days of vaping from every pack of five, and a meaningfully lower ongoing cost per puff that adds up significantly over time.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImproved Flavour Consistency:\u003c\/strong\u003e The upgraded Kanthal A1 mesh construction and refined cotton wicking in the XM Boost coils maintain flavour quality more consistently throughout the coil's extended lifespan. With the original Z coils, many vapers noticed a gradual decline in flavour clarity and accuracy as the coil approached the end of its life. The XM Boost construction significantly reduces this effect — the flavour you get at 10ml into a fresh coil is much closer to the flavour you get at 50ml.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMouthfeel Booster:\u003c\/strong\u003e The XM Boost coils incorporate Geekvape's Mouthfeel Booster technology — an engineering refinement in the coil's airflow and vapour path that enhances the tactile character of each draw, producing a smoother, more satisfying hit with denser vapour that feels genuinely excellent on every puff.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThree Resistance Options — Choosing the Right Z XM Boost Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.15Ω Z XM Boost Mesh Coil\u003c\/strong\u003e — 70W–85W | Full DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most powerful coil in the Z XM Boost range — an intense, full-on DTL mesh coil for vapers who want the maximum cloud production and the most immersive flavour experience the Z Series platform can deliver. At 70–85W, the 0.15Ω produces the warmest, densest vapour and the most open, unrestricted DTL draw of the three options — a genuinely impressive performance that rewards vapers running capable high-wattage mods like the Aegis Legend 2 or Aegis Legend 3. The 0.15Ω and 0.2Ω are close in wattage range and both suit full DTL vaping — the 0.15Ω runs slightly warmer and pulls slightly more power, making it the choice for vapers who want the absolute ceiling of Z XM Boost performance. Requires a device comfortably capable of sustaining 70W or above. Best with high-VG e-liquids of 70% VG or higher at 3mg freebase strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.2Ω Z XM Boost Mesh Coil\u003c\/strong\u003e — 70W–80W | Full DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA companion to the 0.15Ω at a marginally higher resistance — delivering a very similar full DTL experience at essentially the same wattage range but with a slightly different ramp-up characteristic and heat distribution that some experienced vapers prefer for its subtly smoother draw character. The 0.2Ω is an excellent choice for vapers who already know they love the full DTL experience but want to try a slightly different coil build to compare flavour and vapour output at similar wattages. Like the 0.15Ω, it requires a device capable of sustaining 70W+ comfortably. Best with high-VG e-liquids of 70% VG or higher at 3mg freebase strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.4Ω Z XM Boost Mesh Coil\u003c\/strong\u003e — 50W–60W | DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most accessible and versatile coil in the Z XM Boost range — a slightly higher resistance that operates at a more moderate 50–60W while still delivering a full, satisfying DTL experience with excellent flavour and solid cloud production. The 0.4Ω is the natural starting point for vapers who are new to the Z Series platform or who are running a device that sits more comfortably in the 50–60W range. It's also a genuinely popular all-day coil choice for experienced vapers who want strong DTL performance with better battery economy than the 0.15Ω or 0.2Ω options. The slightly lower wattage means each coil runs at a marginally lower heat load, which can extend coil life beyond the already impressive 50–60ml XM Boost rating. Best with high-VG e-liquids of 70% VG or higher at 3mg freebase strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKanthal A1 Mesh — Built for Performance and Longevity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Z XM Boost coil is built with Kanthal A1 mesh throughout—a material chosen for its outstanding thermal stability, resistance to thermal fatigue, and consistent heating performance across repeated use. Kanthal A1 is prized in coil manufacturing for its ability to reach operating temperature quickly, hold that temperature consistently throughout each draw, and maintain its structural integrity over a far longer lifespan than softer wire materials. The mesh format distributes heat evenly across the full surface of the wicking cotton—eliminating the localised hot spots that can cause uneven flavour and dry hits in conventional round-wire coils—delivering cleaner, more accurate, consistently satisfying flavour from every puff throughout the coil's extended lifespan.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe push-fit installation system means replacing a Z XM Boost coil takes seconds and requires no tools — pull the old coil straight out of the tank base, push the fresh primed coil in until it clicks firmly into place, and vape. The same straightforward system that has made the Geekvape Z Series platform so consistently popular with experienced sub-ohm vapers for years.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full Z Series Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGeekvape Z XM Boost coils are compatible with the following Geekvape tanks and kits:\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eZ Series Tanks (formerly Zeus):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGeekvape Zeus Sub-Ohm Tank\u003c\/li\u003e\n\u003cli\u003eGeekvape Zeus Sub-Ohm Tank SE (2022)\u003c\/li\u003e\n\u003cli\u003eGeekvape Z Sub-Ohm Tank\u003c\/li\u003e\n\u003cli\u003eGeekvape Z Sub-Ohm Tank 5 \u003cem\u003e(paired with Z XM Boost coils)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eGeekvape Z Fli Tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGeekvape Aegis Legend 2 (L200)\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Legend 3\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Max 2 X (M100)\u003c\/li\u003e\n\u003cli\u003eGeekvape T200 (Aegis Touch)\u003c\/li\u003e\n\u003cli\u003eGeekvape Z200\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Solo\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Solo 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Z XM Boost coils use the same push-fit installation as the original Z Series coils and are a direct replacement for that platform—they are fully backwards compatible with all Z Series tanks that previously accepted the original Z coils. If you previously used Z Series coils in your Zeus or Z tank, the Z XM Boost coils are the upgraded direct replacement.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eZ XM Boost coils are \u003cstrong\u003enot\u003c\/strong\u003e compatible with Geekvape's B Series, P Series, Q Series, or any other Geekvape coil platform. Please check your device carefully before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your Z XM Boost Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eReplacing a Z XM Boost coil is a quick, clean push-fit process that takes less than a minute. Ensure the tank has e-liquid before installing the coil— installing a coil into a dry tank can cause the cotton to dry out prematurely. Remove the old coil from the base of the tank by pulling it straight out firmly. Before fitting the fresh coil, prime it by dripping three to five drops of e-liquid directly onto the exposed Kanthal mesh and wicking cotton through the coil's wicking holes; then let it soak for three to five minutes. Push the primed coil firmly into the coil seat until it clicks securely into place — no threading, no twisting, just a clean push-fit. Fill the tank with e-liquid, then start vaping at the lower end of the recommended wattage range and work upwards gradually over the first few draws. Never vape immediately on an unprimed coil — dry hits on a fresh Z XM Boost coil are the most common cause of premature coil failure and can permanently damage the cotton before it ever gets a chance to perform properly.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Z, XM Boost Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Z XM Boost generation is rated for about 50–60ml of e-liquid per coil—roughly one to two weeks of regular daily sub-ohm vaping, depending on frequency, chosen wattage, and e-liquid type. Sweeter e-liquids and the higher wattage options (0.15Ω\/0.2Ω) will naturally shorten coil life, while cleaner profiles and the more moderate 0.4Ω wattage will extend it further. The clearest sign a Z XM Boost coil needs replacing is a noticeable change in flavour—a flat, muted, or slightly scorched taste indicates the Kanthal mesh or cotton is nearing the end of its life. Reduced vapour production and a darker discolouration of the e-liquid in the tank are secondary indicators. With five coils in every pack, you'll always have a fresh one ready to go.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll three Z XM Boost coil options are designed exclusively for high-power DTL sub-ohm vaping and perform best with high-VG e-liquids of 70% VG or higher. This makes the Z XM Boost coil range a natural and outstanding partner for the full selection of 100ml 70VG\/30PG shortfills available at QSS Vape — including the Lancashire Creamery, Future Juice, Wild Roots, Mix Labs, and Just Juice shortfill ranges — all of which pair brilliantly with the Z XM Boost coil platform at the wattages these coils operate at.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNicotine salts and 50\/50 e-liquids are \u003cstrong\u003enot\u003c\/strong\u003e recommended for use with Z XM Boost coils. The high-power DTL wattage ranges make high-strength nicotine salts uncomfortably harsh and can also cause thinner 50\/50 formulas to flood the coil at these operating temperatures. Freebase e-liquids at 3mg or below are the correct pairing for the Z XM Boost platform.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x Z XM Boost replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Generation\u003c\/td\u003e\n\u003ctd\u003eXM Boost — approx. 2x lifespan vs original Z coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Material\u003c\/td\u003e\n\u003ctd\u003eKanthal A1 mesh throughout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003eUpgraded cotton with Mouthfeel Booster\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePush-fit — no tools, no threading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.15Ω \/ 0.2Ω \/ 0.4Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.15Ω)\u003c\/td\u003e\n\u003ctd\u003e70W–85W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.2Ω)\u003c\/td\u003e\n\u003ctd\u003e70W–80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003e50W–60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style\u003c\/td\u003e\n\u003ctd\u003eDTL (Direct-to-Lung) \/ Sub-Ohm — all three options\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Lifespan\u003c\/td\u003e\n\u003ctd\u003eApprox. 50–60ml per coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended E-Liquid\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher — shortfills and high VG freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eNicotine salts \/ 50\/50 e-liquids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial Feature\u003c\/td\u003e\n\u003ctd\u003eMouthfeel Booster — enhanced vapour texture and draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Tanks\u003c\/td\u003e\n\u003ctd\u003eZeus Sub-Ohm, Zeus SE, Z Sub-Ohm, Z Sub-Ohm 5, Z Fli\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Kits\u003c\/td\u003e\n\u003ctd\u003eAegis Legend 2, Aegis Legend 3, Aegis Max 2 X, T200, Z200, Aegis Solo\/Solo 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eB Series, P Series, Q Series, or other Geekvape platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Geekvape Z XM Boost Replacement Coils (resistance of choice — 0.15Ω, 0.2Ω, or 0.4Ω)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eCompatible with Geekvape Z Series sub-ohm tanks and compatible kits only. Not compatible with Geekvape B Series, P Series, Q Series, or other coil platforms. Always verify your device's maximum wattage before ordering the 0.15Ω or 0.2Ω options. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Geekvape","offers":[{"title":"Boost XM 0.15 Ohm Mesh","offer_id":57431442030967,"sku":null,"price":11.49,"currency_code":"GBP","in_stock":true},{"title":"Boost XM 0.2 Ohm Mesh","offer_id":57431442063735,"sku":null,"price":11.49,"currency_code":"GBP","in_stock":true},{"title":"Boost XM 0.4 Ohm Mesh","offer_id":57431442096503,"sku":null,"price":11.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/geekvape-z-series-pack-5-resistances-z-0_4-ohm-xm-vapevo-5_1200x1200_34ca0cae-0aed-4fbc-bb80-ab824a84926c.jpg?v=1788357185"},{"product_id":"voopoo-pnp-tw-replacement-coils","title":"Voopoo PnP TW Replacement Coils","description":"\u003cp dir=\"ltr\"\u003eThe Voopoo PnP TW Replacement Coils — TW standing for Turbo Watt — are a distinct and genuinely innovative sub-range within Voopoo's legendary PnP coil platform, designed specifically for vapers who want high-wattage DTL and RDTL performance from their Voopoo Pod kit without needing to use high-VG shortfill e-liquids to do it. That's the key distinction that sets the TW series apart from the VM coils — where the VM range requires 60–70% VG or higher shortfills for consistent wicking at high power, the TW coils are engineered with a metal sheath construction and smaller wicking holes that make them perfectly suited to 50\/50 freebase and nicotine salt e-liquids at higher wattages, opening up a vaping style that wasn't possible with the standard PnP VM range.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a pack of five and available in three resistance options — \u003cstrong\u003eTW15 0.15Ω (55–70W)\u003c\/strong\u003e, \u003cstrong\u003eTW20 0.2Ω (40–55W)\u003c\/strong\u003e, and \u003cstrong\u003eTW30 0.3Ω (28–40W)\u003c\/strong\u003e — the TW coils cover everything from a warm, flavour-focused restricted DTL draw at moderate wattages right up to enthusiast-level cloud chasing with dense, rich vapour at 55–70W. Every TW coil uses Voopoo's mesh construction for fast, even heating and consistently excellent flavour, plus the same push-fit PnP installation system that makes coil changes on the entire PnP platform satisfying and effortless.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e The TW coils are standard PnP coils and are not compatible with the newer PnP-X platform (Drag X2, X3, S2, S3). Please check your device carefully before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat Makes the TW Series Different — The Turbo Watt Advantage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Voopoo PnP TW series was developed to solve a specific, real problem with the PnP VM coil range at higher wattages: using 50\/50 and nic salt e-liquids at DTL power levels without flooding, leaking, or inconsistent wicking. The VM coils have larger wicking holes designed to pull thicker high-VG formulas through efficiently — which means thinner 50\/50 and nic salt e-liquids can flow through those holes too quickly at high wattage, causing flooding and gurgling.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe TW coils solve this entirely with a metal sheath construction and carefully sized, smaller wicking holes that regulate e-liquid flow more precisely — preventing flooding while still delivering excellent, consistent saturation to the mesh heating element at higher wattages. The result is a coil that delivers full DTL cloud and flavour performance at 28–70W with the same 50\/50 and nicotine salt e-liquids you'd normally use only in lower-wattage MTL setups. It's a genuinely clever engineering solution that opens up an entirely new dimension of performance from the PnP platform without requiring you to switch to shortfill e-liquids.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVoopoo officially recommend using e-liquids at or below 10mg nicotine strength with the TW15 and TW20 due to the higher wattage output and increased vapour production at those power levels — 20mg nic salts can be used with the TW30 at its more moderate 28–40W range.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThree TW Resistance Options — Choosing the Right Turbo Watt Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP TW15 0.15Ω Mesh Coil\u003c\/strong\u003e — 55W–70W | Full DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most powerful coil in the TW range and the go-to option for vapers who want the maximum cloud production and the most intense, open DTL experience the TW series can deliver. At 55–70W, the TW15 generates substantial, dense vapour with a warm, full-bodied draw that feels genuinely impressive — particularly when paired with a quality 50\/50 e-liquid at 3mg–6mg strength. This is enthusiast-level DTL vaping from a PnP Pod kit — a combination that the VM series cannot replicate with thinner e-liquids.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe TW15 requires a device that can comfortably sustain 55W or above — check your device's maximum wattage output before selecting this coil. Recommended with freebase 50\/50 e-liquids at ≤10mg strength. The TW15 is not compatible with the Voopoo Drag H40 due to its airflow restrictions. Best with 50\/50 VG\/PG freebase e-liquids at 3mg–6mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP TW20 0.2Ω Mesh Coil\u003c\/strong\u003e — 40W–55W | DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA step down in intensity from the TW15 — the TW20 delivers a warm, full DTL experience at a slightly more moderate 40–55W that suits a wider range of Voopoo devices and is more accessible for vapers who want strong TW performance without pushing to the 55–70W ceiling of the TW15. The draw is open and cloud-forward while remaining slightly cooler and more manageable than the TW15, making it an excellent everyday DTL coil for vapers who want Turbo Watt performance at a more comfortable daily vaping wattage—recommended with freebase 50\/50 e-liquids at ≤10mg strength. Best with 50\/50 VG\/PG freebase e-liquids at 3mg–6mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP TW30 0.3Ω Mesh Coil\u003c\/strong\u003e — 28W–40W | Restricted DTL \/ RDTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most accessible and versatile coil in the TW range — the TW30 delivers a warm, flavour-focused restricted DTL draw at a comfortable 28–40W that most Voopoo devices handle easily and efficiently. The slightly higher resistance produces a cooler, more concentrated draw than the TW15 or TW20 while still delivering excellent flavour and satisfying vapour production — sitting right on the boundary between a tight RDTL and a relaxed DTL draw that many vapers find to be the most enjoyable sweet spot for all-day vaping. The more moderate wattage also means better battery economy and lower e-liquid consumption than the higher-powered TW options. The TW30 is also the most nic-salt-friendly coil in the TW range — at 28–40W, you can comfortably use 20mg nicotine salts with the right e-liquid. Best with 50\/50 VG\/PG freebase e-liquids and nicotine salts at 10mg–20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP Push-Fit Installation — Seconds to Swap, Zero Tools\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLike every coil in the Voopoo PnP family, the TW series uses the same push-fit Plug and Play installation system that makes the PnP platform one of the most user-friendly coil setups in the UK vape market. Pull the old coil straight out of the Pod or tank, prime the fresh coil, push it into the coil seat until it clicks firmly into place, and vape. No threading, no screwing, no alignment required — the whole swap takes under thirty seconds from start to finish and needs no tools whatsoever. The same push-fit connection works identically across all three TW coil options and is fully interchangeable with the wider PnP coil range within compatible devices.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — PnP TW Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Voopoo PnP TW coils are compatible with the full range of Voopoo devices running the standard PnP coil platform, including:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVoopoo Drag X\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag S\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag 4\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag Baby Trio\u003c\/li\u003e\n\u003cli\u003eVoopoo Find Trio\u003c\/li\u003e\n\u003cli\u003eVoopoo Vinci \/ Vinci R \/ Vinci X\u003c\/li\u003e\n\u003cli\u003eVoopoo Vinci Pod Mod\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus GT \/ Argus Pro \/ Argus X\u003c\/li\u003e\n\u003cli\u003eVoopoo Navi\u003c\/li\u003e\n\u003cli\u003eVoopoo PnP Pod Tank\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag E60 \u003cem\u003e(TW30 and TW20 recommended — check max wattage)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag H80 \u003cem\u003e(TW30 and TW20 recommended — check max wattage)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant compatibility notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eThe \u003cstrong\u003eTW15 is not compatible with the Voopoo Drag H40\u003c\/strong\u003e — the H40's airflow design is not suited to the TW15's higher wattage requirements\u003c\/li\u003e\n\u003cli\u003eAlways check your device's maximum wattage output before selecting the TW15 or TW20 — these coils require 40W+ and 55W+ respectively.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTW coils are not compatible with the Drag X2, Drag X3, Drag S2, or Drag S3\u003c\/strong\u003e — those devices use the newer PnP-X coil platform, which is not interchangeable with the standard PnP range.e\u003c\/li\u003e\n\u003cli\u003eTW coils are standard PnP format and are interchangeable with other PnP coils (VM, TM, TR) within the same compatible devices — you can mix and match across the PnP range on the same device.ce\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your TW Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePush-fit installation makes TW coil changes among the fastest and cleanest in the UK vape market. Remove the Pod or tank from your device, pull the old coil straight out of the coil seat, and set it aside. Before fitting the fresh coil, prime it by applying three to five drops of your chosen 50\/50 or nic salt e-liquid directly onto the exposed mesh wicking visible through the coil's wicking ports — the smaller wicking holes of the TW coils mean this priming step is particularly important for ensuring the cotton is properly saturated before the first draw. Allow three to five minutes for the e-liquid to absorb into the cotton before vaping fully. Push the primed coil firmly into the coil seat until it clicks securely, reattach the Pod or tank to your device, fill with e-liquid, and start at the lower end of the recommended wattage range — working upwards gradually over your first few draws to bed the coil in properly.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNever skip or shorten the priming step with TW coils — the metal sheath construction and smaller wicking holes mean the cotton needs a few minutes to saturate fully, and vaping on a dry or under-saturated TW coil is the most common cause of the dry hit and premature coil failure that vapers sometimes experience with this coil series.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your TW Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVoopoo PnP TW coils typically last between one and two weeks of regular daily vaping, with lifespan depending on chosen wattage, e-liquid sweetness, and vaping frequency. Higher wattages and sweeter e-liquids will naturally shorten coil life — more moderate wattages and cleaner e-liquid profiles extend it. The clearest sign a TW coil needs replacing is a change in flavour — a muted, flat, or slightly burnt taste is the most reliable indicator the mesh or cotton is spent. Reduced vapour production or a gurgling sound during a draw are secondary signs. With five coils in every pack, you always have a fresh one ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCoil\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTW15 0.15Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase\u003c\/td\u003e\n\u003ctd\u003e≤10mg (3mg–6mg recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTW20 0.2Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase\u003c\/td\u003e\n\u003ctd\u003e≤10mg (3mg–6mg recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTW30 0.3Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt or 3mg–6mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot recommended with any TW coil:\u003c\/strong\u003e High-VG e-liquids of 60VG or above—the smaller wicking holes aren't designed for thicker high-VG formulas and will not wick them consistently at these wattages. Use VM series coils for high-VG shortfills.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair well with the TW30 at 10mg–20mg strength. For the TW15 and TW20, lower-strength freebase 50\/50 e-liquids at 3mg–6mg are the recommended pairing for the best DTL performance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x PnP TW replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePnP TW (Turbo Watt)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Construction\u003c\/td\u003e\n\u003ctd\u003eMesh with metal sheath and smaller wicking holes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePush-fit PnP — no tools, no threading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003eTW15 0.15Ω \/ TW20 0.2Ω \/ TW30 0.3Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (TW15 0.15Ω)\u003c\/td\u003e\n\u003ctd\u003e55W–70W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (TW20 0.2Ω)\u003c\/td\u003e\n\u003ctd\u003e40W–55W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (TW30 0.3Ω)\u003c\/td\u003e\n\u003ctd\u003e28W–40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (TW15)\u003c\/td\u003e\n\u003ctd\u003eFull DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (TW20)\u003c\/td\u003e\n\u003ctd\u003eDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (TW30)\u003c\/td\u003e\n\u003ctd\u003eRestricted DTL \/ RDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (TW15 \u0026amp; TW20)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase — ≤10mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (TW30)\u003c\/td\u003e\n\u003ctd\u003e50\/50 freebase or nic salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eHigh-VG e-liquids (60VG or above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKey Difference from VM\u003c\/td\u003e\n\u003ctd\u003eSuited to 50\/50 and nic salts at high wattage vs VM's high-VG requirement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eDrag X\/S\/4, Vinci, Argus, Drag Baby Trio, Find Trio, Navi, Drag E60, Drag H80, PnP Pod Tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eTW15 — Drag H40. All TW — Drag X2\/X3\/S2\/S3 (PnP-X platform)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Voopoo PnP TW Replacement Coils (TW15, TW20, or TW30 — option of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eStandard PnP coils only — not compatible with the Drag X2, X3, S2, or S3 PnP-X platform. TW15 is not compatible with Drag H40. Always verify your device's maximum wattage before selecting TW15 or TW20. