{"product_id":"oxva-nexlim-replacement-pod-cartridges","title":"OXVA NeXlim Replacement Pod Cartridges","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe OXVA NeXlim Replacement Pod Cartridges are the official replacement pods for the OXVA NeXlim, NeXlim 2, NeXlim 2 Mini, and NeXlim GO Pod kits — and they bring something genuinely different to the refillable Pod market. Where the Xlim V3 and EZ pods use a single mesh coil inside each Pod, the NeXlim pods use two. OXVA's UNITECH 2.0 dual mesh coil system fires two mesh strips simultaneously inside every Pod—doubling the heated surface area in contact with the e-liquid, dramatically increasing vapour production and flavour intensity, and extending coil lifespan far beyond what a single mesh Pod can achieve. OXVA rates the NeXlim Pod at 200% more flavour and 200% longer coil life than standard single mesh pods — and in practice, the difference is immediately and clearly noticeable from the first puff.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a convenient pack of three 2ml refillable pods and available in three resistance options — \u003cstrong\u003e0.6Ω (20–40W)\u003c\/strong\u003e, \u003cstrong\u003e0.8Ω (12–32W)\u003c\/strong\u003e, and \u003cstrong\u003e1.2Ω (10–25W)\u003c\/strong\u003e — the NeXlim pods cover the full range of vaping styles from a warm, vapour-forward RDTL draw right through to the tightest, most cigarette-like MTL experience the NeXlim platform can deliver. Every Pod features a clean top-fill silicone port, a five-layer leak-proof structure, and a transparent PCTG body — all backed by OXVA's MHRA-registered UK TPD compliance.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCritical compatibility note:\u003c\/strong\u003e NeXlim pods are designed exclusively for the OXVA NeXlim, NeXlim 2, NeXlim 2 Mini, and NeXlim GO Pod kits. They are \u003cstrong\u003enot\u003c\/strong\u003e compatible with any device in the OXVA Xlim series — including the Xlim Pro, Xlim Pro 2, Xlim Pro 3, Xlim SE, Xlim SQ, or any other Xlim variant. The NeXlim platform is a completely separate Pod system from the Xlim range, and the pods are not interchangeable in either direction.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eUNITECH 2.0 Dual Mesh Technology — Why Two Coils Are Better Than One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe defining feature that sets the NeXlim Pod apart from every other OXVA Pod — and from most refillable pods in the UK market — is its UNITECH 2.0 dual mesh coil system. Rather than a single mesh strip heating the e-liquid, the NeXlim Pod contains two separate mesh coil elements that fire together simultaneously inside the Pod body. This dual-firing approach delivers three immediate and meaningful advantages over single-mesh Pod designs.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eDouble the heated surface area:\u003c\/strong\u003e Two mesh strips in contact with the e-liquid means twice as much e-liquid is vaporised per draw compared to a single-mesh Pod of the same resistance. The result is denser, richer, more flavour-saturated vapour on every single puff. This fuller, more immersive flavour experience makes the NeXlim Pod the highest-performing refillable Pod in the entire OXVA range.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEven heat distribution:\u003c\/strong\u003e The dual mesh arrangement distributes heat more evenly across the wicking cotton than a single-point coil can — eliminating hot spots, preventing uneven cotton degradation, and ensuring consistent, accurate flavour from the first puff to the last before the Pod needs replacing.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eExtended coil lifespan:\u003c\/strong\u003e By sharing the heat load across two mesh elements rather than concentrating it through one, the dual mesh system significantly reduces thermal stress on each mesh strip — extending overall coil lifespan well beyond what a single-mesh Pod at the same resistance could sustain. OXVA rates the UNITECH 2.0 dual mesh at 200% longer coil life than standard single-mesh pods — and in everyday use, most NeXlim vapers report getting noticeably more refills from each Pod before the flavour starts to fade.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe dual mesh coil is wrapped in a five-layer cotton matrix that maximises e-liquid absorption and ensures consistent saturation of both mesh elements throughout the Pod's entire lifespan — keeping every puff smooth, rich, and flavour-accurate right up until it's time to swap.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFive-Layer Leak-Proof Structure — Genuinely Mess-Free\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOXVA's commitment to leak prevention in the NeXlim Pod goes well beyond a standard silicone seal — the NeXlim's 5-layer leak-proof structure combines five distinct protective measures that work together to keep e-liquid completely contained under virtually any circumstances.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe five layers include triple silicone seals at the key e-liquid containment points, a bottom-mounted coil design that positions the heating element below the e-liquid chamber rather than within the airflow path, a reinforced PCTG Pod structure that maintains its integrity under pressure, and a sealed top-fill port that stays firmly closed unless deliberately opened. Whether the device is in your pocket, your bag, or carried at an angle, the five-layer system provides leak resistance that makes everyday carry genuinely worry-free — no e-liquid on your hands, no stained pockets, and no gurgling draws caused by e-liquid bypassing the coil.