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Voopoo","offers":[{"title":"PnP TW15 0.15 Ohm","offer_id":57431544299895,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"PnP TW20 0.2 Ohm","offer_id":57431544332663,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"PnP TW30 0.3 Ohm","offer_id":57431544365431,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/tw15.jpg?v=1788360045"},{"product_id":"voopoo-pnp-x-replacement-coils","title":"Voopoo PnP X Replacement Coils","description":"\u003cp dir=\"ltr\"\u003eThe Voopoo PnP X Replacement Coils are the next generation of Voopoo's legendary PnP coil platform. This completely redesigned, fourth-generation coil system integrates four advanced technologies into a single coil head. It delivers a genuinely transformative improvement over the original PnP coil range in every area that matters most. Better flavour, longer lifespan, stronger leak protection, and a wider range of compatible vaping styles — the PnP X isn't simply an update to the original PnP platform; it's a fundamental reinvention.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a pack of five and available in five resistance options — \u003cstrong\u003e0.15Ω (60–80W)\u003c\/strong\u003e, \u003cstrong\u003e0.2Ω (40–60W)\u003c\/strong\u003e, \u003cstrong\u003e0.3Ω (32–40W)\u003c\/strong\u003e, \u003cstrong\u003e0.45Ω (25–32W)\u003c\/strong\u003e, and \u003cstrong\u003e0.6Ω (18–23W)\u003c\/strong\u003e — the PnP X coil range covers the complete spectrum of vaping styles from tight MTL nic salt vaping right up to full DTL cloud chasing at 80W, all from the same coil platform and the same compatible devices. Every resistance option uses Voopoo's advanced mesh distributed heating system and thermo-stable cotton — rated for up to 100ml of e-liquid per coil — making the PnP X one of the most long-lasting and cost-effective coil ranges available from any brand in the UK vape market right now.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCritical compatibility note — please read before ordering:\u003c\/strong\u003e\u003cbr\u003eThe PnP X coils are a completely different platform to the standard Voopoo PnP coils (VM, TW, TM, TR series). They are \u003cstrong\u003enot\u003c\/strong\u003e interchangeable with standard PnP coils and will \u003cstrong\u003enot\u003c\/strong\u003e fit older PnP devices. PnP X coils are designed exclusively for the Drag X2, Drag S2, Drag X3, Drag S3, Argus Pro 2, and other PnP X compatible devices. If you are running any older Voopoo kit, you need the standard PnP coil range — available separately at QSS Vape.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFourth Generation Atomisation Technology — Four Technologies in One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe PnP X coil is built around four distinct technological upgrades over the original PnP platform — each addressing a specific weakness of the previous generation and contributing to the genuinely substantial performance improvement the PnP X delivers in everyday use.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1. Advanced Mesh Distributed Heating System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery PnP X coil uses a refined mesh construction that distributes heat more evenly and efficiently across the entire wicking surface than any previous Voopoo coil generation. The automated production process Voopoo introduced for the PnP X platform ensures the mesh structure is consistent and precise across every coil in every pack—eliminating the unit-to-unit variation hand-assembled coils can produce and guaranteeing a consistently high-quality flavour experience from the first coil you open. The mesh surface area improvement over helical round-wire coils results in faster ramp-up, cleaner flavour, and denser vapour at comparable wattages.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e2. Thermo-Stable Cotton — Up to 100ml Coil Life\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most impactful upgrade in the PnP X platform is the introduction of thermo-stable cotton — a premium wicking material optimised for thickness, fibre spacing, and heat resistance for the PnP X coil's operating conditions. The thermo-stable cotton handles higher temperatures without the degradation conventional cotton suffers at elevated wattages — significantly extending coil lifespan and reducing dry hits and burnt taste that can occur with standard cotton at higher power outputs. Each PnP X coil is rated for up to 100ml of e-liquid before needing replacement — equivalent to a full 100ml shortfill per coil. That's an exceptional lifespan for a push-fit Pod coil and represents outstanding ongoing value per pack.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e3. Patented 4-Layer Leakproof Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLeaking has always been the single most common practical complaint about pod-based coil systems — and Voopoo's response with the PnP X is their most comprehensive solution to date. The PnP X housing incorporates a patented 4-layer leakproof design that seals e-liquid at four distinct points: the base seal, the cotton chamber, the airflow channel, and the coil top. A dual L-shaped structure at the base maintains balanced pressure and prevents condensate from working back up the airflow path. The result is a coil system that handles e-liquid with confidence and reliability the original PnP platform—and most competing Pod coil systems—simply cannot match. Whether the device is in your pocket, your bag, or left on its side, the 4-layer seal keeps e-liquid exactly where it should be.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e4. Fully Automated Production — Consistent Quality Every Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVoopoo introduced fully automated manufacturing for the entire PnP X platform—a major quality-control improvement over the original PnP coil production process. Full automation eliminates the inconsistencies that manual assembly introduces, ensuring every coil in every pack meets the same precise specification for mesh density, cotton thickness, resistance tolerance, and housing seal integrity. The result is a coil range where the fifth coil in the pack performs identically to the first — a level of consistency that makes a genuine, perceptible difference to the everyday vaping experience.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFive Resistance Options — Choosing the Right PnP X Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP X 0.15Ω Mesh Coil\u003c\/strong\u003e — 60W–80W | Full DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most powerful coil in the PnP X range — an intense, full-on DTL mesh coil for vapers who want maximum cloud production and the most open, vapour-forward experience the PnP X platform can deliver. At 60–80W, the 0.15Ω produces the warmest, densest vapour of any coil in the range with a wide, completely unrestricted DTL draw that rewards vapers running capable high-wattage devices. The thermo-stable cotton handles the heat load of 80W sustained vaping far better than conventional cotton, maintaining consistent flavour and avoiding the dry hits high-wattage vaping can cause with lesser coil designs. Requires a device capable of sustaining 60W or above. Best with high-VG e-liquids of 70% VG or higher at 3mg freebase strength. Not recommended with nicotine salts at 20mg — Voopoo officially recommend ≤10mg for DTL coils.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP X 0.2Ω Mesh Coil\u003c\/strong\u003e — 40W–60W | DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA full DTL coil at a more accessible wattage range — delivering rich, warm vapour and outstanding flavour with a wide, satisfying direct-to-lung draw at 40–60W that suits a broader range of PnP X compatible devices comfortably. The 0.2Ω produces slightly less intense heat than the 0.15Ω while still delivering a genuinely impressive DTL experience — making it an excellent choice for vapers who want strong cloud and flavour performance without pushing all the way to 80W. A consistently popular all-day DTL coil option across the entire PnP X range. Best with high-VG e-liquids of 70% VG or higher at 3mg freebase strength. Voopoo recommend ≤10mg nicotine strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP X 0.3Ω Mesh Coil\u003c\/strong\u003e — 32W–40W | DTL \/ RDL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe versatile mid-point of the PnP X range — a warm, flavour-focused coil that sits on the boundary between a tight restricted DTL and a relaxed RDL draw at a comfortable 32–40W that most PnP X compatible devices handle easily and efficiently. The 0.3Ω delivers excellent flavour and satisfying vapour at a more moderate wattage than the 0.15Ω or 0.2Ω — making it a genuinely popular all-day choice for vapers who want the flavour quality of the PnP X platform without the battery consumption of the higher-powered options. Works well with both high-VG shortfills and 50\/50 freebase e-liquids at lower nicotine strengths. Best with 50\/50 or 60VG+ e-liquids at 3mg–6mg freebase. Voopoo recommend ≤10mg nicotine strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP X 0.45Ω Mesh Coil\u003c\/strong\u003e — 25W–32W | RDL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA warm, restricted RDL coil that fills the gap between the DTL options above and the MTL 0.6Ω below — delivering a satisfying, slightly open draw at a moderate 25–32W with good flavour and decent vapour production that sits comfortably between the two vaping styles. The 0.45Ω is a versatile everyday option for vapers who want more warmth and vapour than a standard MTL coil without stepping into full DTL territory — and its moderate wattage makes it an excellent choice for battery-conscious vapers who want a comfortable all-day balance between performance and device runtime. Best with 50\/50 VG\/PG freebase e-liquids or lower-strength nicotine salts (6mg–10mg).\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePnP X 0.6Ω Mesh Coil\u003c\/strong\u003e — 18W–23W | RDL \/ MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most accessible and MTL-friendly coil in the PnP X range — a slightly more restricted draw at a low, comfortable 18–23W that produces a warm, flavourful RDL-to-loose-MTL experience with modest, discreet vapour output. The 0.6Ω is the coil for vapers who prefer a tighter, cooler draw and want to use nicotine salt e-liquids or 50\/50 freebase at standard UK strengths without the harsh throat hit that higher-wattage coils can produce with nic salts. The lowest-wattage option in the PnP X range also delivers the best battery economy—the longest runtime per charge of any of the five options. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg–20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePush-Fit Installation — Same Simplicity, New Standard\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eLike the original PnP coils, the PnP X uses a push-fit installation system — pull out the old coil, push in the new primed coil, and vape: no threading, no screwing, no risk of cross-threading. The PnP X's automated manufacturing process ensures the push-fit connection is precisely machined on every coil—clicking firmly and cleanly into place with a satisfying, confidence-inspiring snap every time. The coil change takes under thirty seconds from start to finish and requires no tools whatsoever.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — PnP X Platform Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVoopoo PnP X coils are compatible exclusively with devices running the PnP X coil platform:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVoopoo Drag X2\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag S2\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag X3\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag S3\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus Pro 2\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag E60 \u003cem\u003e(with PnP X Pod cartridge)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoopoo Uforce-X Nano Tank\u003c\/li\u003e\n\u003cli\u003eVoopoo PnP X Pod Cartridges \u003cem\u003e(compatible with selected PnP platform mods)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCritical compatibility notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003ePnP X coils are \u003cstrong\u003ecompletely different\u003c\/strong\u003e to standard Voopoo PnP coils (VM, TW, TM, TR series) and are \u003cb\u003enot interchangeable\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003ePnP X coils will \u003cstrong\u003enot\u003c\/strong\u003e fit any older Voopoo device running the standard PnP coil platform — including the Drag X, Drag S, Vinci, Argus (original), or any other pre-PnP X device.e\u003c\/li\u003e\n\u003cli\u003eIf your device is not listed above, you need the standard Voopoo PnP coil range — available separately at QSS Vape.\u003c\/li\u003e\n\u003cli\u003eVoopoo deliberately chose not to maintain backward compatibility between PnP and PnP X to enable the superior 4-layer leakproof design — it was a design choice, not an oversight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your PnP X Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePull the old coil cleanly out of the PnP X Pod or tank. Before fitting the fresh coil, prime it thoroughly — apply three to five drops of your chosen e-liquid directly onto the exposed thermo-stable cotton through the coil's wicking ports, then let it soak for three to five minutes before vaping. The thermo-stable cotton in PnP X coils is thicker and more precisely optimised than conventional cotton, so it absorbs e-liquid efficiently. However, priming is still essential to ensure full saturation before the first draw. Push the primed coil firmly into the coil seat of the PnP X Pod or tank until it clicks securely into place. Fill with e-liquid, and start vaping at the lower end of the recommended wattage range — working upwards gradually over the first few draws. Skipping the priming step is the most common cause of premature coil failure — thermo-stable cotton handles heat exceptionally well when fully saturated. Still, a dry hit on a fresh, unprimed PnP X coil can damage the cotton before it ever gets the chance to perform at its best.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your PnP X Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe PnP X coil's thermo-stable cotton is rated for up to 100ml of e-liquid per coil — making it one of the longest-lasting push-fit Pod coils available in the UK vape market. For most vapers at a moderate daily pace, that translates to two to four weeks of comfortable all-day vaping from a single coil before flavour quality drops meaningfully. Higher wattages and sweeter e-liquids will naturally shorten the lifespan, while more moderate wattages and cleaner e-liquid profiles can extend it beyond the 100ml rating in some cases. The clearest sign a PnP X coil needs replacing is a change in flavour — a flat, muted, or slightly scorched taste means the cotton has reached the end of its life. Reduced vapour production is a secondary indicator. With five coils per pack, you always have fresh ones ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCoil\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.15Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.2Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.3Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 or 60VG+\u003c\/td\u003e\n\u003ctd\u003e3mg–6mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.45Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase or lower-strength nic salts\u003c\/td\u003e\n\u003ctd\u003e6mg–10mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase and nicotine salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with the 0.6Ω PnP X coil. The full range of 100ml 70VG\/30PG shortfills at QSS Vape pairs brilliantly with the 0.15Ω and 0.2Ω coils for maximum DTL performance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x PnP X replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlatform\u003c\/td\u003e\n\u003ctd\u003ePnP X — 4th generation atomisation technology\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Construction\u003c\/td\u003e\n\u003ctd\u003eAdvanced mesh distributed heating system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003eThermo-stable cotton — up to 100ml coil life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduction\u003c\/td\u003e\n\u003ctd\u003eFully automated — maximum consistency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePush-fit — no tools, no threading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeak Protection\u003c\/td\u003e\n\u003ctd\u003ePatented 4-layer leakproof design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.15Ω \/ 0.2Ω \/ 0.3Ω \/ 0.45Ω \/ 0.6Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.15Ω)\u003c\/td\u003e\n\u003ctd\u003e60W–80W — Full DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.2Ω)\u003c\/td\u003e\n\u003ctd\u003e40W–60W — DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.3Ω)\u003c\/td\u003e\n\u003ctd\u003e32W–40W — DTL \/ RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.45Ω)\u003c\/td\u003e\n\u003ctd\u003e25W–32W — RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e18W–23W — RDL \/ MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Lifespan\u003c\/td\u003e\n\u003ctd\u003eUp to 100ml per coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.15Ω\/0.2Ω)\u003c\/td\u003e\n\u003ctd\u003e70VG+ shortfills — 3mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.3Ω\/0.45Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 or 60VG+ — 3mg–10mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 and nicotine salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eDrag X2, Drag S2, Drag X3, Drag S3, Argus Pro 2, Drag E60, Uforce-X Nano\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eAny standard PnP device — VM\/TW\/TM\/TR coils are a different platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Voopoo PnP X Replacement Coils (resistance of choice — 0.15Ω, 0.2Ω, 0.3Ω, 0.45Ω, or 0.6Ω)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003ePnP X platform only — not compatible with any standard Voopoo PnP device. Check that your device is specifically listed as PnP X compatible before ordering. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Voopoo","offers":[{"title":"PnP X 0.15 Ohm","offer_id":57431635558775,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"PnP X 0.2 Ohm","offer_id":57431635591543,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true},{"title":"PnP X 0.3 Ohm","offer_id":57431635624311,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/0002_PnP_X_Coil_0.15__DTL_ID_Photo_copy_3.jpg?v=1788362530"},{"product_id":"voopoo-tpp-dm-replacement-coils","title":"Voopoo TPP DM Replacement Coils","description":"\u003cp dir=\"ltr\"\u003eThe Voopoo TPP DM Replacement Coils are genuine, official replacement coils for the Voopoo TPP Pod Tank platform—one of the most capable and widely used high-wattage sub-ohm tank systems in the UK vaping market. TPP stands for Tank Pod Platform — and the DM coil range that powers it represents Voopoo's most advanced and performance-focused coil technology outside of the PnP X system, designed specifically for experienced DTL vapers who want maximum cloud production, bold and precise flavour, and the kind of consistent high-wattage performance that lesser coil platforms cannot sustain.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a convenient pack of three and available in four resistance options — \u003cstrong\u003eDM1 0.15Ω (60–80W)\u003c\/strong\u003e, \u003cstrong\u003eDM2 0.2Ω (40–60W)\u003c\/strong\u003e, \u003cstrong\u003eDM3 0.15Ω (80–100W)\u003c\/strong\u003e, and \u003cstrong\u003eDM4 0.3Ω (32–40W)\u003c\/strong\u003e — the TPP DM range covers the full spectrum of DTL vaping from warm, flavour-focused restricted draws at 32–40W all the way up to extreme, cloud-chasing performance at 80–100W. Every coil in the TPP DM range uses Voopoo's patented mesh coil technology with organic cotton wicking, a press-fit installation system that makes coil changes fast and tool-free, and a construction built to sustain the heat load of high-wattage sub-ohm vaping with far greater consistency and longevity than conventional round-wire coil designs.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePatented TPP Coil Technology — Built for Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe TPP DM coils use Voopoo's patented coil technology — a specifically engineered mesh coil construction that increases the atomisation area inside the coil head and improves heating speed over conventional coil designs. By expanding the heated surface area within the coil housing, each puff contacts and vaporises a larger volume of e-liquid simultaneously — producing denser, more saturated vapour with richer, more full-bodied flavour than a smaller-surface coil of the same resistance could achieve at equivalent wattages.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFaster heat-up times mean the vapour reaches full temperature more quickly on every draw — reducing the cool, thin pull that can occur at the start of each puff with slower-ramping coils and delivering a consistently warm, dense, full-flavour hit from the very first inhale. The organic cotton wicking is specifically matched to the mesh element's heat profile, absorbing e-liquid efficiently at the wicking rates required by high-wattage DTL vaping while maintaining even saturation throughout the coil's lifespan.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe press-fit installation system makes coil changes completely tool-free — pull the old coil out and press the fresh primed coil into place until it clicks firmly and securely into the Pod. No threading, no screwing, no alignment required. The whole process takes under thirty seconds every time.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFour DM Coil Options — Choosing the Right TPP Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTPP DM1 0.15Ω Mesh Coil\u003c\/strong\u003e — 60W–80W | Best: 65W–75W | Full DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most popular and widely used coil in the entire TPP DM range — the DM1 is the go-to option for vapers who want an outstanding combination of rich flavour and impressive cloud production at a wattage range that most capable box mods handle comfortably. At 60–80W, with a sweet spot of 65–75W, the DM1 delivers a wide, open DTL draw with warm, dense vapour and a bold, full-bodied flavour profile that showcases the character of high-VG shortfill e-liquids at their best. The DM1 is the natural starting point for vapers new to the TPP platform who want to explore what it can do—consistent, satisfying, and deeply impressive from the first puff. Requires a device that can comfortably sustain 60W. Best with 70VG\/30PG or higher shortfill e-liquids at 3mg freebase strength. Voopoo recommend ≤10mg nicotine strength for all DTL coils.