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThree Resistance Options — Choosing the Right NeXlim Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω UNITECH 2.0 Dual Mesh Pod\u003c\/strong\u003e — 20W–40W | RDTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most open and vapour-forward option in the NeXlim range — a warm, versatile RDTL draw that delivers the most intense flavour experience and the highest cloud production the NeXlim platform can produce. At 20–40W with a wide operating range that suits the NeXlim kit's Boost and ECO modes, the 0.6Ω produces a noticeably bolder, fuller draw than the MTL options — denser vapour, warmer temperature, and the full impact of the dual mesh coil's doubled surface area at every puff. The wide wattage range of the 0.6Ω makes it the most versatile Pod in the NeXlim range — it performs well across ECO mode at the lower end for a more moderate experience. It opens up fully in Boost mode at the higher end for the most intense NeXlim performance possible.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBest with 50\/50 VG\/PG freebase e-liquids at 3mg–10mg strength or lower-strength nicotine salts. Vapers who prefer 20mg nic salts should stay at the lower end of the 0.6Ω's wattage range for a comfortable throat hit — the increased vapour production at higher wattages makes full-strength nic salts more intense than most vapers find comfortable.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.8Ω UNITECH 2.0 Dual Mesh Pod\u003c\/strong\u003e — 12W–32W | MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe versatile MTL option in the NeXlim range — a warm, satisfying mouth-to-lung draw across a wide wattage range that suits both ECO and Boost mode operation. The 0.8Ω delivers a noticeably warmer and more flavour-forward MTL experience than the 1.2Ω while remaining firmly in MTL territory throughout — a balanced, comfortable everyday draw that works brilliantly with 20mg nicotine salt e-liquids at moderate wattages and feels genuinely satisfying across extended vaping sessions. The dual mesh coil delivers noticeably richer flavour than a single-mesh 0.8Ω Pod could achieve — the extra heated surface area extracts more character from your chosen e-liquid with every single puff, making familiar nic salt flavours taste noticeably more vibrant and full-bodied.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBest with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1.2Ω UNITECH 2.0 Dual Mesh Pod\u003c\/strong\u003e — 10W–25W | Tight MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe tightest, coolest, and most cigarette-like draw in the NeXlim range — the 1.2Ω operates at a comfortable 10–25W and delivers the most restricted, most familiar MTL experience the platform can produce. The cool, focused draw and minimal vapour output make the 1.2Ω an immediately natural and comfortable choice for former smokers switching from cigarettes — familiar in character, satisfying at 20mg nic salt strength, and genuinely effortless to vape all day without any fatigue. Even at 1.2Ω, the dual mesh UNITECH 2.0 coil delivers a noticeable improvement in flavour clarity and richness over a single-mesh Pod of the same resistance — making the NeXlim 1.2Ω one of the most flavour-accurate tight MTL pods available in the UK at any price point.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eBest with high-PG or 50\/50 VG\/PG nicotine salt e-liquids at 20mg strength. The best battery economy of the three options — the 10–25W operating range means the NeXlim device battery lasts longest between charges when running the 1.2Ω.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTop-Fill Design — Quick, Clean, and In-Device Refilling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery NeXlim Pod refills through a top-fill silicone port that stays securely closed during vaping and everyday carry but opens easily and cleanly when you need to top up. Locate the silicone fill port at the top of the Pod, push it gently aside to expose the fill port, insert your chosen 10ml nicotine salt bottle nozzle, fill to the maximum line, and push the silicone seal firmly back into place. The whole process takes five seconds and can be done without removing the Pod from the NeXlim device at any point — a clean, intuitive refilling experience that causes no mess and carries no risk of e-liquid spilling down the side of the device. The transparent PCTG Pod body lets you monitor your e-liquid level at a glance so you can top up before the Pod runs low and maintain consistent coil saturation throughout.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The NeXlim Family Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOXVA NeXlim replacement pods are compatible with the following OXVA devices:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eOXVA NeXlim\u003c\/li\u003e\n\u003cli\u003eOXVA NeXlim 2\u003c\/li\u003e\n\u003cli\u003eOXVA NeXlim 2 Mini\u003c\/li\u003e\n\u003cli\u003eOXVA NeXlim GO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThese pods are not compatible with any OXVA Xlim device.\u003c\/strong\u003e The NeXlim uses a completely different Pod connection, coil platform, and Pod geometry than the entire Xlim series—the pods are not interchangeable. If you own an Xlim device, please see the Xlim V3 Top Fill pods or Xlim EZ cartridges at QSS Vape. If you own a NeXlim, VPrime, or any other OXVA device not listed above, please check its specific Pod compatibility before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your NeXlim Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFitting a fresh NeXlim Pod is a quick, clean, magnetic process. Remove the old Pod from the NeXlim device by pulling it upwards from the magnetic connection. Before fitting the fresh Pod, fill it through the top-fill silicone port — open the port, fill to the maximum line with your chosen nicotine salt or 50\/50 e-liquid, and seal the port firmly. Allow at least five to ten minutes for the dual UNITECH 2.0 mesh coils to fully saturate with e-liquid before inserting the Pod into the device — this priming step is especially important with the NeXlim's dual mesh construction, where both coil elements need to reach full saturation for the best possible first-draw flavour. Push the filled Pod into the NeXlim device's magnetic connection until it clicks firmly and securely into place, start at the lower end of the recommended wattage range, and work upwards gradually over the first few draws.