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTPP DM2 0.2Ω Mesh Coil\u003c\/strong\u003e — 40W–60W | Best: 50W–55W | DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA slightly higher resistance than the DM1, delivering a warm, satisfying DTL experience at a more moderate 40–60W that broadens compatibility across a wider range of devices while still producing excellent cloud and flavour output. The DM2 draws slightly less power than the DM1 at its best wattage, meaning better battery economy and a marginally cooler draw—a difference some experienced vapers prefer for extended all-day DTL sessions, where the DM1's heat intensity can become fatiguing over time. The DM2 is an excellent all-day alternative to the DM1 for vapers who want strong TPP performance with slightly gentler battery consumption. Best with 70VG\/30PG or higher shortfill e-liquids at 3mg freebase strength. Voopoo recommend ≤10mg nicotine strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTPP DM3 0.15Ω Mesh Coil\u003c\/strong\u003e — 80W–100W | Best: 85W–95W | Extreme DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most powerful coil in the entire TPP DM range — the DM3 is an enthusiast-level, extreme DTL coil that operates at 80–100W and delivers the most intense, cloud-forward, high-wattage vaping experience the TPP platform can produce. Despite sharing the same 0.15Ω resistance as the DM1, the DM3 is a completely different coil — engineered specifically for sustained high-wattage operation at 80–100W with a mesh construction that handles the extreme heat load of these wattages without the performance degradation that would cause premature coil failure in lesser designs. The cloud production and flavour intensity at 85–95W is genuinely striking — dense, warm, and deeply satisfying in a way that only high-wattage mesh coils can deliver. The DM3 requires a device that can sustain 80W or above — not every box mod will be suitable. Always check your device's maximum rated continuous output before selecting the DM3. Best with 70VG\/30PG or higher shortfill e-liquids at 3mg freebase strength. Voopoo recommend ≤10mg nicotine strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTPP DM4 0.3Ω Mesh Coil\u003c\/strong\u003e — 32W–40W | Half DTL \/ RDL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most accessible and versatile coil in the TPP DM range — the DM4 operates at a comfortable 32–40W and delivers a warm, flavour-forward half-DTL draw that sits right on the boundary between a tight restricted DTL and a relaxed RDL experience. The 0.3Ω resistance makes the DM4 the most battery-friendly coil in the range by a significant margin — delivering excellent flavour and satisfying vapour at a wattage that extends device runtime considerably compared to the DM1, DM2, and DM3 options. The DM4 is an outstanding all-day coil choice for vapers who want genuine TPP flavour quality without committing to the full high-wattage DTL intensity of the other options — and a natural starting point for vapers transitioning from a Pod kit to a full sub-ohm TPP setup for the first time. Works well with both high-VG shortfills and 50\/50 freebase e-liquids at lower nicotine strengths. Best with 70VG\/30PG shortfills or 50\/50 freebase at 3mg–6mg freebase. Voopoo recommend ≤10mg nicotine strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full TPP Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVoopoo TPP DM coils are compatible with the following Voopoo devices and tanks running the TPP coil platform:\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVoopoo Drag 3\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag X Plus\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag X Plus Professional Edition\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag 4 \u003cem\u003e(with TPP Pod Tank)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus GT 2 \u003cem\u003e(with TPP Pod Tank)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTanks:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVoopoo TPP Pod Tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e TPP DM coils are designed exclusively for devices running the Voopoo TPP Pod Tank or TPP coil platform. They are \u003cstrong\u003enot\u003c\/strong\u003e compatible with any of the following Voopoo coil families:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eStandard PnP coils (VM, TW, TM series) — different coil platform\u003c\/li\u003e\n\u003cli\u003ePnP X coils — different coil platform\u003c\/li\u003e\n\u003cli\u003eITO coils — different coil platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003ePlease check your device carefully before ordering to ensure it is compatible with the TPP coil platform. If your device uses the standard PnP system, you need PnP coils — available separately at QSS Vape. If it uses the PnP X system, you need PnP X coils — also available at QSS Vape.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your TPP DM Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTPP DM coils use a press-fit installation system — one of the most straightforward coil-change processes available. Remove the TPP Pod tank or Pod from your device, locate the coil slot at the base of the Pod, and pull the old coil straight out. Before fitting the fresh coil, prime it thoroughly by dripping three to five drops of your high-VG shortfill or freebase e-liquid directly onto the exposed organic cotton wicking visible through the coil's wicking ports. Allow three to five minutes for the e-liquid to fully saturate the cotton. This step is critical at the high wattages TPP coils operate at, where an under-saturated cotton wick can burn on the first draw and permanently compromise the coil's flavour before it reaches peak performance. Press the primed coil firmly into the coil seat until it clicks securely into place. Fill the tank with e-liquid, start at the lower end of the recommended wattage range, and gradually work up over your first few draws.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your TPP DM Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTPP DM coils typically last between one and two weeks of regular daily high-wattage vaping depending on chosen wattage, e-liquid type, and frequency. Higher wattages (DM3 at 80–100W) and sweeter e-liquids will naturally shorten coil life, while more moderate wattages (DM4 at 32–40W) and cleaner e-liquid profiles extend it. The most reliable sign a TPP DM coil needs replacing is a change in flavour — a flat, muted, or scorched taste indicates the organic cotton is spent. Reduced vapour output or a darkened e-liquid discolouration in the tank are secondary indicators. With three coils per pack, a fresh replacement is always ready when you need it.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCoil\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDM1 0.15Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDM2 0.2Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDM3 0.15Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDM4 0.3Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG shortfills or 50\/50 freebase\u003c\/td\u003e\n\u003ctd\u003e3mg–6mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll TPP DM coils are designed for high-VG e-liquids of 70% VG or higher for optimal wicking, saturation, and cloud production at their respective wattage ranges. The full range of 100ml 70VG\/30PG shortfills at QSS Vape — including the Lancashire Creamery, Future Juice, Wild Roots, Mix Labs, and Just Juice shortfill ranges — pairs brilliantly with every TPP DM coil option and delivers outstanding results at the wattages these coils operate at.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNicotine salts and high-strength freebase e-liquids are not recommended for any TPP DM coil — the high-power DTL wattage ranges produce uncomfortably harsh throat hits with concentrated nicotine formulas. Voopoo officially recommend a maximum of 10mg nicotine strength across the full TPP DM range. You can use 50\/50 e-liquids with the DM4 at lower wattage, but high-VG remains the recommended pairing for all four coil options.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e3x TPP DM replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Technology\u003c\/td\u003e\n\u003ctd\u003ePatented TPP mesh — increased atomisation area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003eOrganic cotton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePress-fit — no tools, no threading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003eDM1 0.15Ω \/ DM2 0.2Ω \/ DM3 0.15Ω \/ DM4 0.3Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (DM1 0.15Ω)\u003c\/td\u003e\n\u003ctd\u003e60W–80W (best: 65W–75W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (DM2 0.2Ω)\u003c\/td\u003e\n\u003ctd\u003e40W–60W (best: 50W–55W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (DM3 0.15Ω)\u003c\/td\u003e\n\u003ctd\u003e80W–100W (best: 85W–95W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (DM4 0.3Ω)\u003c\/td\u003e\n\u003ctd\u003e32W–40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (DM1\/DM2\/DM3)\u003c\/td\u003e\n\u003ctd\u003eFull DTL (Direct-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (DM4)\u003c\/td\u003e\n\u003ctd\u003eHalf DTL \/ RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended E-Liquid\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills (all options)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDM4 Alternative\u003c\/td\u003e\n\u003ctd\u003e50\/50 freebase also compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Nicotine\u003c\/td\u003e\n\u003ctd\u003e≤10mg (Voopoo official recommendation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eNicotine salts above 10mg \/ 50\/50 at 20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eDrag 3, Drag X Plus, Drag 4 (with TPP tank), Argus GT 2 (with TPP tank), TPP Pod Tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eStandard PnP (VM\/TW\/TM) \/ PnP X \/ ITO coil platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e3x Voopoo TPP DM Replacement Coils (DM1, DM2, DM3, or DM4 — option of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eCompatible only with the Voopoo TPP Pod Tank and TPP-compatible devices. Not compatible with standard PnP, PnP X, or ITO coil platforms. Always verify your device's maximum wattage before selecting DM3. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Voopoo","offers":[{"title":"DM1 0.15 Ohm","offer_id":57435603206519,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true},{"title":"DM2 0.2 Ohm","offer_id":57435603239287,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true},{"title":"DM3 0.15 Ohm","offer_id":57435603272055,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/dm1.jpg?v=1788434966"},{"product_id":"vaporesso-gtx-replacement-coils","title":"Vaporesso GTX Replacement Coils","description":"\u003cp dir=\"ltr\"\u003eThe Vaporesso GTX Replacement Coils are the genuine, official replacement coils for one of the most versatile and widely used coil platforms in the Vaporesso range — covering an extensive list of Vaporesso Pod kits, AIO devices, and tanks in a single unified coil family. GTX powers everything from compact everyday Pod kits to capable sub-ohm box mod setups, with a resistance range spanning tight MTL nic salt vaping to full DTL cloud chasing — all in the same push-fit coil format.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAvailable at QSS Vape in two carefully selected options — the \u003cstrong\u003eGTX 0.8Ω Mesh Coil (12–20W)\u003c\/strong\u003e and the \u003cstrong\u003eGTX 0.2Ω Mesh Coil (45–60W)\u003c\/strong\u003e — these two coils cover the most popular ends of the GTX platform's performance range: a smooth, flavourful MTL draw for nicotine salt vapers on one end, and a warm, cloud-forward sub-ohm DTL experience on the other. Sold in a pack of five, every GTX coil uses Vaporesso's COREX Morph-Mesh technology with Cumulus cotton wicking for up to 50% better flavour production and a significantly longer coil lifespan than conventional round-wire coil designs.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCOREX Technology — What Makes the GTX Coil Different\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Vaporesso GTX coil — across both the 0.8Ω and 0.2Ω options — is built around Vaporesso's COREX heating technology, combining two key innovations that work together to deliver better flavour and longer coil life than a standard mesh coil of the same resistance meaningfully.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMorph-Mesh Structure:\u003c\/strong\u003e The COREX coil uses a graduated Morph-Mesh design — rather than a uniform flat mesh grid, the mesh density and spacing vary across the coil's heating surface to optimise heat distribution for each specific resistance level. More even heating means no hotspots, no uneven e-liquid consumption, and no localised burning of the cotton — the result is a coil that delivers consistent, accurate flavour from the very first puff right through to the end of its lifespan, and a Vaporesso claim of up to 50% better flavour production compared to conventional coil designs.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCumulus Cotton Wicking:\u003c\/strong\u003e COREX pairs the Morph-Mesh with Vaporesso's Cumulus cotton — a specially selected and processed cotton that absorbs e-liquid more efficiently than standard organic cotton, holds more e-liquid within the wicking structure at any given time, and resists the compression and degradation that ordinary cotton suffers over repeated heat cycles. The Cumulus cotton's superior saturation capacity is the key reason GTX coils last longer than many competing coil designs—it keeps the mesh consistently and evenly saturated throughout the coil's life, preventing the dry spots and uneven saturation that cause premature coil failure and burnt taste in lesser designs.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTwo Coil Options — Choosing the Right GTX Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eGTX 0.8Ω Mesh Coil\u003c\/strong\u003e — 12W–20W | MTL \/ Warm MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe MTL specialist of the two GTX options stocked at QSS Vape — and one of the most satisfying and consistently popular coils across the entire GTX platform. The 0.8Ω operates at just 12–20W and delivers a warm, flavourful mouth-to-lung draw that sits between a tight cigarette-style MTL and a slightly looser, warmer RDL-leaning experience — making it a brilliant choice for vapers who want a little more warmth and flavour density than a 1.2Ω coil provides without stepping into sub-ohm territory.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe GTX 0.8Ω features a restrictive airflow design at the base of the coil that channels airflow more tightly around the COREX mesh element — concentrating the vapour and delivering a warm, focused draw that feels genuinely satisfying with nicotine salt e-liquids at 10mg or 20mg strength. The COREX Morph-Mesh keeps flavour consistent and accurate throughout the coil's life, and the Cumulus cotton wicks 50\/50 and nic salt formulas efficiently at this resistance without flooding or gurgling.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 0.8Ω is the ideal coil for vapers running Vaporesso Pod kits and AIO devices who primarily vape 20mg nicotine salts and want a warmer, more flavour-forward draw than a tight 1.2Ω pull provides — while still retaining the compact, discreet, cigarette-style character that makes MTL vaping so satisfying. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength. All 10ml nicotine salt e-liquids at QSS Vape pair perfectly with the GTX 0.8Ω.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eGTX 0.2Ω Mesh Coil\u003c\/strong\u003e — 45W–60W | DTL \/ Sub-Ohm\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe sub-ohm powerhouse of the two GTX options — a full DTL mesh coil that operates at 45–60W and delivers warm, dense vapour, rich cloud production, and an open, unrestricted direct-to-lung draw that showcases the COREX Morph-Mesh's flavour performance at its very best. The 0.2Ω is the coil for vapers who want serious sub-ohm performance from a GTX-compatible device — whether that's a capable Vaporesso Pod mod, a full box mod with the GTX Tank, or any other GTX-compatible kit with sufficient wattage output.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe wider airflow channels of the 0.2Ω coil deliver a substantially more open, unrestricted draw than the 0.8Ω — warm, cloud-forward, and deeply satisfying from the very first inhale. The COREX Morph-Mesh at this resistance heats e-liquid across a wide, even surface area, maximising vapour production and delivering a bold, full-bodied flavour profile that high-VG shortfills are perfectly designed to complement. The Cumulus cotton handles the faster wicking demand of 45–60W vaping with impressive efficiency, maintaining consistent saturation throughout the coil's lifespan without flooding.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRequires a device capable of sustaining 45W comfortably at minimum — always check your device's maximum rated wattage before selecting the 0.2Ω. Best with high-VG e-liquids (60% VG or higher). Works brilliantly with the full range of 70VG\/30PG shortfills available at QSS Vape at 3mg freebase strength. Not recommended with 20mg nicotine salts — the vapour production at 45–60W makes high-strength nic salts uncomfortably harsh.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The GTX Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBoth the GTX 0.8Ω and 0.2Ω coils are compatible with the following Vaporesso devices — though it is critical to check individual device-specific compatibility notes below before ordering, as not every GTX device is compatible with every GTX resistance:\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePod Kits \u0026amp; AIO Devices:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVaporesso XROS Pro 2 \u003cem\u003e(0.8Ω recommended)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eVaporesso GTX One \/ GTX One Pro \u003cem\u003e(0.8Ω — not compatible with 0.2Ω)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eVaporesso GTX Go 40 \/ GTX Go 80 \u003cem\u003e(0.8Ω for Go 40 — check max wattage before 0.2Ω)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eVaporesso Target PM80 \/ PM80 SE \u003cem\u003e(both compatible — check wattage)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eVaporesso Target PM30 \u003cem\u003e(0.8Ω recommended — 0.2Ω requires 45W+ output)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eVaporesso SWAG PX80\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe X \/ Luxe X Pro\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe XR \/ Luxe XR Max\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe 80 \/ Luxe 80S\u003c\/li\u003e\n\u003cli\u003eVaporesso Gen Nano 80W\u003c\/li\u003e\n\u003cli\u003eVaporesso XIRON Pod\u003c\/li\u003e\n\u003cli\u003eVaporesso PM40 \u003cem\u003e(0.8Ω only — PM40 is not compatible with the 0.2Ω)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTanks:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVaporesso GTX Tank 18 \u003cem\u003e(0.8Ω only — GTX Tank 18 is not compatible with 0.15Ω, 0.2Ω, or 0.3Ω options)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eVaporesso GTX Tank 22\u003c\/li\u003e\n\u003cli\u003eVaporesso XTank T \u003cem\u003e(both 0.8Ω and 0.2Ω compatible — see XTank T product page for full coil guide)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant compatibility notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eThe \u003cstrong\u003eGTX 0.2Ω\u003c\/strong\u003e requires a device capable of sustaining at least 45W — lower-wattage Pod devices including the GTX One, GTX Tank 18, GTX Go 40, and PM40 are \u003cstrong\u003enot\u003c\/strong\u003e compatible with the 0.2Ω\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003eGTX 0.8Ω\u003c\/strong\u003e is compatible across the widest range of GTX devices — if you are unsure which coil your device supports, the 0.8Ω is the safer starting choice for most compact GTX Pod kits\u003c\/li\u003e\n\u003cli\u003eGTX coils use a push-fit installation system on Pod devices and a screw-fit installation on tank versions — installation method varies by device\u003c\/li\u003e\n\u003cli\u003eGTX coils are \u003cstrong\u003enot\u003c\/strong\u003e compatible with Vaporesso's GT, NRG, or EUC coil platforms — please verify your device is on the GTX platform before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your GTX Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGTX coil installation varies slightly depending on whether your device uses a Pod or tank format — but the priming process is the same for both.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePod devices:\u003c\/strong\u003e Remove the Pod from the device, locate the coil slot at the base of the Pod, and pull the old coil straight out. Prime the fresh coil by applying two to three drops of e-liquid onto the exposed Cumulus cotton wicking visible through the coil's ports. Let it soak for three to five minutes, then push the primed coil firmly into the Pod until it clicks securely into place. Fill with e-liquid and vape.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTank devices (GTX Tank \/ XTank T):\u003c\/strong\u003e Unscrew the tank base, remove the old coil by unscrewing it anticlockwise, prime the fresh coil as above, then screw the new coil into the base clockwise until it seats firmly without over-tightening. Reattach the base and fill.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIn both cases, always start at the lower end of the recommended wattage range and work up gradually over the first few draws — this beds the Cumulus cotton properly and gives it time to reach full saturation before you apply the full heat load, extending coil life significantly.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your GTX Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGTX coils are consistently praised for their longevity — the Cumulus cotton's superior saturation capacity means they typically outlast conventional cotton coils of similar resistance by a meaningful margin. Most vapers report one to two weeks from the 0.8Ω under moderate daily use, and a similar lifespan from the 0.2Ω at its higher wattage. The clearest sign a GTX coil needs replacing is a change in flavour — a flat, muted, or slightly burnt taste means the Cumulus cotton is spent. Reduced vapour production and a gurgling sound during draws are secondary indicators. With five coils in every pack, a fresh replacement is always ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCoil\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nicotine salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt or 3mg–6mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.2Ω\u003c\/td\u003e\n\u003ctd\u003e60VG\/40PG or 70VG\/30PG shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with the GTX 0.8Ω coil. The full range of 100ml 70VG\/30PG shortfills at QSS Vape pairs brilliantly with the GTX 0.2Ω for outstanding DTL performance.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHigh-VG e-liquids of 70VG or above are not recommended with the 0.8Ω — the thicker consistency does not wick efficiently at this resistance and will result in dry hits. High-strength nicotine salts at 20mg are not recommended with the 0.2Ω — the vapour production at 45–60W makes high nicotine concentrations uncomfortably harsh.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e5x GTX replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Technology\u003c\/td\u003e\n\u003ctd\u003eCOREX — Morph-Mesh structure + Cumulus cotton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePush-fit (Pod devices) \/ Screw-fit (tank devices)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.8Ω \/ 0.2Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e12W–20W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.2Ω)\u003c\/td\u003e\n\u003ctd\u003e45W–60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003eMTL \/ Warm MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.2Ω)\u003c\/td\u003e\n\u003ctd\u003eDTL \/ Sub-Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nicotine salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.2Ω)\u003c\/td\u003e\n\u003ctd\u003e60VG–70VG shortfills — 3mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlavour Improvement\u003c\/td\u003e\n\u003ctd\u003eUp to 50% vs conventional coils (COREX claim)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003eCumulus cotton — enhanced absorption and saturation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Mesh\u003c\/td\u003e\n\u003ctd\u003eMorph-Mesh — graduated density for even heating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003eXROS Pro 2, GTX One\/Pro, GTX Go 40\/80, PM80\/SE\/30\/40, SWAG PX80, Luxe X\/XR\/80, XIRON, Gen Nano 80W, GTX Tank 18\/22, XTank T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices (0.2Ω)\u003c\/td\u003e\n\u003ctd\u003ePM80\/SE, SWAG PX80, Luxe X\/XR\/80, GTX Go 80, Gen Nano 80W, XIRON, GTX Tank 22, XTank T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible (0.2Ω)\u003c\/td\u003e\n\u003ctd\u003eGTX One, GTX Tank 18, GTX Go 40, PM40 — insufficient wattage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible (platform)\u003c\/td\u003e\n\u003ctd\u003eVaporesso GT, NRG, or EUC coil platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e5x Vaporesso GTX Replacement Coils (0.8Ω or 0.2Ω — option of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003ePlease check your device's compatibility with your chosen resistance before ordering — the 0.2Ω requires a minimum of 45W device output. Not compatible with the Vaporesso GT, NRG, or EUC coil platforms. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"GTX 0.8 Ohms","offer_id":57435628044663,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"GTX 0.2 Ohms","offer_id":57435628077431,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/vaporesso-gtx-replacement-coils-0.8_1024x_4565c7af-7464-4f3c-8d21-977cccd93ee8.webp?v=1788449830"},{"product_id":"vaporesso-xros-series-corex-3-0-replacement-pods","title":"Vaporesso XROS Series COREX 3.0 Replacement Pods","description":"\u003cp dir=\"ltr\"\u003eThe Vaporesso XROS Series COREX 3.0 Replacement Pods are the latest and most technically advanced generation of refillable pods for the entire Vaporesso XROS device family — a meaningful generational upgrade over the previous COREX 2.0 flat-mesh pods that delivers noticeably better flavour, a smoother draw, and a significantly longer Pod lifespan in every resistance option. If you're running any device in the Vaporesso XROS series and it's time to restock your pods, the COREX 3.0 is the version to reach for — same magnetic fit, same top-fill convenience, same XROS platform you already know, but with Vaporesso's newest and most refined coil technology inside every single Pod.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a pack of four 2ml refillable pods and available in five resistance options — \u003cstrong\u003e0.4Ω\u003c\/strong\u003e, \u003cstrong\u003e0.6Ω\u003c\/strong\u003e, \u003cstrong\u003e0.8Ω\u003c\/strong\u003e, \u003cstrong\u003e1.0Ω\u003c\/strong\u003e, and \u003cstrong\u003e1.2Ω\u003c\/strong\u003e — the COREX 3.0 pods cover the complete range of vaping styles from a warm, more open restricted DTL draw right through to the tightest, most cigarette-like MTL pull the XROS platform can deliver. Every Pod is pre-installed with a COREX 3.0 Hive Mesh coil, wicked with Vaporesso's Cumulus cotton, sealed with the SSS leak-resistant structure, and filled via the original XROS clamshell top-fill port — making them every bit as easy to live with as earlier XROS pods while performing at a substantially higher level.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCOREX 3.0 — What's New and Why It Matters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe COREX 3.0 generation makes three meaningful technical improvements over the COREX 2.0 pods that the XROS range previously shipped with — each addressing a real-world vaping experience outcome rather than simply being a specification upgrade on paper.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHive Mesh Honeycomb Structure — 40% More Aroma Intensity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe biggest change in the COREX 3.0 Pod is the move from the flat mesh pattern of the 2.0 generation to a Hive Mesh honeycomb coil structure — aerospace-grade materials engineered with an optimised chimney design that spreads e-liquid across a wider, more evenly heated surface area than flat mesh can achieve. The honeycomb pattern heats more uniformly from the very first puff, distributing temperature evenly across the entire wicking surface without the localised hot spots that flat mesh can develop over time. Vaporesso rates the COREX 3.0 at approximately 40% more aroma intensity than the 2.0 baseline — a difference that's immediately perceptible in practice as a fuller, more vibrant flavour ceiling on fruit, dessert, and menthol e-liquids that the COREX 2.0 would reproduce at a somewhat flatter level.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCumulus Cotton — Longer Life, Fewer Dry Hits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe COREX 3.0 pods are wicked with Vaporesso's Cumulus cotton — a denser, more absorbent nano-microfibre wicking material that holds more e-liquid within the wick structure at any given time and feeds e-liquid to the Hive Mesh coil more consistently throughout the Pod's lifespan. The practical result is that the dry, papery taste that signals the end of a Pod's useful life takes noticeably longer to arrive with COREX 3.0 than with earlier XROS Pod generations — keeping the flavour accurate and the draw clean across a meaningfully extended period of use. Vaporesso rates the COREX 3.0 at up to 50% longer coil life than standard pods, with most vapers getting two to four weeks of daily use from each Pod, depending on resistance, wattage, and e-liquid type.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSSS Leak-Resistant Structure — Genuinely Mess-Free\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe COREX 3.0 pods incorporate Vaporesso's SSS (Sealed Silicone System) leak-resistant structure — a silicone sealing system that locks e-liquid securely inside the Pod at all times, including during refilling, while the device is in a pocket or bag, and during the draw itself. The SSS structure includes a sealed fill port that stays closed until you deliberately open it, a sealed pod-to-device connection point, and an internal silicone chamber that prevents e-liquid from bypassing the coil and reaching the airflow path. The result is a genuinely leak-resistant Pod that handles everyday carry without worrying about e-liquid getting on your hands, clothes, or device.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFive Resistance Options — Choosing the Right COREX 3.0 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.4Ω COREX 3.0 Hive Mesh Pod\u003c\/strong\u003e — Warm RDL \/ Loose DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most open and vapour-forward Pod in the COREX 3.0 range — a warm, restricted DTL draw that delivers the most cloud production and the most intense flavour experience the XROS platform can offer. The 0.4Ω produces a noticeably more open draw than the higher-resistance options — less restricted, warmer, and significantly more vapour-forward — making it an excellent choice for vapers who want the maximum flavour and vapour performance the XROS system can produce. Best with high-VG e-liquids of 60–70% VG for consistent wicking at this resistance level. Works with lower-strength freebase and nicotine salts at 6mg or below.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant compatibility note:\u003c\/strong\u003e The 0.4Ω COREX 3.0 Pod is \u003cstrong\u003eonly\u003c\/strong\u003e compatible with the Vaporesso XROS 4, XROS 4 Mini, XROS 5, XROS 5 Mini, XROS 6, XROS Pro, and XROS Pro 2 — it is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the XROS Mini Retro or earlier XROS devices due to power constraints.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω COREX 3.0 Hive Mesh Pod\u003c\/strong\u003e — Versatile MTL \/ Light RDL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA versatile mid-point Pod that delivers a warm, balanced draw sitting between a slightly open MTL and a light RDL — one of the most popular choices across the COREX 3.0 range for good reason. The 0.6Ω produces good flavour and a satisfying level of vapour at a comfortable wattage that suits the full XROS device family without any compatibility concerns. It's the natural go-to for vapers who want more warmth and flavour presence than tighter MTL options provide, while still maintaining the focused, mouth-filling draw character XROS devices are built around. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.8Ω COREX 3.0 Hive Mesh Pod\u003c\/strong\u003e — Balanced MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA smooth, well-balanced MTL draw at a comfortable mid-range resistance that's one of the most broadly popular options across the entire XROS platform. The 0.8Ω sits between the slightly airier 0.6Ω and the tighter 1.0Ω — delivering a warm, focused mouth-to-lung draw with clean, accurate flavour and a satisfying throat hit at 20mg nic salt strength that never tips into harshness. The Hive Mesh delivers noticeably more flavour clarity and character than the flat mesh of the COREX 2.0 at the same resistance—particularly on fruit and menthol profiles, which the honeycomb structure renders with more vibrancy and depth. An excellent all-day everyday choice for most XROS users. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.0Ω COREX 3.0 Hive Mesh Pod\u003c\/strong\u003e — Tight MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA tight, cool, cigarette-like MTL draw that's a natural step towards the tightest end of the XROS platform's performance range — more restricted than the 0.8Ω with a cooler, more focused draw that feels particularly natural and comfortable for former smokers who want something closer to a cigarette pull than a warmer MTL provides. The 1.0Ω produces the least vapour of the three standard MTL options in the COREX 3.0 range — clean, discreet, and satisfying with 20mg nicotine salts for a quiet, unobtrusive all-day vape that genuinely impresses with flavour accuracy thanks to the Hive Mesh construction. Best with 50\/50 VG\/PG and high-PG nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.2Ω COREX 3.0 Hive Mesh Pod\u003c\/strong\u003e — Extra-Tight MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe tightest, coolest, and most cigarette-like draw in the entire COREX 3.0 range — the 1.2Ω is built for vapers who want the most restricted, most authentic cigarette-style MTL experience the XROS platform can deliver. Minimal vapour production, a cool and highly focused draw, and an immediate, satisfying throat hit at 20mg nic salt strength — the 1.2Ω is the Pod for new switchers from cigarettes who want the draw that feels most familiar and natural from day one, or for experienced MTL vapers who prefer the tightest, most discreet vaping experience possible. Best with high-PG and 50\/50 nicotine salt e-liquids at 20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTop-Fill Design — Clean, Quick, and Genuinely Convenient\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery COREX 3.0 Pod retains the original XROS series clamshell top-fill design — crack the fill port open at the top of the Pod, pour in your e-liquid, and close it again. The SSS silicone seal keeps the fill port firmly closed unless you deliberately open it, preventing accidental leaks during carry. The transparent Pod body lets you monitor your e-liquid level at a glance so you can top up before the Pod runs dry — a small but genuinely useful practical feature for all-day carry. You can refill each Pod multiple times throughout its lifespan until the flavour quality indicates the coil has reached the end of its life.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eMagnetic Fit — Compatible With Every XROS Device\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe COREX 3.0 pods use the same magnetic snap-fit connection as every previous generation of XROS Pod — meaning they drop straight into any XROS device without an adapter, alignment tool, or any other consideration. The magnetic connection clicks firmly into place every time and holds securely throughout everyday use, while still releasing cleanly and easily when you need to swap pods. The COREX 3.0 pods sit alongside the older COREX 2.0 flat-mesh pods on the same magnetic platform — either generation works in any XROS device. Still, the COREX 3.0's Hive Mesh and Cumulus cotton deliver meaningfully better flavour and longer Pod life, making it the recommended choice going forward.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full XROS Family\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAll five COREX 3.0 resistance options (except the 0.4Ω — see note below) are compatible with the full Vaporesso XROS device range:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVaporesso XROS (original)\u003c\/li\u003e\n\u003cli\u003eVaporesso XROS Mini\u003c\/li\u003e\n\u003cli\u003eVaporesso XROS 2\u003c\/li\u003e\n\u003cli\u003eVaporesso XROS 3 \/ XROS 3 Mini \/ XROS 3 Nano\u003c\/li\u003e\n\u003cli\u003eVaporesso XROS Pro\u003c\/li\u003e\n\u003cli\u003eVaporesso XROS Pro 2\u003c\/li\u003e\n\u003cli\u003eVaporesso XROS 4 \/ XROS 4 Mini\u003c\/li\u003e\n\u003cli\u003eVaporesso XROS 5 \/ XROS 5 Mini\u003c\/li\u003e\n\u003cli\u003eVaporesso XROS 6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.4Ω compatibility note:\u003c\/strong\u003e The 0.4Ω COREX 3.0 Pod is \u003cstrong\u003eonly\u003c\/strong\u003e compatible with the XROS 4, XROS 4 Mini, XROS 5, XROS 5 Mini, XROS 6, XROS Pro, and XROS Pro 2 due to power output requirements. It is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the XROS Mini Retro or earlier XROS devices. All other resistances (0.6Ω, 0.8Ω, 1.0Ω, and 1.2Ω) are compatible across the full XROS device range, including all earlier models.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your COREX 3.0 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstalling a fresh COREX 3.0 Pod takes seconds. Remove the old Pod from the device by pulling it upwards away from the magnetic connection. Before fitting the fresh Pod, prime it by opening the top fill port and filling the Pod to the maximum line with your chosen e-liquid. Allow five to ten minutes for the Cumulus cotton to saturate before vaping fully. This priming step is especially important with the denser Cumulus wicking material in the COREX 3.0 generation, which holds more e-liquid but takes slightly longer to saturate than older, thinner wicking materials fully. Once primed, snap the filled Pod into the magnetic connection on your XROS device until it clicks firmly into place, and vape. Never vape on an under-saturated COREX 3.0 Pod — the Cumulus cotton is exceptionally resistant to dry hits when properly saturated. However, an under-primed Pod can still experience the dry, papery taste that indicates insufficient e-liquid at the coil surface.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your COREX 3.0 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe COREX 3.0's Cumulus cotton and Hive Mesh construction are rated for up to 50% longer lifespan than standard XROS pods — with most vapers getting two to four weeks of daily refilling from each Pod depending on resistance, wattage, e-liquid type, and vaping frequency. The clearest sign a COREX 3.0 Pod needs replacing is a change in flavour — a flat, muted, or slightly dry taste means the Cumulus cotton is approaching the end of its life. A discolouration of the e-liquid visible through the transparent Pod body is a secondary indicator. With four pods per pack, you always have fresh ones ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePod\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4Ω\u003c\/td\u003e\n\u003ctd\u003e60–70VG\/30–40PG\u003c\/td\u003e\n\u003ctd\u003e3mg–6mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.0Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 or high-PG nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.2Ω\u003c\/td\u003e\n\u003ctd\u003eHigh-PG or 50\/50 nic salts\u003c\/td\u003e\n\u003ctd\u003e20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with the 0.6Ω, 0.8Ω, 1.0Ω, and 1.2Ω COREX 3.0 pods for a clean, accurate, and deeply satisfying MTL vaping experience.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e4x 2ml refillable pods per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Technology\u003c\/td\u003e\n\u003ctd\u003eCOREX 3.0 — Hive Mesh honeycomb structure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Generation\u003c\/td\u003e\n\u003ctd\u003e3rd generation (upgrade over COREX 2.0 flat-mesh)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003eCumulus cotton — nano-microfibre, high absorbency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Installation\u003c\/td\u003e\n\u003ctd\u003ePre-installed — resistance locked at point of order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeak Protection\u003c\/td\u003e\n\u003ctd\u003eSSS (Sealed Silicone System)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Capacity\u003c\/td\u003e\n\u003ctd\u003e2ml (UK TPD compliant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Body\u003c\/td\u003e\n\u003ctd\u003eTransparent — e-liquid level visible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFill System\u003c\/td\u003e\n\u003ctd\u003eClamshell top-fill port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Connection\u003c\/td\u003e\n\u003ctd\u003eMagnetic snap-fit (compatible with all XROS devices)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.4Ω \/ 0.6Ω \/ 0.8Ω \/ 1.0Ω \/ 1.2Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003eWarm RDL \/ Loose DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003eVersatile MTL \/ Light RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003eBalanced MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (1.0Ω)\u003c\/td\u003e\n\u003ctd\u003eTight MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (1.2Ω)\u003c\/td\u003e\n\u003ctd\u003eExtra-tight MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlavour Improvement\u003c\/td\u003e\n\u003ctd\u003e~40% more aroma vs COREX 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLifespan Improvement\u003c\/td\u003e\n\u003ctd\u003eUp to 50% longer than standard pods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eFull XROS range — XROS, XROS 2, 3, 4, 5, 6, Mini variants, Pro, Pro 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4Ω Restriction\u003c\/td\u003e\n\u003ctd\u003eXROS 4\/5\/6, Pro\/Pro 2 only — not XROS Mini Retro or early XROS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD \/ TRPR compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e4x Vaporesso XROS COREX 3.0 2ml Refillable Pods (resistance of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eResistance is pre-installed and cannot be changed. Please select the correct resistance for your preferred vaping style before ordering. 0.4Ω option is not compatible with XROS Mini Retro or early XROS devices — check compatibility before ordering. Devices and e-liquid are sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"0.6 Ohm","offer_id":57436244541815,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm","offer_id":57436244574583,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 Ohm","offer_id":57436244607351,"sku":null,"price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/Vaporesso-XROS-Corex-3.0-Pods-0.6-ohm.webp?v=1788445594"},{"product_id":"vaporesso-vibe-dual-mesh-smart-pods","title":"Vaporesso Vibe Dual Mesh Smart Pods","description":"\u003cp dir=\"ltr\"\u003eThe Vaporesso Vibe Dual Mesh Smart Pods are the official replacement pods for the Vaporesso Vibe, Vibe SE, Vibe SE 2, Vibe Nano, and Vibe Nano Pro Pod kits — and they bring something genuinely clever to the refillable Pod market. Every Pod in the pack contains not one but two mesh coil elements—two distinct resistances built into the same 2ml Pod body —each firing on demand depending on which mode your Vibe device is set to. One Pod, one fill of e-liquid, two completely different vaping experiences available at the touch of a button. It's a smart, genuinely useful innovation that makes the Vibe platform one of the most versatile Pod kits available in the UK right now.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a convenient pack of three 2ml refillable pods and available in two dual-resistance configurations — \u003cstrong\u003e0.6Ω\/0.8Ω (24W Power \/ 14W ECO)\u003c\/strong\u003e and \u003cstrong\u003e0.7Ω\/1.0Ω (20W Power \/ 12W ECO)\u003c\/strong\u003e — the Vibe Dual Mesh Smart Pods cover a wide range of MTL and RDTL vaping styles without ever requiring you to swap the Pod. Fill once and let your device do the rest.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDual Mesh Smart Technology — How It Works\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe defining feature of the Vaporesso Vibe Dual Mesh Smart Pods is their unique dual-coil architecture — and understanding how it works explains exactly why the Vibe platform has earned such a strong following among Pod kit vapers.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInside every Pod, two separate mesh coil elements are installed at the point of manufacture — a lower-resistance coil for Power Mode and a higher-resistance coil for ECO Mode. The Vibe device automatically detects the Pod's resistance and selects the right coil based on the mode you choose. In ECO Mode, the device fires the higher-resistance coil at lower wattage — producing a cooler, tighter, more restricted MTL draw with less vapour and better battery economy. In Power Mode, it fires the lower-resistance coil at higher wattage — producing a warmer, more vapour-forward RDTL draw with more intensity and flavour density.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe transition between the two modes happens instantly — no Pod swap, no refill, no waiting. Just switch modes on the device, and the experience changes immediately. It's a genuinely practical system for vapers whose preferences shift throughout the day — reaching for a tighter, cooler draw in public or at work, then switching to a warmer, more satisfying hit at home without ever needing to reach for a different Pod or device.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTwo Pod Configurations — Choosing the Right Pairing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω \/ 0.8Ω Dual Mesh Smart Pod\u003c\/strong\u003e — Power Mode: 24W | ECO Mode: 14W\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe warmer, more vapour-forward of the two configurations — the 0.6Ω\/0.8Ω Pod delivers a noticeably bolder, more intense experience across both modes compared to the 0.7Ω\/1.0Ω option. In Power Mode at 24W, the 0.6Ω coil fires to produce a warm, flavour-rich RDTL draw with satisfying vapour density that feels genuinely rewarding — particularly with fruity or dessert nic salt e-liquids where the extra warmth draws out real character. In ECO Mode at 14W, the 0.8Ω coil delivers a warmer-than-average MTL draw that sits between a standard MTL and a light RDTL experience — cool enough to be comfortable but warm enough to deliver real flavour presence. A brilliant choice for vapers who want more from their Pod kit without stepping into a full sub-ohm setup. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.7Ω \/ 1.0Ω Dual Mesh Smart Pod\u003c\/strong\u003e — Power Mode: 20W | ECO Mode: 12W\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe tighter, cooler, and more MTL-focused of the two configurations — the 0.7Ω\/1.0Ω Pod delivers a more restrained, cigarette-style experience across both modes that's a natural choice for vapers making the switch from cigarettes or those who prefer a more discreet, conventional MTL draw. In ECO Mode at 12W, the 1.0Ω coil fires a cool, tight MTL draw with minimal vapour output and a clean, satisfying throat hit at 20mg nic salt strength that closely mirrors a cigarette pull. In Power Mode at 20W, the 0.7Ω coil delivers a warmer, slightly more open draw with marginally more vapour — still firmly MTL in character but with just a touch more warmth and flavour density for when you want a more satisfying hit. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSide-Fill Design — Clean, Quick, and Refill Without Removing the Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Vaporesso Vibe Dual Mesh Smart Pod refills through a side-fill port with a soft silicone tab—a clean, practical design that lets you refill the Pod without removing it from the device. Locate the silicone tab on the side of the Pod, open it, and fill to the maximum line using any standard 10ml nicotine salt bottle or dropper. Push the silicone tab firmly back into place, and you're ready to vape. The silicone tab creates a tight, secure seal that prevents e-liquid from leaking back out through the fill port during vaping or while the device is in your pocket. No funnels, no mess, and no need to disconnect the Pod from the device during refills—making it one of the most convenient side-fill designs available on any Pod kit in the UK.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTransparent Pod Body — Always Know Your E-Liquid Level\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEach Vibe Dual Mesh Smart Pod features a transparent Pod body that lets you check your remaining e-liquid level at a glance, anytime, without removing the Pod from the device. When the visible e-liquid level drops low, it's time to top up — a simple but genuinely useful feature that means you never accidentally vape a near-dry Pod and risk a dry hit on the coil. Keeping the Pod well topped up throughout the day is the best way to extend the lifespan of the dual mesh coils and maintain clean, consistent flavour right through to the end of each Pod.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full Vibe Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVaporesso Vibe Dual Mesh Smart Pods are compatible with the following Vaporesso devices:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVaporesso Vibe\u003c\/li\u003e\n\u003cli\u003eVaporesso Vibe SE\u003c\/li\u003e\n\u003cli\u003eVaporesso Vibe SE 2\u003c\/li\u003e\n\u003cli\u003eVaporesso Vibe Nano\u003c\/li\u003e\n\u003cli\u003eVaporesso Vibe Nano Pro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Vaporesso Vibe Dual Mesh Smart Pods are designed exclusively for the Vibe Pod kit family. They are not compatible with any other Vaporesso device — including the XROS series, Luxe series, or any other Vaporesso Pod platform. Please check that your device is a Vibe-series kit before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Use Your Vibe Smart Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFitting a fresh Vibe Dual Mesh Smart Pod is a simple, tool-free process. Remove the old Pod from the device by pulling it upwards away from the magnetic connection. Fill the fresh Pod through the side-fill port before inserting it into the device — open the silicone tab, fill to the maximum line, and close the tab firmly. Allow three to five minutes for the dual mesh coils to fully saturate with e-liquid before vaping — this priming step is important for both coils and ensures clean, accurate flavour from the very first draw in either mode. Push the filled Pod into the device's magnetic connection until it clicks securely into place.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOnce installed, the device will automatically detect the Pod's resistance pairing and display the available mode settings. Use the device controls to select ECO or Power Mode and switch between the two coils—the device handles everything else automatically. Never vape on a significantly depleted Pod—keeping the e-liquid topped up maintains consistent coil saturation in both coil elements and is key to getting the maximum lifespan from every Pod.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Vibe Smart Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVaporesso Vibe Dual Mesh Smart Pods typically last between one and two weeks of regular daily vaping, depending on which mode you use most, the e-liquid type, and overall vaping frequency. Sweeter e-liquids and heavier use of Power Mode at 24W will naturally shorten Pod life, while lighter use in ECO Mode and cleaner e-liquid profiles will extend it. The clearest sign a Pod needs replacing is a change in flavour across both modes — a flat, muted, or slightly burnt taste in either ECO or Power Mode indicates one or both of the dual mesh coils have reached the end of their life. With three pods in every pack, a fresh replacement is always ready when you need it.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBoth Pod configurations — 0.6Ω\/0.8Ω and 0.7Ω\/1.0Ω — are designed for use with 50\/50 VG\/PG freebase e-liquids and nicotine salt e-liquids at 10mg or 20mg strength. All 10ml nicotine salt e-liquids at QSS Vape pair perfectly with both Vibe Pod configurations — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — delivering clean, accurate, and consistently satisfying MTL and RDTL performance across both ECO and Power modes.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHigh-VG e-liquids of 60VG or above are not recommended for Vibe Dual Mesh Smart Pods — the thicker consistency does not wick efficiently through the dual mesh coil setup at Vibe wattages and will cause dry hits and premature Pod failure. 50\/50 remains the optimum e-liquid choice across both Pod configurations and both modes.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e3x 2ml refillable Dual Mesh Smart Pods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Capacity\u003c\/td\u003e\n\u003ctd\u003e2ml (UK TPD compliant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Design\u003c\/td\u003e\n\u003ctd\u003eDual Mesh Smart — two coil elements per Pod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Configuration Option 1\u003c\/td\u003e\n\u003ctd\u003e0.6Ω (Power Mode — 24W) \/ 0.8Ω (ECO Mode — 14W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Configuration Option 2\u003c\/td\u003e\n\u003ctd\u003e0.7Ω (Power Mode — 20W) \/ 1.0Ω (ECO Mode — 12W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMode Switching\u003c\/td\u003e\n\u003ctd\u003eAutomatic — device selects coil based on selected mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (Power Mode)\u003c\/td\u003e\n\u003ctd\u003eRDTL \/ Warm MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (ECO Mode)\u003c\/td\u003e\n\u003ctd\u003eMTL \/ Tight MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFill System\u003c\/td\u003e\n\u003ctd\u003eSide-fill with soft silicone tab\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Body\u003c\/td\u003e\n\u003ctd\u003eTransparent — e-liquid level visible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Connection\u003c\/td\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nicotine salts — 10mg or 20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eHigh-VG e-liquids of 60VG or above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eVibe, Vibe SE, Vibe SE 2, Vibe Nano, Vibe Nano Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eXROS series \/ Luxe series \/ any other Vaporesso platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD \/ TRPR compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e3x Vaporesso Vibe Dual Mesh Smart 2ml Refillable Pods (0.6Ω\/0.8Ω or 0.7Ω\/1.0Ω — option of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eCompatible with Vaporesso Vibe, Vibe SE, Vibe SE 2, Vibe Nano, and Vibe Nano Pro only. Not compatible with any other Vaporesso device. Devices and e-liquid are sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"V2 06 Ohm + 0.8 Ohm (4.5ml)","offer_id":57436377579895,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/vibepod.webp?v=1788447288"},{"product_id":"vaporesso-luxe-x-corex-2-0-replacement-pods","title":"Vaporesso Luxe X COREX 2.0 Replacement Pods","description":"\u003cp dir=\"ltr\"\u003eThe Vaporesso Luxe X COREX 2.0 Replacement Pods are the official, upgraded replacement pods for the entire Vaporesso Luxe series—a meaningful step up from the original Luxe X pods, delivering noticeably improved flavour, better coil longevity, and a smarter design across all four resistance options. Built around Vaporesso's second-generation COREX heating technology with an upgraded Morph-Mesh coil structure and improved COREX cotton wicking, these pods deliver an explosive flavour improvement over the original Luxe X Pod platform while maintaining the same simple, hassle-free experience that makes the Luxe series so popular.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a pack of two 2ml refillable pods and available in four resistance options — \u003cstrong\u003e0.3Ω\u003c\/strong\u003e, \u003cstrong\u003e0.4Ω\u003c\/strong\u003e, \u003cstrong\u003e0.6Ω\u003c\/strong\u003e, and \u003cstrong\u003e0.8Ω\u003c\/strong\u003e — the COREX 2.0 pods cover the full range of vaping styles from open, cloud-forward DTL performance right through to a tight, cigarette-style MTL draw. The 0.3Ω and 0.4Ω options feature a wider mouthpiece specifically designed for free-flowing DTL inhales. At the same time, the 0.6Ω and 0.8Ω pods have been redesigned with a slimmer, narrower mouthpiece tailored to the shape of the mouth for a more natural and comfortable MTL and RDTL experience. A thoughtful design distinction that makes the Pod you receive perfectly matched to the way you actually vape.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCOREX 2.0 Technology — What's Improved and Why It Matters\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe COREX 2.0 upgrade over the original Luxe X pods delivers meaningful improvements in two core areas — flavour accuracy and Pod longevity — rather than simply being a branding refresh.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eUpgraded Morph-Mesh Structure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe COREX 2.0 pods use an advanced Morph-Mesh coil structure — a graduated mesh design where the mesh density varies across the heating surface rather than remaining uniform throughout. This graduated structure optimises the heat distribution profile for each resistance level, ensuring the coil heats more evenly at its specific operating wattage and produces a cleaner, more consistent flavour profile from the very first puff. The result is noticeably improved flavour accuracy and richer, more vibrant taste across all four resistance options — particularly evident on fruit and menthol e-liquid profiles where the Morph-Mesh's precision renders flavour nuances that a flat, uniform mesh would partially miss.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImproved COREX Cotton Wicking\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe original Luxe X pods used standard organic cotton wicking. The COREX 2.0 generation upgrades this to Vaporesso's improved COREX cotton — a more efficiently structured wicking material that absorbs e-liquid faster, holds more e-liquid in contact with the Morph-Mesh coil at any given time, and maintains consistent saturation throughout the Pod's lifespan more effectively than the original cotton. The practical result is fewer dry hits as the Pod depletes, longer consistent flavour before the Pod needs replacing, and a meaningfully extended Pod lifespan compared to the original Luxe X Pod generation. Vaporesso rates the COREX 2.0 at up to 50% better vapourisation efficiency than the original COREX pods.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSSS Leak-Resistant Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery COREX 2.0 Pod incorporates Vaporesso's SSS (Sealed Silicone System) leak-resistant design — a triple-seal structure that locks e-liquid in at three critical points: the side-fill port, the coil base, and the mouthpiece connection. The SSS system keeps e-liquid securely contained whether the Pod is in your pocket, in your bag, or during refilling — eliminating the leaking and gurgling that can affect less well-engineered Pod designs at similar resistance levels.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFour Resistance Options — Choosing the Right Luxe X COREX 2.0 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.3Ω COREX 2.0 Pod\u003c\/strong\u003e — 32W–40W | DTL | Wide Mouthpiece\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most powerful and cloud-forward Pod in the Luxe X COREX 2.0 range — a full DTL mesh Pod designed for vapers who want the most open, vapour-dense, and flavour-intense experience the Luxe X platform can deliver. At 32–40W, the 0.3Ω produces a wide, unrestricted direct-to-lung draw with warm, dense vapour and bold, full-bodied flavour that rewards high-VG shortfill e-liquids at 3mg strength. The wider mouthpiece design on the 0.3Ω Pod is specifically built for DTL vaping — more open, more comfortable for direct lung inhales, and proportionally wider than the MTL-optimised 0.6Ω and 0.8Ω options. Requires a Luxe X series device capable of sustaining 32W or above. Best with 70VG\/30PG or higher shortfill e-liquids at 3mg freebase strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.4Ω COREX 2.0 Pod\u003c\/strong\u003e — 26W–32W | RDL \/ Loose DTL | Wide Mouthpiece\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA slightly more accessible DTL and RDL option — the 0.4Ω delivers a warm, satisfying restricted DTL draw at a more moderate 26–32W that suits a wider range of Luxe X series devices comfortably. The draw is noticeably more open than the 0.6Ω or 0.8Ω options while remaining more controlled and flavour-focused than the fully open 0.3Ω — making it an excellent versatile all-day option for vapers who want strong RDL performance without the highest wattage output. The wider mouthpiece design is shared with the 0.3Ω for comfortable DTL and RDL inhales. Works well with both high-VG shortfills and 50\/50 freebase e-liquids at lower nicotine strengths. Best with 60VG\/40PG or 70VG\/30PG e-liquids at 3mg–6mg freebase.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω COREX 2.0 Pod\u003c\/strong\u003e — 20W–30W | RDTL \/ Light RDL | Narrow Mouthpiece\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe versatile mid-point of the COREX 2.0 range — a balanced RDTL draw that sits right on the boundary between a warm MTL and a light, satisfying RDL experience. The 0.6Ω's newly redesigned narrow mouthpiece makes it immediately more comfortable for mouth-filling MTL and RDTL draws — the slimmer profile fits more naturally against the lips and produces a more focused, concentrated draw than the wider DTL mouthpiece of the 0.3Ω and 0.4Ω options. An excellent all-day choice for vapers who want more warmth and flavour than a tight 0.8Ω MTL delivers while still maintaining that focused, mouth-filling character the Luxe platform is built around. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.8Ω COREX 2.0 Pod\u003c\/strong\u003e — 12W–20W | MTL | Narrow Mouthpiece\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe MTL specialist of the Luxe X COREX 2.0 range — a smooth, flavourful mouth-to-lung Pod that operates at a comfortable 12–20W and delivers the tightest, most cigarette-like draw the Luxe X platform can produce. The 0.8Ω's narrow, slimline mouthpiece is perfectly shaped for comfortable MTL vaping — delivering a cool, focused draw with a satisfying throat hit at 20mg nic salt strength that feels completely natural and familiar to former smokers. The COREX 2.0's Morph-Mesh delivers noticeably more flavour clarity at this resistance than the original Luxe X pods — the step up in taste accuracy is immediately perceptible, particularly on fruit and menthol nicotine salt profiles. The go-to Pod for Luxe X vapers who primarily use 20mg nicotine salts and want a clean, satisfying, all-day MTL experience. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSide-Fill Design — Clean, Quick, and Mess-Free\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Luxe X COREX 2.0 Pod refills through a secure side-fill silicone port — pull the silicone plug gently from the side of the Pod, fill to the maximum line, and push the plug firmly back into place. The SSS system keeps the fill port sealed tightly during vaping and between refills, preventing e-liquid from working its way back through the port during everyday carry. No top cap to remove, no threading to navigate—just a clean, one-step refill that takes seconds and can be done with the Pod still in the device, if preferred. The transparent Pod body lets you monitor your remaining e-liquid level at a glance, anytime.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full Luxe X Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVaporesso Luxe X COREX 2.0 pods are compatible with the following Vaporesso devices:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVaporesso Luxe X\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe X2\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe X3\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe X Pro\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe XR\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe XR Max\u003c\/li\u003e\n\u003cli\u003eVaporesso Luxe XR Max 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant wattage compatibility notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eThe \u003cstrong\u003e0.3Ω\u003c\/strong\u003e Pod requires a device capable of sustaining 32W or above — check your Luxe series device's maximum wattage before selecting this option\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003e0.4Ω\u003c\/strong\u003e Pod requires a device capable of reaching 26W or above\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003e0.6Ω\u003c\/strong\u003e and \u003cstrong\u003e0.8Ω\u003c\/strong\u003e pods are compatible across the full Luxe X series range without wattage concerns — ideal starting points if you're unsure which Pod your device supports\u003c\/li\u003e\n\u003cli\u003eLuxe X COREX 2.0 pods are \u003cstrong\u003enot\u003c\/strong\u003e compatible with the Vaporesso XROS series, Vibe series, or any other Vaporesso platform — these pods are exclusive to the Luxe X family\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your Luxe X COREX 2.0 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eInstalling a fresh Luxe X COREX 2.0 Pod is a clean, straightforward process. Remove the old Pod from the Luxe device by pulling it upwards from the magnetic connection. Before inserting the fresh Pod, fill it through the side-fill port by gently removing the silicone plug, filling to the maximum line with your chosen e-liquid, and firmly replacing the plug. Let the COREX cotton fully saturate for five minutes before inserting the Pod into the device and vaping. Push the filled Pod into the device's magnetic connection until it clicks securely into place — the magnetic connection is firm and reliable, releasing cleanly when you need to swap pods.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNever vape immediately on an unfilled or insufficiently saturated Pod — the COREX 2.0 cotton performs exceptionally well when fully saturated but requires adequate priming time before the first draw to avoid a dry hit that can permanently compromise the coil before it reaches its full performance potential.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Luxe X COREX 2.0 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Luxe X COREX 2.0 pods are built for multiple refills throughout each Pod's lifespan—each Pod can typically be refilled five to eight times before flavour quality begins to decline. Most vapers get between one and two weeks of daily vaping from each Pod, depending on resistance, wattage, e-liquid type, and vaping frequency. Lower-resistance pods at higher wattages (0.3Ω, 0.4Ω) will naturally have a shorter lifespan than the higher-resistance 0.8Ω option at 12–20W. The clearest sign a Luxe X COREX 2.0 Pod needs replacing is a change in flavour—a flat, muted, or slightly scorched taste indicates the COREX cotton and Morph-Mesh are nearing the end of their life. A darkening of the e-liquid visible through the transparent Pod body is a secondary indicator. With two pods per pack, a fresh replacement is always ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePod\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.3Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4Ω\u003c\/td\u003e\n\u003ctd\u003e60VG–70VG shortfills or 50\/50\u003c\/td\u003e\n\u003ctd\u003e3mg–6mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or nicotine salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or nicotine salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with the 0.6Ω and 0.8Ω COREX 2.0 pods. The full range of 100ml 70VG\/30PG shortfills at QSS Vape pairs brilliantly with the 0.3Ω and 0.4Ω options for strong RDL and DTL performance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e2x 2ml refillable pods per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Capacity\u003c\/td\u003e\n\u003ctd\u003e2ml (UK TPD compliant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Technology\u003c\/td\u003e\n\u003ctd\u003eCOREX 2.0 — Morph-Mesh structure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003eUpgraded COREX cotton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Type\u003c\/td\u003e\n\u003ctd\u003ePre-installed integrated mesh coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeak Protection\u003c\/td\u003e\n\u003ctd\u003eSSS (Sealed Silicone System) — triple seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFill System\u003c\/td\u003e\n\u003ctd\u003eSide-fill with secure silicone plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Body\u003c\/td\u003e\n\u003ctd\u003eTransparent — e-liquid level visible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Connection\u003c\/td\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.3Ω \/ 0.4Ω \/ 0.6Ω \/ 0.8Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMouthpiece (0.3Ω \u0026amp; 0.4Ω)\u003c\/td\u003e\n\u003ctd\u003eWide — optimised for DTL\/RDL inhales\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMouthpiece (0.6Ω \u0026amp; 0.8Ω)\u003c\/td\u003e\n\u003ctd\u003eNarrow — redesigned for MTL\/RDTL inhales\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.3Ω)\u003c\/td\u003e\n\u003ctd\u003e32W–40W — DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003e26W–32W — RDL \/ Loose DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e20W–30W — RDTL \/ Light RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e12W–20W — MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.3Ω)\u003c\/td\u003e\n\u003ctd\u003eDTL (Direct-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003eRDL \/ Loose DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003eRDTL \/ Light RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003eMTL (Mouth-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.3Ω\/0.4Ω)\u003c\/td\u003e\n\u003ctd\u003e60VG–70VG+ shortfills — 3mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.6Ω\/0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nicotine salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eLuxe X, Luxe X2, Luxe X3, Luxe X Pro, Luxe XR, Luxe XR Max, Luxe XR Max 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eXROS series \/ Vibe series \/ any other Vaporesso platform\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaporisation Efficiency\u003c\/td\u003e\n\u003ctd\u003eUp to 50% improvement over original COREX pods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD \/ TRPR compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e2x Vaporesso Luxe X COREX 2.0 2ml Refillable Pods (resistance of choice — 0.3Ω, 0.4Ω, 0.6Ω, or 0.8Ω)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eCompatible with the Vaporesso Luxe X, Luxe X2, Luxe X3, Luxe X Pro, Luxe XR, Luxe XR Max, and Luxe XR Max 2 only. Not compatible with the XROS series, Vibe series, or any other Vaporesso platform. Please check your device's maximum wattage before selecting the 0.3Ω or 0.4Ω options. Devices and e-liquid are sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Vaporesso","offers":[{"title":"0.4 Ohm (5ml)","offer_id":57436420473207,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm (5ml)","offer_id":57436420505975,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/vaporesso-luxe-x-corex-20-replacement-pods-2-packprime-vapes-uk-6246528.webp?v=1788450801"},{"product_id":"oxva-xlim-v3-top-fill-replacement-pods","title":"OXVA Xlim V3 Top Fill Replacement Pods","description":"\u003cp dir=\"ltr\"\u003eThe OXVA Xlim V3 Top Fill Replacement Pods are the official, latest-generation replacement pods for the entire OXVA Xlim device family — and they represent the most refined and capable iteration of the Xlim Pod platform to date. Built around OXVA's UniTech 2.0 mesh coil technology, featuring a genuinely convenient top-fill silicone port that lets you refill without ever removing the Pod from the device, and compatible with the full Xlim kit range without any adapters or modifications, the V3 pods are the natural, obvious choice for every Xlim user looking to keep their device performing at its absolute best.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAvailable at QSS Vape in two of the most popular resistance options — \u003cstrong\u003e0.6Ω\u003c\/strong\u003e for a warm, versatile RDTL draw and \u003cstrong\u003e0.8Ω\u003c\/strong\u003e for a smooth, satisfying MTL experience — sold in a convenient pack of three 2ml refillable pods per pack. Every Pod comes pre-installed with a UniTech 2.0 mesh coil that delivers 50% better flavour and 30% longer coil life than the V2 generation, a leak-resistant anti-drip construction, and a transparent PCTG body that lets you monitor your e-liquid level at a glance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eUniTech 2.0 Mesh Coil — The Key Upgrade Over V2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe single most important improvement in the Xlim V3 Pod over the previous V2 generation is the upgrade to OXVA's UniTech 2.0 mesh coil technology — and the performance difference is immediately and clearly noticeable in everyday use.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe UniTech 2.0 coil uses an advanced mesh structure that distributes heat significantly more evenly across the e-liquid wicking surface than the V2 coil could achieve — eliminating the localised hot spots that can cause uneven saturation and flavour inconsistency in lesser coil designs. The result is a 50% improvement in flavour production over the V2 baseline and a 30% extension in coil lifespan — both meaningful, real-world improvements that translate directly into a better-tasting vape that lasts longer before the Pod needs replacing.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe UniTech 2.0 coil is pre-installed in every V3 Pod at the point of manufacture — sealed cleanly inside the PCTG Pod body with no separate coil components to handle, no threading to risk cross-threading, and no replacement parts to source. When the flavour eventually fades, you replace the entire Pod — every new Pod in the pack includes a fresh UniTech 2.0 coil.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTwo Resistance Options — Choosing the Right Xlim V3 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω UniTech 2.0 Mesh Pod\u003c\/strong\u003e — 14W–25W | RDTL \/ Light RDL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 0.6Ω is the more versatile and vapour-forward of the two options stocked at QSS Vape. This warm, slightly open draw sits at the boundary between loose MTL and light RDTL, making it one of the most popular pods across the Xlim range. At 14–25W, the 0.6Ω produces noticeably more warmth and vapour than the 0.8Ω — a fuller, more flavour-intense draw that extracts more character from your chosen e-liquid on every single puff. The UniTech 2.0 mesh at 0.6Ω delivers a genuinely impressive flavour profile — particularly on fruit and menthol nicotine salt e-liquids where the even heat distribution renders every nuance of the flavour with clarity and accuracy.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 0.6Ω is the Pod to choose if you want a warmer, more rewarding draw than a tight MTL pull provides, or if you've been vaping the 0.8Ω and want to step up to something with more presence and intensity without moving to a full sub-ohm tank setup. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg strength — Ecigone and OXVA specifically advise against 20mg nicotine salts in the 0.6Ω at higher wattages due to the increased vapour production. If you vape 20mg nic salts, stick to the lower end of the 0.6Ω wattage range or consider the 0.8Ω instead.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.8Ω UniTech 2.0 Mesh Pod\u003c\/strong\u003e — 12W–16W | MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe tighter, cooler, and more MTL-focused of the two options — the 0.8Ω delivers a smooth, focused mouth-to-lung draw at a comfortable 12–16W that's a natural, immediately familiar choice for former smokers making the switch or for vapers who prefer the most cigarette-like experience the Xlim platform can offer. The draw is noticeably more restricted than the 0.6Ω — cooler, more focused, and producing less vapour — with a clean, accurate flavour profile and a satisfying throat hit at 20mg nicotine salt strength that hits quickly and smoothly without any harshness.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe UniTech 2.0 mesh at 0.8Ω delivers the same 50% flavour improvement over the V2 generation in MTL territory — so vapers who've been running the previous Xlim Pod generation will immediately notice the step up in flavour clarity and accuracy from the first puff. A critical note from OXVA and leading Xlim retailers: \u003cstrong\u003enever run the 0.8Ω above 20W\u003c\/strong\u003e — anything above that wattage at 0.8Ω burns the coil out quickly. Keep the wattage between 12W and 16W for the best flavour and the longest possible Pod lifespan. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength. High-VG e-liquids of 70VG or above are not suitable for the 0.8Ω Pod — the thicker consistency does not wick efficiently at this resistance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTop Fill Without Removing the Pod — Genuinely Convenient\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Xlim V3 Pod's top-fill design is one of the most practical refilling experiences available from any Pod kit in the UK. The silicone fill port sits at the top of the Pod — push the silicone plug aside with your fingertip to expose the fill port, insert the nozzle of your 10ml nicotine salt bottle or dropper, fill to the maximum line, and push the plug firmly back into place. The whole process takes five seconds and can be done without removing the Pod from the device. The silicone plug creates a secure, tight seal when you close it — no e-liquid finds its way back through the fill port during vaping or everyday carry—clean, fast, and genuinely effortless every time.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eAnti-Leak Construction — Pocket-Safe and Mess-Free\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Xlim V3 Pod features OXVA's integrated anti-leak construction — a combination of the sealed silicone top-fill port, the tightly sealed coil base, and the PCTG Pod body's precision manufacturing that minimises condensation and prevents e-liquid spillage during everyday carry. The magnetic Pod connection to the Xlim device creates a secure, firm fit that holds the Pod confidently in place during use while still releasing cleanly and easily when you pull the Pod from the device. Whether the device is in your pocket on its side or rattling around in a bag, the anti-leak construction keeps e-liquid exactly where it should be.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTransparent Pod Body — Always Know Your E-Liquid Level\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe clear PCTG Pod body gives you a visible e-liquid level indicator at all times — glance at the Pod on your device to see exactly how much e-liquid remains without removing anything. When the level drops low, top up through the silicone fill port. Keeping the Pod topped up and never vaping on a near-empty Pod is the most important thing you can do to extend the lifespan of the UniTech 2.0 coil and maintain clean, consistent flavour from the first fill to the last.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full Xlim Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOXVA Xlim V3 Top Fill pods are compatible with the following OXVA devices:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eOXVA Xlim (original)\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SE\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SE 2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim V2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim Pro\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim Pro 2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim Pro 3\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SQ Pro\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SQ Pro 2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim GO\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim 3 Ultra\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e OXVA Xlim V3 pods are \u003cstrong\u003enot\u003c\/strong\u003e compatible with the following OXVA devices — these use a completely different Pod platform:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eOXVA Xlim C — uses its own specific Pod format\u003c\/li\u003e\n\u003cli\u003eOXVA NeXlim — uses dedicated NeXlim pods only\u003c\/li\u003e\n\u003cli\u003eOXVA VPrime — uses dedicated VPrime pods only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eIf you own any of the above devices, check the product page for the correct replacement pods at QSS Vape before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your Xlim V3 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFitting a fresh Xlim V3 Pod takes seconds. Remove the old Pod from the device by pulling it cleanly downwards from the magnetic connection. Before inserting the fresh Pod, fill it through the top-fill port — push the silicone plug aside, fill to the maximum line with your chosen e-liquid, and push the plug firmly back into place. Allow at least five minutes for the UniTech 2.0 mesh coil to fully saturate before inserting the Pod into the device — this priming step is critical to ensure clean flavour and prevent a dry hit on the first draw. Push the filled Pod into the device's magnetic connection until it clicks firmly into place, then start vaping at the lower end of the recommended wattage range.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNever skip the priming time — the UniTech 2.0 mesh delivers exceptional flavour when properly saturated. Still, an under-primed coil on the first draw can permanently compromise the Pod's flavour before it can perform at its full potential.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Xlim V3 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe UniTech 2.0 coil lasts 30% longer than the V2 generation, so most Xlim V3 Pod users get between five and eight refills from each Pod before the flavour starts to decline — roughly one to two weeks of daily vaping, depending on usage frequency and e-liquid choice. Sweeter e-liquids shorten Pod life; cleaner profiles extend it. The clearest sign a Pod needs replacing is a change in flavour — a flat, muted, or slightly burnt taste means the UniTech 2.0 coil has reached the end of its life. With three pods in every pack, a fresh replacement is always ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePod\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg nic salt recommended (≤20mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with both the 0.6Ω and 0.8Ω Xlim V3 pods for a clean, accurate, and deeply satisfying MTL and RDTL vaping experience.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHigh-VG e-liquids of 70VG or above are not suitable for either Pod option — the thicker consistency does not wick efficiently through the UniTech 2.0 coil at these resistance levels and wattages. For high-VG shortfill vaping, a sub-ohm tank setup is the recommended alternative.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e3x 2ml refillable pods per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Capacity\u003c\/td\u003e\n\u003ctd\u003e2ml (UK TPD compliant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Construction\u003c\/td\u003e\n\u003ctd\u003ePCTG — transparent body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Technology\u003c\/td\u003e\n\u003ctd\u003eUniTech 2.0 mesh — pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlavour Improvement\u003c\/td\u003e\n\u003ctd\u003e50% better than V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Lifespan Improvement\u003c\/td\u003e\n\u003ctd\u003e30% longer than V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.6Ω \/ 0.8Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e14W–25W (RDTL \/ Light RDL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e12W–16W (MTL — do not exceed 20W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003eRDTL \/ Warm MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003eMTL (Mouth-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFill System\u003c\/td\u003e\n\u003ctd\u003eTop-fill silicone port — refill without removing the Pod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Connection\u003c\/td\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeak Protection\u003c\/td\u003e\n\u003ctd\u003eAnti-leak construction — sealed silicone port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nic salts — 10mg recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nic salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eHigh-VG e-liquids 70VG or above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eXlim, Xlim SE\/SE2, Xlim V2, Xlim Pro\/Pro2\/Pro3, Xlim SQ Pro\/SQ Pro2, Xlim GO, Xlim 3 Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eXlim C \/ NeXlim \/ VPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD \/ TRPR compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e3x OXVA Xlim V3 Top Fill 2ml Refillable Pods (0.6Ω or 0.8Ω — option of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eCompatible with the OXVA Xlim series only — not compatible with the Xlim C, NeXlim, or VPrime devices. Do not run the 0.8Ω above 20W. Always prime before first use. Devices and e-liquid sold separately at QSS Vape.\u003c\/p\u003e","brand":"Oxva","offers":[{"title":"0.6 Ohm","offer_id":57436455076215,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm","offer_id":57436455108983,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm 3ml","offer_id":57436455141751,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm 3ml","offer_id":57436455174519,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/oxva-xlim-pro-pods-top-fill-3-pack.webp?v=1788452633"},{"product_id":"oxva-xlim-ez-replacement-pod-cartridges","title":"OXVA Xlim EZ Replacement Pod Cartridges","description":"\u003cp dir=\"ltr\"\u003eThe OXVA Xlim EZ Replacement Pod Cartridges are the latest and most user-friendly generation of refillable Pod in the entire OXVA Xlim range — a thoughtful, meaningful upgrade over the V3 pods that makes the refilling experience faster, cleaner, and more intuitive than any previous Xlim Pod format, while also delivering improved mesh coil technology and better leak resistance throughout. The EZ name tells you everything you need to know — this is the Xlim Pod that was designed from the ground up to make the one thing you do with a refillable Pod every day as effortless as possible.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a pack of three and available in four resistance options — \u003cstrong\u003e0.4Ω (26–30W)\u003c\/strong\u003e, \u003cstrong\u003e0.6Ω (20–25W)\u003c\/strong\u003e, \u003cstrong\u003e0.8Ω (12–16W)\u003c\/strong\u003e, and \u003cstrong\u003e1.2Ω (10–12W)\u003c\/strong\u003e — the Xlim EZ cartridges cover the full range of vaping styles from a warm, open RDTL draw right through to the tightest, most cigarette-like MTL pull the Xlim platform can deliver. Every Pod uses OXVA's latest integrated mesh coil technology, a leak-proof body, and the EZ platform's unique snap-off mouthpiece top-fill design, which eliminates the rubber stopper of the V3 generation.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOne important note for UK vapers: the \u003cstrong\u003e0.6Ω Pod holds 2ml\u003c\/strong\u003e of e-liquid — the UK TPD-compliant standard — while the \u003cstrong\u003e0.4Ω, 0.8Ω, and 1.2Ω pods hold 3ml\u003c\/strong\u003e. Both capacities are available at QSS Vape — the 2ml version of the 0.6Ω is the UK-legal standard and the version sold here.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe EZ Difference — What Makes the Snap-Off Mouthpiece Better\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIf you've used Xlim V2 or V3 pods before, the first thing you'll notice about the EZ cartridge is how much more intuitive the refilling process feels — and that difference comes down entirely to the snap-off mouthpiece design.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe V3 Pod uses a rubber stopper on the side of the Pod body that you pull back to access the fill port — a process that works well but requires a little fiddling, especially in poor lighting or one-handed — while the EZ Pod takes a completely different approach. The entire mouthpiece snaps cleanly off the top of the Pod to expose the fill port. Fill through the now-open top, snap the mouthpiece back on until it clicks firmly into place, and you're done. The fill port sits at the very top of the Pod under the mouthpiece rather than on the side, making the process more intuitive, less likely to spill e-liquid, and significantly cleaner in everyday situations.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBeyond the fill method, the EZ pods also feature an ergonomic mouthpiece that's slightly wider and more comfortable in the mouth than the narrower V3 tip — a small but genuinely noticeable improvement for vapers who use their Xlim kit all day. The improved leak-proof construction of the EZ platform offers better leak resistance than the V3 generation, and the upgraded mesh coil inside each EZ Pod delivers a longer coil lifespan than both the V2 and V3 predecessors — meaning fewer Pod changes and lower ongoing costs over time.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eResistances and wattage ranges across the EZ range are identical to the V3 Pod range — so if you switch from V3 to EZ pods on the same device, you don't need to change any settings. The EZ pods drop straight in, perform at the same wattage levels you're already used to, and refill more cleanly every time.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFour Resistance Options — Choosing the Right Xlim EZ Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.4Ω EZ Mesh Pod\u003c\/strong\u003e — 26W–30W | RDTL \/ Loose DTL | 3ml capacity\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most open and vapour-forward Pod in the Xlim EZ range — a warm, loose RDTL draw at 26–30W that produces the most vapour and the most intense flavour experience the Xlim platform can deliver. The 0.4Ω is the choice for vapers who want the maximum performance the Xlim EZ system can offer — warm, dense vapour with a bold, full-bodied flavour profile that's a genuine step up from the tighter MTL options in intensity and cloud production. The 3ml capacity is particularly welcome at this wattage — higher power output means faster e-liquid consumption, and the extra millilitre means noticeably fewer refills throughout the day.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant compatibility note:\u003c\/strong\u003e The 0.4Ω EZ Pod is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the Xlim SE, Xlim SQ, Xlim V2, Xlim SE Bonus, or Xlim SE Bonus Classic — these devices do not have sufficient power output for the 0.4Ω coil. Check that your device is compatible before selecting this option. Best with 50\/50 VG\/PG freebase at 3mg–6mg or lower-strength nicotine salts at 6mg–10mg.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω EZ Mesh Pod\u003c\/strong\u003e — 20W–25W | RDTL \/ Warm MTL | 2ml capacity (UK TPD)\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe versatile mid-point of the EZ range — a warm, balanced draw that sits comfortably between a loose MTL and a light RDTL, making it one of the most broadly popular options across the entire Xlim platform. At 20–25W, the 0.6Ω produces noticeably more warmth and flavour presence than the MTL options without stepping into the more open vapour territory of the 0.4Ω — a genuinely satisfying everyday draw that works brilliantly for vapers who want more from their Xlim kit than a tight cigarette-style pull provides. The UK version's 2ml capacity is the standard TPD-compliant format. Best with 50\/50 VG\/PG freebase and nicotine salts at 10mg strength — Ecigone and OXVA advise against 20mg nic salts at higher wattages with the 0.6Ω due to the increased vapour production.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.8Ω EZ Mesh Pod\u003c\/strong\u003e — 12W–16W | MTL | 3ml capacity\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe MTL specialist of the EZ range — a smooth, cool, focused mouth-to-lung draw at a comfortable 12–16W that's the natural, immediately familiar choice for former smokers making the switch or for vapers who prefer the most cigarette-like experience the Xlim platform offers. The draw is noticeably more restricted than the 0.6Ω — cooler, tighter, and producing less vapour — with a clean, accurate flavour profile and a satisfying throat hit at 20mg nicotine salt strength that arrives quickly and smoothly without any harshness. The 3ml capacity is a genuine practical advantage at this resistance level — the lower wattage means slower e-liquid consumption, and the extra millilitre extends the time between refills even further. \u003cstrong\u003eDo not exceed 20W with the 0.8Ω\u003c\/strong\u003e — higher wattage shortens coil life significantly. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.2Ω EZ Mesh Pod\u003c\/strong\u003e — 10W–12W | Tight MTL | 3ml capacity\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe tightest and most cigarette-like draw in the entire Xlim EZ range — the 1.2Ω operates at just 10–12W and delivers the most restricted, coolest, and most discreet MTL experience the Xlim platform can produce. Minimal vapour output, a cool, highly focused draw, and an immediate, satisfying throat hit at 20mg nic salt strength make this the go-to Pod for new switchers from cigarettes who want a draw that feels familiar and natural from day one. The 1.2Ω also offers the best battery economy of any EZ resistance option — the very low operating wattage means the Xlim device battery lasts significantly longer between charges, making it an excellent choice for vapers who prioritise all-day battery life above all else. The 3ml capacity extends the time between refills impressively at 10–12W. Best with high-PG or 50\/50 VG\/PG nicotine salt e-liquids at 20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eSnap-Off Top Fill — The Cleanest Refill on the Market\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eRefilling an Xlim EZ Pod is one of the most satisfying and mess-free refilling experiences available from any Pod kit in the UK. Grip the mouthpiece at the top of the Pod and snap it off cleanly — no force required; it releases with a clean, confident click. The fill port at the top of the Pod body is now fully exposed and easy to access. Insert your 10ml nicotine salt bottle nozzle, fill to the maximum line, and snap the mouthpiece firmly back into place until it clicks securely shut. The entire process takes five seconds from start to finish and can be done without removing the Pod from the device. The mouthpiece click-fit creates an immediate, secure seal that prevents leaks back through the fill port during vaping or everyday carry.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImproved Leak-Proof Construction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Xlim EZ Pod features OXVA's improved leak-proof construction — a step up in leak resistance over the V3 generation that keeps e-liquid securely contained throughout the Pod's entire lifespan. The snap-on mouthpiece design eliminates the side-fill rubber stopper as a potential leak point, and improved internal sealing throughout the EZ Pod body keeps everything tighter and cleaner during everyday carry, no matter the orientation. The colour-coded pods also make it easy to identify your chosen resistance at a glance — each resistance option has a distinct colour marking on the Pod body so you can always tell your 0.8Ω from your 0.6Ω at a quick look.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full Xlim Family\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOXVA Xlim EZ pods are compatible with the following OXVA devices:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eOXVA Xlim (original)\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SE\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SE 2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim V2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim Pro\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim Pro 2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim Pro 3\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SQ\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SQ Pro\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SQ Pro 2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim GO\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim 3 Ultra\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim Classic Edition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant compatibility notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eThe \u003cstrong\u003e0.4Ω\u003c\/strong\u003e EZ Pod is \u003cstrong\u003enot\u003c\/strong\u003e compatible with the Xlim SE, Xlim SQ, Xlim V2, Xlim SE Bonus, or Xlim SE Bonus Classic — these devices lack sufficient power output\u003c\/li\u003e\n\u003cli\u003eXlim EZ pods are \u003cstrong\u003enot\u003c\/strong\u003e compatible with the \u003cstrong\u003eXlim C\u003c\/strong\u003e — this device uses its own specific Pod format\u003c\/li\u003e\n\u003cli\u003eXlim EZ pods are \u003cstrong\u003enot\u003c\/strong\u003e compatible with the \u003cstrong\u003eOXVA NeXlim\u003c\/strong\u003e or \u003cstrong\u003eOXVA VPrime\u003c\/strong\u003e — these use dedicated pods for their own platforms\u003c\/li\u003e\n\u003cli\u003eResistances and wattage settings are \u003cstrong\u003eidentical to the V3 pods\u003c\/strong\u003e — switching between V3 and EZ on the same device requires no settings changes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your Xlim EZ Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFitting and priming a fresh Xlim EZ Pod is the most straightforward Pod installation process in the Xlim range. Pull the old Pod from the device's magnetic connection and set it aside. Before inserting the fresh Pod, fill it first — snap the mouthpiece off the top of the Pod, fill to the maximum line with your chosen e-liquid, and snap the mouthpiece firmly back into place. Allow at least five to ten minutes for the mesh coil to fully saturate with e-liquid before inserting the Pod into the device. This priming step is important and particularly worth observing with the 1.2Ω and 0.8Ω options where the coil needs adequate time to reach full saturation before the first draw. Push the filled Pod into the device's magnetic connection until it clicks securely into place, start at the lower end of the recommended wattage range, and work upwards gradually over the first few draws.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Xlim EZ Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe upgraded mesh coil inside the Xlim EZ Pod is rated for a longer lifespan than both the V2 and V3 predecessors — most vapers report five to eight refills from each Pod before the flavour quality starts to decline, typically translating to one to two weeks of daily vaping depending on resistance, wattage, and e-liquid type. The 3ml capacity pods (0.4Ω, 0.8Ω, 1.2Ω) naturally last longer between refills than the 2ml 0.6Ω UK version. The clearest sign a Pod needs replacing is a change in flavour — a flat, muted, or slightly burnt taste indicates the mesh coil is spent. Reduced vapour production is a secondary indicator. With three pods in every pack, a fresh replacement is always ready when you need it.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePod\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eCapacity\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4Ω\u003c\/td\u003e\n\u003ctd\u003e3ml\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or lower-VG freebase\u003c\/td\u003e\n\u003ctd\u003e3mg–10mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6Ω\u003c\/td\u003e\n\u003ctd\u003e2ml (UK)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg nic salt recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8Ω\u003c\/td\u003e\n\u003ctd\u003e3ml\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.2Ω\u003c\/td\u003e\n\u003ctd\u003e3ml\u003c\/td\u003e\n\u003ctd\u003eHigh-PG or 50\/50 nic salts\u003c\/td\u003e\n\u003ctd\u003e20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with the 0.6Ω, 0.8Ω, and 1.2Ω Xlim EZ pods. High-VG e-liquids of 70VG or above are not recommended for any EZ resistance option — the integrated mesh coil is optimised for the thinner consistency of 50\/50 and nic salt formulas across all four resistance levels.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e3x refillable EZ Pod cartridges per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Capacity\u003c\/td\u003e\n\u003ctd\u003e0.6Ω = 2ml (UK TPD) \/ 0.4Ω, 0.8Ω, 1.2Ω = 3ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Material\u003c\/td\u003e\n\u003ctd\u003ePCTG — transparent body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Type\u003c\/td\u003e\n\u003ctd\u003eIntegrated mesh coil — pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Generation\u003c\/td\u003e\n\u003ctd\u003eLatest EZ mesh — improved lifespan over V2 and V3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFill System\u003c\/td\u003e\n\u003ctd\u003eSnap-off mouthpiece top-fill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Connection\u003c\/td\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeak Protection\u003c\/td\u003e\n\u003ctd\u003eImproved leak-proof construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Coding\u003c\/td\u003e\n\u003ctd\u003eColour-coded by resistance for easy identification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.4Ω \/ 0.6Ω \/ 0.8Ω \/ 1.2Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003e26W–30W — RDTL \/ Loose DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e20W–25W — RDTL \/ Warm MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e12W–16W — MTL (do not exceed 20W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.2Ω)\u003c\/td\u003e\n\u003ctd\u003e10W–12W — Tight MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003eRDTL \/ Loose DTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003eRDTL \/ Warm MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003eMTL (Mouth-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (1.2Ω)\u003c\/td\u003e\n\u003ctd\u003eTight MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 freebase — 3mg–10mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 and nic salts — 10mg recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.8Ω\/1.2Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 and nic salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eXlim, Xlim SE\/SE2, Xlim V2, Xlim Pro\/Pro2\/Pro3, Xlim SQ\/SQ Pro\/SQ Pro2, Xlim GO, Xlim 3 Ultra, Xlim Classic Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eXlim C \/ NeXlim \/ VPrime \/ Xlim SE Bonus (0.4Ω only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV3 Wattage Compatibility\u003c\/td\u003e\n\u003ctd\u003eIdentical — no settings change needed when switching from V3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD \/ TRPR compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e3x OXVA Xlim EZ 2ml \/ 3ml Refillable Pod Cartridges (resistance of choice — 0.4Ω, 0.6Ω, 0.8Ω, or 1.2Ω)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003e0.4Ω not compatible with Xlim SE, Xlim SQ, Xlim V2, Xlim SE Bonus, or Xlim SE Bonus Classic. Not compatible with the Xlim C, NeXlim, or VPrime. Do not exceed 20W with the 0.8Ω. Always prime before first use. Devices and e-liquid are sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Oxva","offers":[{"title":"0.6 Ohm XL","offer_id":57436500722039,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm XL","offer_id":57436500754807,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/ez_cart_0.6.webp?v=1788520907"},{"product_id":"oxva-nexlim-replacement-pod-cartridges","title":"OXVA NeXlim Replacement Pod Cartridges","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe OXVA NeXlim Replacement Pod Cartridges are the official replacement pods for the OXVA NeXlim, NeXlim 2, NeXlim 2 Mini, and NeXlim GO Pod kits — and they bring something genuinely different to the refillable Pod market. Where the Xlim V3 and EZ pods use a single mesh coil inside each Pod, the NeXlim pods use two. OXVA's UNITECH 2.0 dual mesh coil system fires two mesh strips simultaneously inside every Pod—doubling the heated surface area in contact with the e-liquid, dramatically increasing vapour production and flavour intensity, and extending coil lifespan far beyond what a single mesh Pod can achieve. OXVA rates the NeXlim Pod at 200% more flavour and 200% longer coil life than standard single mesh pods — and in practice, the difference is immediately and clearly noticeable from the first puff.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a convenient pack of three 2ml refillable pods and available in three resistance options — \u003cstrong\u003e0.6Ω (20–40W)\u003c\/strong\u003e, \u003cstrong\u003e0.8Ω (12–32W)\u003c\/strong\u003e, and \u003cstrong\u003e1.2Ω (10–25W)\u003c\/strong\u003e — the NeXlim pods cover the full range of vaping styles from a warm, vapour-forward RDTL draw right through to the tightest, most cigarette-like MTL experience the NeXlim platform can deliver. Every Pod features a clean top-fill silicone port, a five-layer leak-proof structure, and a transparent PCTG body — all backed by OXVA's MHRA-registered UK TPD compliance.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCritical compatibility note:\u003c\/strong\u003e NeXlim pods are designed exclusively for the OXVA NeXlim, NeXlim 2, NeXlim 2 Mini, and NeXlim GO Pod kits. They are \u003cstrong\u003enot\u003c\/strong\u003e compatible with any device in the OXVA Xlim series — including the Xlim Pro, Xlim Pro 2, Xlim Pro 3, Xlim SE, Xlim SQ, or any other Xlim variant. The NeXlim platform is a completely separate Pod system from the Xlim range, and the pods are not interchangeable in either direction.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eUNITECH 2.0 Dual Mesh Technology — Why Two Coils Are Better Than One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe defining feature that sets the NeXlim Pod apart from every other OXVA Pod — and from most refillable pods in the UK market — is its UNITECH 2.0 dual mesh coil system. Rather than a single mesh strip heating the e-liquid, the NeXlim Pod contains two separate mesh coil elements that fire together simultaneously inside the Pod body. This dual-firing approach delivers three immediate and meaningful advantages over single-mesh Pod designs.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDouble the heated surface area:\u003c\/strong\u003e Two mesh strips in contact with the e-liquid means twice as much e-liquid is vaporised per draw compared to a single-mesh Pod of the same resistance. The result is denser, richer, more flavour-saturated vapour on every single puff. This fuller, more immersive flavour experience makes the NeXlim Pod the highest-performing refillable Pod in the entire OXVA range.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEven heat distribution:\u003c\/strong\u003e The dual mesh arrangement distributes heat more evenly across the wicking cotton than a single-point coil can — eliminating hot spots, preventing uneven cotton degradation, and ensuring consistent, accurate flavour from the first puff to the last before the Pod needs replacing.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExtended coil lifespan:\u003c\/strong\u003e By sharing the heat load across two mesh elements rather than concentrating it through one, the dual mesh system significantly reduces thermal stress on each mesh strip — extending overall coil lifespan well beyond what a single-mesh Pod at the same resistance could sustain. OXVA rates the UNITECH 2.0 dual mesh at 200% longer coil life than standard single-mesh pods — and in everyday use, most NeXlim vapers report getting noticeably more refills from each Pod before the flavour starts to fade.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe dual mesh coil is wrapped in a five-layer cotton matrix that maximises e-liquid absorption and ensures consistent saturation of both mesh elements throughout the Pod's entire lifespan — keeping every puff smooth, rich, and flavour-accurate right up until it's time to swap.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFive-Layer Leak-Proof Structure — Genuinely Mess-Free\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOXVA's commitment to leak prevention in the NeXlim Pod goes well beyond a standard silicone seal — the NeXlim's 5-layer leak-proof structure combines five distinct protective measures that work together to keep e-liquid completely contained under virtually any circumstances.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe five layers include triple silicone seals at the key e-liquid containment points, a bottom-mounted coil design that positions the heating element below the e-liquid chamber rather than within the airflow path, a reinforced PCTG Pod structure that maintains its integrity under pressure, and a sealed top-fill port that stays firmly closed unless deliberately opened. Whether the device is in your pocket, your bag, or carried at an angle, the five-layer system provides leak resistance that makes everyday carry genuinely worry-free — no e-liquid on your hands, no stained pockets, and no gurgling draws caused by e-liquid bypassing the coil.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThree Resistance Options — Choosing the Right NeXlim Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω UNITECH 2.0 Dual Mesh Pod\u003c\/strong\u003e — 20W–40W | RDTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most open and vapour-forward option in the NeXlim range — a warm, versatile RDTL draw that delivers the most intense flavour experience and the highest cloud production the NeXlim platform can produce. At 20–40W with a wide operating range that suits the NeXlim kit's Boost and ECO modes, the 0.6Ω produces a noticeably bolder, fuller draw than the MTL options — denser vapour, warmer temperature, and the full impact of the dual mesh coil's doubled surface area at every puff. The wide wattage range of the 0.6Ω makes it the most versatile Pod in the NeXlim range — it performs well across ECO mode at the lower end for a more moderate experience. It opens up fully in Boost mode at the higher end for the most intense NeXlim performance possible.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBest with 50\/50 VG\/PG freebase e-liquids at 3mg–10mg strength or lower-strength nicotine salts. Vapers who prefer 20mg nic salts should stay at the lower end of the 0.6Ω's wattage range for a comfortable throat hit — the increased vapour production at higher wattages makes full-strength nic salts more intense than most vapers find comfortable.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.8Ω UNITECH 2.0 Dual Mesh Pod\u003c\/strong\u003e — 12W–32W | MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe versatile MTL option in the NeXlim range — a warm, satisfying mouth-to-lung draw across a wide wattage range that suits both ECO and Boost mode operation. The 0.8Ω delivers a noticeably warmer and more flavour-forward MTL experience than the 1.2Ω while remaining firmly in MTL territory throughout — a balanced, comfortable everyday draw that works brilliantly with 20mg nicotine salt e-liquids at moderate wattages and feels genuinely satisfying across extended vaping sessions. The dual mesh coil delivers noticeably richer flavour than a single-mesh 0.8Ω Pod could achieve — the extra heated surface area extracts more character from your chosen e-liquid with every single puff, making familiar nic salt flavours taste noticeably more vibrant and full-bodied.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBest with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.2Ω UNITECH 2.0 Dual Mesh Pod\u003c\/strong\u003e — 10W–25W | Tight MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe tightest, coolest, and most cigarette-like draw in the NeXlim range — the 1.2Ω operates at a comfortable 10–25W and delivers the most restricted, most familiar MTL experience the platform can produce. The cool, focused draw and minimal vapour output make the 1.2Ω an immediately natural and comfortable choice for former smokers switching from cigarettes — familiar in character, satisfying at 20mg nic salt strength, and genuinely effortless to vape all day without any fatigue. Even at 1.2Ω, the dual mesh UNITECH 2.0 coil delivers a noticeable improvement in flavour clarity and richness over a single-mesh Pod of the same resistance — making the NeXlim 1.2Ω one of the most flavour-accurate tight MTL pods available in the UK at any price point.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBest with high-PG or 50\/50 VG\/PG nicotine salt e-liquids at 20mg strength. The best battery economy of the three options — the 10–25W operating range means the NeXlim device battery lasts longest between charges when running the 1.2Ω.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTop-Fill Design — Quick, Clean, and In-Device Refilling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery NeXlim Pod refills through a top-fill silicone port that stays securely closed during vaping and everyday carry but opens easily and cleanly when you need to top up. Locate the silicone fill port at the top of the Pod, push it gently aside to expose the fill port, insert your chosen 10ml nicotine salt bottle nozzle, fill to the maximum line, and push the silicone seal firmly back into place. The whole process takes five seconds and can be done without removing the Pod from the NeXlim device at any point — a clean, intuitive refilling experience that causes no mess and carries no risk of e-liquid spilling down the side of the device. The transparent PCTG Pod body lets you monitor your e-liquid level at a glance so you can top up before the Pod runs low and maintain consistent coil saturation throughout.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The NeXlim Family Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOXVA NeXlim replacement pods are compatible with the following OXVA devices:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eOXVA NeXlim\u003c\/li\u003e\n\u003cli\u003eOXVA NeXlim 2\u003c\/li\u003e\n\u003cli\u003eOXVA NeXlim 2 Mini\u003c\/li\u003e\n\u003cli\u003eOXVA NeXlim GO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThese pods are not compatible with any OXVA Xlim device.\u003c\/strong\u003e The NeXlim uses a completely different Pod connection, coil platform, and Pod geometry than the entire Xlim series—the pods are not interchangeable. If you own an Xlim device, please see the Xlim V3 Top Fill pods or Xlim EZ cartridges at QSS Vape. If you own a NeXlim, VPrime, or any other OXVA device not listed above, please check its specific Pod compatibility before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your NeXlim Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFitting a fresh NeXlim Pod is a quick, clean, magnetic process. Remove the old Pod from the NeXlim device by pulling it upwards from the magnetic connection. Before fitting the fresh Pod, fill it through the top-fill silicone port — open the port, fill to the maximum line with your chosen nicotine salt or 50\/50 e-liquid, and seal the port firmly. Allow at least five to ten minutes for the dual UNITECH 2.0 mesh coils to fully saturate with e-liquid before inserting the Pod into the device — this priming step is especially important with the NeXlim's dual mesh construction, where both coil elements need to reach full saturation for the best possible first-draw flavour. Push the filled Pod into the NeXlim device's magnetic connection until it clicks firmly and securely into place, start at the lower end of the recommended wattage range, and work upwards gradually over the first few draws.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNever vape on an under-saturated NeXlim Pod — the dual mesh coil delivers outstanding performance when fully saturated, but a dry first draw on either mesh element can compromise the flavour quality of the Pod before it has a chance to deliver its full potential.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your NeXlim Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe UNITECH 2.0 dual mesh coil's extended lifespan — rated at 200% longer than standard single-mesh pods — means most NeXlim vapers report significantly more refills from each Pod before flavour quality starts to decline than they'd get from a standard single-mesh Pod of similar resistance. In everyday use, most vapers get between five and ten refills from each NeXlim Pod depending on resistance, wattage, e-liquid type, and usage frequency — typically translating to two to three weeks of daily vaping from a single Pod. Lower wattages and cleaner e-liquid profiles extend lifespan further; higher wattages and sweeter e-liquids shorten it. The clearest sign a Pod needs replacing is a change in flavour — a flat, muted, or slightly scorched taste means the dual mesh coil is spent. With three pods in every pack, a fresh replacement is always ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePod\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase or lower-strength nic salts\u003c\/td\u003e\n\u003ctd\u003e3mg–10mg (≤20mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase or nicotine salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.2Ω\u003c\/td\u003e\n\u003ctd\u003eHigh-PG or 50\/50 VG\/PG nicotine salts\u003c\/td\u003e\n\u003ctd\u003e20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with all three NeXlim Pod resistances for a clean, accurate, and deeply satisfying vaping experience.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHigh-VG e-liquids of 60VG or above are not recommended for any NeXlim Pod — the integrated dual mesh coil is optimised for the thinner consistency of 50\/50 and nic salt formulas, and high-VG e-liquids will not wick efficiently through the dual mesh structure at these resistance levels, causing dry hits and significantly shortening Pod lifespan.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable style=\"width: 100%; height: 529.032px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth scope=\"col\" style=\"width: 28.0393%; height: 19.5938px;\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"width: 69.1288%; height: 19.5938px;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003ePack Contents\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e3x 2ml refillable Pod cartridges per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003ePod Capacity\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e2ml (UK TPD compliant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003ePod Material\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003ePCTG — transparent body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 39.1875px;\"\u003eCoil Technology\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 39.1875px;\"\u003eUNITECH 2.0 — dual mesh coil (two mesh strips fire simultaneously)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eFlavour Improvement\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e200% more flavour vs standard single-mesh pods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 39.1875px;\"\u003eCoil Lifespan Improvement\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 39.1875px;\"\u003e200% longer lifespan vs standard single-mesh pods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eCoil Wrapping\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eFive-layer cotton matrix — maximised absorption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 39.1875px;\"\u003eLeak Protection\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 39.1875px;\"\u003e5-layer leak-proof structure — triple silicone seals + reinforced body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eFill System\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eTop-fill silicone port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003ePod Connection\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eResistance Options\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e0.6Ω \/ 0.8Ω \/ 1.2Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eWattage (0.6Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e20W–40W — RDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eWattage (0.8Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e12W–32W — MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eWattage (1.2Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e10W–25W — Tight MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eVaping Style (0.6Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eRDTL \/ Warm MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eVaping Style (0.8Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eMTL (Mouth-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eVaping Style (1.2Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eTight MTL \/ Cigarette-Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eBest E-Liquid (0.6Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e50\/50 freebase — 3mg–10mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eBest E-Liquid (0.8Ω\/1.2Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e50\/50 and nic salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eNot Recommended\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eHigh-VG e-liquids 60VG or above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eNeXlim \/ NeXlim 2 \/ NeXlim 2 Mini \/ NeXlim GO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eNot Compatible\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eAny OXVA Xlim device (Xlim Pro, Xlim SE, Xlim SQ, etc.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eCompliance\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eUK TPD \/ TRPR compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e3x OXVA NeXlim UNITECH 2.0 Dual Mesh 2ml Refillable Pod Cartridges (resistance of choice — 0.6Ω, 0.8Ω, or 1.2Ω)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with OXVA NeXlim, NeXlim 2, NeXlim 2 Mini, and NeXlim GO only. Not compatible with any OXVA Xlim device. Always prime before first use. High-VG e-liquids are not recommended. Devices and e-liquids are sold separately at QSS Vape.\u003c\/p\u003e","brand":"Oxva","offers":[{"title":"0.6 Ohm (XL)","offer_id":57437695672695,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm (XL)","offer_id":57437695705463,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm (XL)","offer_id":57437695738231,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/nexlim.webp?v=1788520273"},{"product_id":"voopoo-argus-top-fill-replacement-pod-cartridges","title":"Voopoo Argus Top Fill Replacement Pod Cartridges","description":"\u003cp dir=\"ltr\"\u003eThe Voopoo Argus Top Fill Replacement Pod Cartridges are the official, genuine replacement pods for the entire Voopoo Argus Pod kit family — a versatile, well-engineered three-resistance Pod range that covers everything from a warm, open RDTL draw right through to a tight, cigarette-style MTL pull, all in the same convenient top-fill format that makes everyday refilling genuinely effortless.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAvailable at QSS Vape in the latest V2 generation — featuring Voopoo's advanced iCOSM CODE 2.0 coil technology with premium golden cotton rated to 260°C and a 30-day liquid-seal leak-proof design — sold in a pack of three 2ml refillable pods across three resistance options: \u003cstrong\u003e0.4Ω (18–30W)\u003c\/strong\u003e, \u003cstrong\u003e0.7Ω (14–18W)\u003c\/strong\u003e, and \u003cstrong\u003e1.0Ω (10–14W)\u003c\/strong\u003e. Every Pod uses a pre-installed integrated mesh coil, a four-hole air inlet for balanced airflow, and a full-view transparent PCTG body that lets you monitor your e-liquid level at a glance — combining the performance you'd expect from a premium Voopoo product with the day-to-day practicality that makes the Argus platform so consistently popular.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eA note on Pod generations:\u003c\/strong\u003e Voopoo produce both V1 and V2 versions of the Argus Top Fill Pod. The V2 generation — stocked at QSS Vape — upgrades the coil technology to iCOSM CODE 2.0 with golden cotton and introduces the 30-day liquid-seal leak-proof system. Resistances and wattage ranges are identical across both generations, and both versions are compatible with the same range of Argus devices.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCritical compatibility note:\u003c\/strong\u003e The Argus Top Fill pods covered here are the top-fill cartridges for current Argus devices. They are \u003cstrong\u003enot\u003c\/strong\u003e compatible with the original Argus Pod or Argus P1 — those devices use the older side-fill Pod with a hidden rubber stopper on the side. If your current Pod has a side rubber plug rather than a top-opening fill port, you need standard Argus side-fill replacement pods, available separately at QSS Vape.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eiCOSM CODE 2.0 — The Coil Technology Inside Every V2 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Argus Top Fill V2 pods use Voopoo's iCOSM CODE 2.0 coil technology — a meaningful upgrade over the V1 coil generation that delivers improved flavour accuracy, better vapour consistency, and a significantly more durable coil construction throughout the Pod's lifespan.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eGolden Cotton — High-Performance Wicking at Up to 260°C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe standout material upgrade in the iCOSM CODE 2.0 generation is the shift to premium golden cotton wicking. This specially processed, high-performance wicking material maintains structural integrity and wicking efficiency at temperatures up to 260°C. Where standard organic cotton can compress, discolour, and lose wicking efficiency under sustained heat at higher wattages, the golden cotton in the V2 pods remains dimensionally stable and consistently absorbent throughout the Pod's entire lifespan — delivering cleaner, more accurate flavour from the first puff to the very last, with no gradual drop-off in wicking performance as the Pod ages. The golden cotton's enhanced heat resistance is particularly significant for the 0.4Ω Pod at 18–30W, where the coil operates at a higher sustained temperature than the MTL options and where standard cotton would degrade more noticeably over time.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eiCOSM Mesh Coil Structure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe iCOSM CODE 2.0 mesh coil heats e-liquid evenly across a wide, uniform surface area—eliminating the localised hot spots conventional round-wire coils can produce and delivering a consistent, clean flavour profile throughout the coil's life. The mesh and golden cotton combination produces noticeably better vapour saturation on every draw than the V1 generation — richer, warmer, and more full-bodied, particularly on fruit and dessert nicotine salt profiles, where improved wicking efficiency extracts every nuance of the flavour clearly and accurately.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e30-Day Liquid-Seal Leak-Proof Design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVoopoo's patented multi-layer leak-proof technology in the V2 Pod features a liquid-seal shield rated for 30 days of continuous use, combining multiple silicone sealing layers at the fill port, the coil base, and the pod-to-body connection point to keep e-liquid securely contained throughout the Pod's lifespan. Whether the device is in your pocket, your bag, or on its side overnight, the 30-day liquid seal gives you the confidence to carry the Argus wherever you go without worrying about e-liquid finding its way out.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFour-Hole Air Inlet — Balanced, Smooth Airflow on Every Draw\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Argus Top Fill Pod features a four-hole air inlet design that distributes airflow evenly around the coil from four directions at once — rather than a single- or dual-slot design that can create uneven airflow turbulence. The four-hole arrangement ensures balanced, smooth vapour delivery on every draw, with a consistent airflow character that doesn't change as you adjust the device's wattage. The result is a clean, comfortable draw across all three resistance options — no whistling, no uneven pull, and no restriction that creeps in as the Pod depletes.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThree Resistance Options — Choosing the Right Argus Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.4Ω Argus Top Fill V2 Pod\u003c\/strong\u003e — 18W–30W | RDTL | Loose Draw\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most open and vapour-forward Pod in the Argus Top Fill range — a warm, satisfying RDTL draw at 18–30W that produces noticeably more vapour and a fuller, more intense flavour experience than the MTL options. The 0.4Ω sits right at the boundary between a loose RDTL and a light DTL experience — open enough to feel genuinely airy but not so wide that it loses the focused, mouth-filling character that makes the Argus platform such a compelling everyday device. The iCOSM CODE 2.0 golden cotton handles the 18–30W heat load with impressive consistency, delivering clean flavour right through the Pod's life without the wicking degradation standard cotton can suffer at these sustained temperatures.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBest with 50\/50 VG\/PG freebase e-liquids at 3mg–10mg strength. Also works well with lower-strength nicotine salts at 6mg–10mg — the increased vapour production at 18–30W makes full-strength 20mg nic salts more intense than most vapers find comfortable at this resistance.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.7Ω Argus Top Fill V2 Pod\u003c\/strong\u003e — 14W–18W | MTL | All-Round Favourite\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most popular and most widely purchased Pod in the entire Argus Top Fill range — and it's not hard to understand why. The 0.7Ω delivers a warm, balanced MTL draw at 14–18W that hits a brilliantly satisfying sweet spot between flavour density and vapour production, making it genuinely rewarding to vape all day without ever feeling fatiguing or harsh. It's the resistance that most current Argus kits ship with as standard — a clear indication that Voopoo consider it the ideal everyday starting point for most vapers on the Argus platform.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe iCOSM CODE 2.0 mesh at 0.7Ω delivers clean, accurate flavour from every puff — the golden cotton keeps the coil evenly saturated, and the mesh ensures even heating throughout the Pod's life. A reliable, consistent, and deeply satisfying everyday Pod that works brilliantly as an all-day MTL vape for the vast majority of Argus users. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.0Ω Argus Top Fill V2 Pod\u003c\/strong\u003e — 10W–14W | Tight MTL | Cigarette-Style\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe tightest and most cigarette-like draw in the Argus Top Fill range — the 1.0Ω operates at just 10–14W and delivers the most restricted, coolest, and most discreet MTL experience the Argus platform can produce. A cool, focused draw with minimal, discreet vapour output and a satisfying, immediate throat hit at 20mg nicotine salt strength — this is the Pod for former smokers who want the draw that feels most familiar and natural from day one, or for experienced MTL vapers who prefer the tightest, most cigarette-style character the Argus can offer.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe low operating wattage also delivers the best battery economy of the three options — the device battery lasts significantly longer between charges when running the 1.0Ω at 10–14W compared to the 0.4Ω at 18–30W. Best with high-PG or 50\/50 VG\/PG nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTop-Fill Design — Fast, Clean, In-Device Refilling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Argus Top Fill Pod refills through a top-fill port — locate the fill cap at the top of the Pod, pop it open, fill to the maximum line, and push it firmly shut. The whole process takes five seconds and can be done without removing the Pod from the Argus device. The 30-day liquid-seal keeps the fill port firmly sealed during vaping and everyday carry, and the full-view transparent PCTG body lets you see exactly how much e-liquid remains in the Pod at all times without removing it from the device. Clean, intuitive, and genuinely mess-free every single time.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full Argus Family\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVoopoo Argus Top Fill Pod cartridges are compatible with the following Voopoo Argus devices:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVoopoo Argus Pod SE\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus Z \/ Argus Z2\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus P1S\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus P2\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus G \/ Argus G2 \/ Argus G2 Mini \/ Argus G2 Mini Plus\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus G3 \/ Argus G3 Mini\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus Klyc\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus Matrix\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVoopoo Argus Pod (original) — uses older side-fill Pod with rubber stopper\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus P1 — uses older side-fill Pod with rubber stopper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eIf your current Pod has a side rubber plug rather than a top-opening fill port, it is the older side-fill format — please check the standard Argus replacement pods at QSS Vape instead.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your Argus Top Fill Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFitting a fresh Argus Top Fill Pod is a quick, clean, magnetic process. Remove the old Pod from the Argus device by pulling it upwards from the magnetic connection. Before inserting the fresh Pod, fill it through the top fill port — pop the fill cap open, fill to the maximum line with your chosen e-liquid, and close the cap firmly. Allow five minutes for the iCOSM CODE 2.0 golden cotton to fully saturate before inserting the Pod into the device. Push the filled Pod into the Argus device's magnetic connection until it clicks firmly into place. Start at the lower end of the recommended wattage range, and work upwards gradually over the first few draws. Never vape immediately on an unfilled or insufficiently saturated Pod — the golden cotton performs best when fully saturated, and an under-primed first draw can permanently compromise the coil before it has a chance to deliver its full flavour potential.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Argus Top Fill Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVoopoo Argus Top Fill V2 pods typically last between one and two weeks of regular daily vaping depending on resistance, wattage, e-liquid type, and frequency. The 30-day liquid seal keeps the Pod body leak-free throughout its lifespan, even as the golden cotton nears the end of its useful life. The clearest sign a Pod needs replacing is a change in flavour — a flat, muted, or slightly burnt taste means the iCOSM CODE 2.0 coil is spent. Reduced vapour production and a gurgling draw are secondary indicators. With three pods in every pack, a fresh replacement is always ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePod\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase\u003c\/td\u003e\n\u003ctd\u003e3mg–10mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.7Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or nicotine salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.0Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 or high-PG nicotine salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with the 0.7Ω and 1.0Ω Argus Top Fill pods. The 0.4Ω pairs best with 50\/50 freebase e-liquids at 3mg–10mg.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHigh-VG e-liquids of 60VG or above are not recommended for any Argus Top Fill Pod—the pods are engineered for the thinner consistency of 50\/50 and nic salt formulas, and high-VG e-liquids will not wick efficiently through the integrated coil at these resistance levels.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e3x 2ml refillable Pod cartridges per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Generation\u003c\/td\u003e\n\u003ctd\u003eV2 — iCOSM CODE 2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Capacity\u003c\/td\u003e\n\u003ctd\u003e2ml (UK TPD compliant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Material\u003c\/td\u003e\n\u003ctd\u003ePCTG — full-view transparent body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Technology\u003c\/td\u003e\n\u003ctd\u003eiCOSM CODE 2.0 integrated mesh coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003ePremium golden cotton — rated to 260°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeak Protection\u003c\/td\u003e\n\u003ctd\u003e30-day liquid-seal shield — multi-layer leak-proof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAirflow\u003c\/td\u003e\n\u003ctd\u003eFour-hole air inlet — balanced airflow design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFill System\u003c\/td\u003e\n\u003ctd\u003eTop-fill — pop-open cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Connection\u003c\/td\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.4Ω \/ 0.7Ω \/ 1.0Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003e18W–30W — RDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.7Ω)\u003c\/td\u003e\n\u003ctd\u003e14W–18W — MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.0Ω)\u003c\/td\u003e\n\u003ctd\u003e10W–14W — Tight MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003eRDTL \/ Loose Draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.7Ω)\u003c\/td\u003e\n\u003ctd\u003eMTL — All-Round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (1.0Ω)\u003c\/td\u003e\n\u003ctd\u003eTight MTL \/ Cigarette-Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 freebase — 3mg–10mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.7Ω\/1.0Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 and nicotine salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eHigh-VG e-liquids 60VG or above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eArgus Pod SE, Argus Z\/Z2, Argus P1S, Argus P2, Argus G\/G2\/G2 Mini\/G2 Mini Plus, Argus G3\/G3 Mini, Argus Klyc, Argus Matrix, Argus A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eOriginal Argus Pod \/ Argus P1 (side-fill format)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD \/ TRPR compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e3x Voopoo Argus Top Fill V2 2ml Refillable Pod Cartridges (resistance of choice — 0.4Ω, 0.7Ω, or 1.0Ω)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eTop-fill cartridges only — not compatible with the original Argus Pod or Argus P1 (side-fill format). Always prime before first use. High-VG e-liquids not recommended. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Voopoo","offers":[{"title":"0.7 (2ml)","offer_id":57437745185143,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.7 XL","offer_id":57437745217911,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.4 XL","offer_id":57437745250679,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.0 XL","offer_id":57437745283447,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/ARGUS-V2-PODS-0.7.webp?v=1788521833"},{"product_id":"geekvape-q-series-side-fill-replacement-pods","title":"Geekvape Q Series Side Fill Replacement Pods","description":"\u003cp dir=\"ltr\"\u003eThe Geekvape Q Series Side Fill Replacement Pods are the official replacement pods for the Geekvape Q Series Pod kit range — a clean, versatile, and well-engineered four-resistance Pod family that covers every vaping style from a warm, open RDTL draw right through to the tightest, most cigarette-like MTL pull the Q platform can deliver. Built around Geekvape's VPU tech mesh coil construction for boosted flavour and extended coil life, featuring a hinged silicone side-fill port that opens and closes without removing the Pod from the device, and colour-coded by resistance band so you can tell your 0.8Ω from your 1.2Ω at a glance — the Q Series side fill pods are a practical, reliable, and genuinely satisfying everyday Pod designed to keep your Q kit performing at its absolute best.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a convenient pack of three 2ml refillable pods and available in four resistance options — \u003cstrong\u003e0.4Ω Red (25–30W)\u003c\/strong\u003e, \u003cstrong\u003e0.6Ω Orange (18–25W)\u003c\/strong\u003e, \u003cstrong\u003e0.8Ω Yellow (12–18W)\u003c\/strong\u003e, and \u003cstrong\u003e1.2Ω Green (8–12W)\u003c\/strong\u003e — these pods are compatible with the full Geekvape Q kit family, giving every Q Series vaper access to the perfect coil resistance for their preferred style without ever needing to swap devices.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eImportant note on the 0.4Ω:\u003c\/strong\u003e The 0.4Ω side-fill Pod is exclusively compatible with the Wenax Q Pro, Wenax Q Ultra, Sonder Q2, and Sonder Q3 only — it is not compatible with other Q Series devices due to their power output limitations. All other three resistances (0.6Ω, 0.8Ω, and 1.2Ω) are compatible across the wider Q Series range. Please check your specific device's compatibility before ordering the 0.4Ω option.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eVPU Tech Mesh — Better Flavour, Longer Coil Life\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Geekvape Q Series side fill Pod features Geekvape's VPU (Vaporisation Performance Upgrade) tech mesh coil. This integrated mesh coil system delivers improved flavour and longer lifespan than conventional round-wire coil designs at the same resistance.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe VPU tech mesh heats e-liquid evenly across a much wider heated surface area than a round-wire coil, producing faster, more efficient vaporisation with every draw. The result is a richer, more consistent, and more accurately flavoured vape from the first puff to the last — with the mesh's even heat distribution eliminating the localised hot spots that cause uneven flavour and premature coil failure in lesser designs. The extended lifespan of the VPU mesh construction means each Pod lasts meaningfully longer before the flavour starts to fade, giving you better ongoing value from every pack of three and fewer Pod changes over time.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBecause the VPU tech mesh coil is integrated directly into the Pod at the point of manufacture, every Pod swap automatically brings a fresh, factory-fresh coil with it — no separate coil purchases, no coil installations, and no maintenance of any kind. Swap the Pod when the flavour fades, and you're immediately back to clean, consistent performance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eColour-Coded by Resistance — Always Know Which Pod You're Reaching For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOne of the genuinely clever practical design touches of the Geekvape Q Series Pod range is the colour-coded resistance band on every Pod. This simple but brilliantly useful feature makes identifying your chosen resistance at a glance completely effortless:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed band\u003c\/strong\u003e — 0.4Ω (25–30W) — RDTL \/ Loose Draw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrange band\u003c\/strong\u003e — 0.6Ω (18–25W) — RDTL \/ Light RDL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYellow band\u003c\/strong\u003e — 0.8Ω (12–18W) — Loose MTL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreen band\u003c\/strong\u003e — 1.2Ω (8–12W) — Tight MTL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eWhether you're juggling different resistance options across different Q Series devices or simply keeping a stock of pods in your drawer, the colour coding means you never have to squint at the small print on the side of a Pod to find the right one. Reach for the right colour, click it in, and vape.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFour Resistance Options — Choosing the Right Q Series Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.4Ω Side Fill Pod (Red)\u003c\/strong\u003e — 25W–30W | RDTL | Loose Draw\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most powerful and vapour-forward Pod in the Q Series side fill range — a warm, open RDTL draw at 25–30W that produces the most vapour and the most intense flavour experience the Q platform can deliver. The 0.4Ω sits comfortably in RDTL territory — noticeably more open than the 0.6Ω and genuinely warmer and cloudier than any of the MTL options — with a draw that vapers coming from Pod mods or full-wattage devices will find immediately satisfying and rewarding.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 0.4Ω side-fill Pod is exclusively used in Geekvape's Wenax Q Pro, Wenax Q Ultra, Sonder Q2 and Q3 kits and is incompatible with other Wenax, Sonder, Hero, Digi, or AQ devices — please verify your device is one of those listed before ordering this resistance. Best with 50\/50 VG\/PG freebase e-liquids at 3mg–6mg or lower-strength nicotine salts at 6mg–10mg. High-strength 20mg nic salts are not recommended at 25–30W due to the increased vapour production. \u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω Side Fill Pod (Orange)\u003c\/strong\u003e — 18W–25W | RDTL \/ Light RDL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe versatile RDTL specialist of the Q Series side fill range — a warm, balanced draw that sits on the boundary between a light RDL and a slightly more open MTL, making it one of the most broadly popular options across the entire Q Pod ecosystem. At 18–25W, the 0.6Ω produces satisfying vapour and rich, accurate flavour, with the VPU tech mesh delivering the full character of your chosen e-liquid on every draw. A genuinely excellent all-day option for vapers who want more warmth and flavour presence than the tighter MTL options provide without stepping into the fuller RDTL intensity of the 0.4Ω.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 0.6Ω Pod is compatible with Aegis Hero Q, Sonder Q2, Wenax Q, Wenax Q Pro, Wenax Q Mini, Wenax Q Ultra, and Wenax Q2 only. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg strength.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.8Ω Side Fill Pod (Yellow)\u003c\/strong\u003e — 12W–18W | Loose MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most broadly compatible and accessible MTL Pod in the Q Series range — a warm, slightly loose MTL draw at 12–18W that delivers more airflow and vapour than the tighter 1.2Ω while remaining firmly in mouth-to-lung territory throughout. The 0.8Ω is a loose MTL draw — good for vapers coming from disposables who want a bit more air than a tight cigarette pull. The VPU tech mesh at 0.8ω delivers clean, accurate flavour and consistent saturation throughout the Pod's life—a reliable, comfortable everyday choice for most Q Series vapers using 20mg nicotine salt e-liquids who want just a touch more from their draw than the 1.2ω provides.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBest with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.2Ω Side Fill Pod (Green)\u003c\/strong\u003e — 8W–12W | Tight MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe tightest, coolest, and most cigarette-like draw in the Q Series side fill range — the 1.2Ω operates at just 8–12W and delivers the most restricted, most familiar MTL experience the Q platform can produce. The 1.2Ω is the tightest draw and runs at the lowest wattage — best with 10mg or 20mg nic salts. Minimal vapour output, a cool and focused draw, and an immediate, satisfying throat hit at 20mg nicotine salt strength — the go-to Pod for former smokers making the switch who want the draw that feels most natural from day one. The lowest operating wattage of any Q Series Pod also means the best battery economy — the device lasts significantly longer between charges at 8–12W than at the higher wattages of the RDTL options. \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBest with high-PG or 50\/50 VG\/PG nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHinged Silicone Side Fill — Clean, Quick, In-Device Refilling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe side-fill port sits on the side of the Pod — you don't need to take the Pod out of the kit to fill it. Find the silicone tab marked \"OPEN\" on the side of the Pod and push it aside to expose the fill port. Insert your 10ml nicotine salt bottle nozzle, fill to the maximum line, and push the silicone tab firmly back into place until it seals completely shut. The hinged silicone design keeps the tab attached to the Pod at all times—it cannot be lost or misplaced, and it creates an immediate, secure seal every time it closes. The whole refilling process takes five seconds without removing the Pod from the device—genuinely effortless and completely mess-free every time. \u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull-View Transparent Body — Monitor Your E-Liquid at a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Q Series side fill Pod features a clear, transparent PCTG body that lets you see your remaining e-liquid level at any time without removing the Pod from the device. When the visible level drops low, top up through the side fill port before the Pod runs dry — keeping the VPU tech mesh consistently saturated throughout the Pod's life is the single most important thing you can do to extend coil lifespan and maintain clean, accurate flavour right up to the point when the Pod needs replacing.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eLeak-Proof Construction — Pocket-Safe and Worry-Free\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Geekvape Q Series side fill Pod features a leak-resistant sealed construction that keeps e-liquid securely contained throughout the Pod's lifespan. The hinged silicone side-fill tab creates a tight, reliable seal every time it closes, and the sealed coil base prevents e-liquid from bypassing the VPU tech mesh and entering the airflow path. Whether the device is in your pocket, your bag, or lying on its side, the Q Series Pod keeps everything where it should be—no leaks, no gurgling, and no e-liquid on your hands.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full Geekvape Q Series Range\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGeekvape Q Series side-fill pods are compatible with the following Geekvape devices:\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω, 0.8Ω, and 1.2Ω side fill pods — compatible with:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGeekvape Wenax Q\u003c\/li\u003e\n\u003cli\u003eGeekvape Wenax Q Mini\u003c\/li\u003e\n\u003cli\u003eGeekvape Wenax Q Pro\u003c\/li\u003e\n\u003cli\u003eGeekvape Wenax Q Ultra\u003c\/li\u003e\n\u003cli\u003eGeekvape Wenax Q2\u003c\/li\u003e\n\u003cli\u003eGeekvape Sonder Q\u003c\/li\u003e\n\u003cli\u003eGeekvape Sonder Q Lite\u003c\/li\u003e\n\u003cli\u003eGeekvape Sonder Q2\u003c\/li\u003e\n\u003cli\u003eGeekvape Sonder Q3\u003c\/li\u003e\n\u003cli\u003eGeekvape Aegis Hero Q\u003c\/li\u003e\n\u003cli\u003eGeekvape Digi Q Vista\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.4Ω side fill Pod — compatible with (exclusively):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eGeekvape Wenax Q Pro\u003c\/li\u003e\n\u003cli\u003eGeekvape Wenax Q Ultra\u003c\/li\u003e\n\u003cli\u003eGeekvape Sonder Q2\u003c\/li\u003e\n\u003cli\u003eGeekvape Sonder Q3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e Any non-Q Series Geekvape device — including the Aegis Boost, Aegis Hero (non-Q), B Series devices, or any other Geekvape platform. Q Series side fill pods are also not interchangeable with Q Series top fill pods — both Pod formats use the same magnetic connection on Q Series devices, but the side-fill and top-fill Pod bodies are different products.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your Q Series Side Fill Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFitting a fresh Q Series side-fill Pod is a quick, clean, magnetic process. Remove the old Pod from the Q Series device by pulling it upwards from the magnetic connection. Before inserting the fresh Pod, fill it through the side-fill port — push the silicone tab aside, fill to the maximum line with your chosen e-liquid, and push the tab firmly back into place. Leave the Pod to sit for two to three minutes before your first draw on a fresh Pod to allow the VPU tech mesh to saturate with e-liquid fully. Push the filled Pod into the device's magnetic connection until it clicks firmly into place, start at the lower end of the recommended wattage range, and work upwards gradually over the first few draws. Never skip the priming wait — a dry first draw on a fresh Q Series Pod can compromise the mesh coil before it has a chance to deliver its full flavour potential.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Q Series Side Fill Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eGeekvape Q Series side fill pods typically last between one and two weeks of regular daily vaping, depending on resistance, wattage, e-liquid type, and usage frequency. The VPU tech mesh construction extends coil life meaningfully beyond conventional round-wire pods of similar resistance. The clearest sign a Pod needs replacing is a change in flavour — a flat, muted, or slightly burnt taste means the VPU mesh is spent. Reduced vapour production or a gurgling draw are secondary indicators. Keeping the Pod topped up at all times and never vaping on a near-empty Pod significantly extends coil lifespan. With three pods in every pack, a fresh replacement is always ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePod\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.4Ω (Red)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase\u003c\/td\u003e\n\u003ctd\u003e3mg–10mg freebase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6Ω (Orange)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg nic salt recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8Ω (Yellow)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.2Ω (Green)\u003c\/td\u003e\n\u003ctd\u003eHigh-PG or 50\/50 nic salts\u003c\/td\u003e\n\u003ctd\u003e20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with the 0.6Ω, 0.8Ω, and 1.2Ω Q Series side fill pods. High VG (70\/30+) can work in the lower resistances but may struggle to keep up in the 1.2Ω Pod — 50\/50 remains the optimum e-liquid choice across all four resistance options for consistent wicking and the cleanest possible flavour performance. \u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e3x 2ml refillable side-fill pods per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Capacity\u003c\/td\u003e\n\u003ctd\u003e2ml (UK TPD compliant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Material\u003c\/td\u003e\n\u003ctd\u003ePCTG — full-view transparent body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Technology\u003c\/td\u003e\n\u003ctd\u003eVPU tech integrated mesh coil — pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFill System\u003c\/td\u003e\n\u003ctd\u003eHinged silicone side-fill tab — marked \"OPEN\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Connection\u003c\/td\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeak Protection\u003c\/td\u003e\n\u003ctd\u003eSealed construction — leak-resistant throughout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour Coding\u003c\/td\u003e\n\u003ctd\u003eRed (0.4Ω) \/ Orange (0.6Ω) \/ Yellow (0.8Ω) \/ Green (1.2Ω)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.4Ω \/ 0.6Ω \/ 0.8Ω \/ 1.2Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.4Ω Red)\u003c\/td\u003e\n\u003ctd\u003e25W–30W — RDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.6Ω Orange)\u003c\/td\u003e\n\u003ctd\u003e18W–25W — RDTL \/ Light RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.8Ω Yellow)\u003c\/td\u003e\n\u003ctd\u003e12W–18W — Loose MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (1.2Ω Green)\u003c\/td\u003e\n\u003ctd\u003e8W–12W — Tight MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003eRDTL \/ Loose Draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003eRDTL \/ Light RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003eLoose MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (1.2Ω)\u003c\/td\u003e\n\u003ctd\u003eTight MTL \/ Cigarette-Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.4Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 freebase — 3mg–10mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 or nic salts — 10mg recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.8Ω\/1.2Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 and nic salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices (0.6Ω–1.2Ω)\u003c\/td\u003e\n\u003ctd\u003eWenax Q\/Mini\/Pro\/Ultra\/Q2, Sonder Q\/Lite\/Q2\/Q3, Aegis Hero Q, Digi Q Vista\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices (0.4Ω only)\u003c\/td\u003e\n\u003ctd\u003eWenax Q Pro, Wenax Q Ultra, Sonder Q2, Sonder Q3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eNon-Q Series Geekvape devices \/ B Series \/ Aegis Boost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD \/ TRPR compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e3x Geekvape Q Series Side Fill 2ml Refillable Pod Cartridges (resistance of choice — 0.4Ω, 0.6Ω, 0.8Ω, or 1.2Ω)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003e0.4Ω exclusively compatible with Wenax Q Pro, Wenax Q Ultra, Sonder Q2, and Sonder Q3 only. All other resistances are compatible across the wider Q Series range. Not compatible with non-Q Series Geekvape devices. Always prime before first use. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Geekvape","offers":[{"title":"0.6 Ohm XL","offer_id":57437829562743,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm XL","offer_id":57437829595511,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/Geekvape-Q-Pod-Side-Fill-Replacement-Pods.jpg?v=1788522885"}],"url":"https:\/\/www.qss-vape.co.uk\/collections\/coils-and-pods.oembed?page=3","provider":"qssvape","version":"1.0","type":"link"}