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNever vape on an under-saturated NeXlim Pod — the dual mesh coil delivers outstanding performance when fully saturated, but a dry first draw on either mesh element can compromise the flavour quality of the Pod before it has a chance to deliver its full potential.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your NeXlim Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe UNITECH 2.0 dual mesh coil's extended lifespan — rated at 200% longer than standard single-mesh pods — means most NeXlim vapers report significantly more refills from each Pod before flavour quality starts to decline than they'd get from a standard single-mesh Pod of similar resistance. In everyday use, most vapers get between five and ten refills from each NeXlim Pod depending on resistance, wattage, e-liquid type, and usage frequency — typically translating to two to three weeks of daily vaping from a single Pod. Lower wattages and cleaner e-liquid profiles extend lifespan further; higher wattages and sweeter e-liquids shorten it. The clearest sign a Pod needs replacing is a change in flavour — a flat, muted, or slightly scorched taste means the dual mesh coil is spent. With three pods in every pack, a fresh replacement is always ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePod\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase or lower-strength nic salts\u003c\/td\u003e\n\u003ctd\u003e3mg–10mg (≤20mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase or nicotine salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1.2Ω\u003c\/td\u003e\n\u003ctd\u003eHigh-PG or 50\/50 VG\/PG nicotine salts\u003c\/td\u003e\n\u003ctd\u003e20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with all three NeXlim Pod resistances for a clean, accurate, and deeply satisfying vaping experience.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHigh-VG e-liquids of 60VG or above are not recommended for any NeXlim Pod — the integrated dual mesh coil is optimised for the thinner consistency of 50\/50 and nic salt formulas, and high-VG e-liquids will not wick efficiently through the dual mesh structure at these resistance levels, causing dry hits and significantly shortening Pod lifespan.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable style=\"width: 100%; height: 529.032px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth scope=\"col\" style=\"width: 28.0393%; height: 19.5938px;\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"width: 69.1288%; height: 19.5938px;\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003ePack Contents\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e3x 2ml refillable Pod cartridges per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003ePod Capacity\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e2ml (UK TPD compliant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003ePod Material\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003ePCTG — transparent body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 39.1875px;\"\u003eCoil Technology\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 39.1875px;\"\u003eUNITECH 2.0 — dual mesh coil (two mesh strips fire simultaneously)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eFlavour Improvement\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e200% more flavour vs standard single-mesh pods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 39.1875px;\"\u003eCoil Lifespan Improvement\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 39.1875px;\"\u003e200% longer lifespan vs standard single-mesh pods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eCoil Wrapping\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eFive-layer cotton matrix — maximised absorption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 39.1875px;\"\u003eLeak Protection\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 39.1875px;\"\u003e5-layer leak-proof structure — triple silicone seals + reinforced body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eFill System\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eTop-fill silicone port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003ePod Connection\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eResistance Options\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e0.6Ω \/ 0.8Ω \/ 1.2Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eWattage (0.6Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e20W–40W — RDTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eWattage (0.8Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e12W–32W — MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eWattage (1.2Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e10W–25W — Tight MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eVaping Style (0.6Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eRDTL \/ Warm MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eVaping Style (0.8Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eMTL (Mouth-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eVaping Style (1.2Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eTight MTL \/ Cigarette-Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eBest E-Liquid (0.6Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e50\/50 freebase — 3mg–10mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eBest E-Liquid (0.8Ω\/1.2Ω)\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003e50\/50 and nic salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eNot Recommended\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eHigh-VG e-liquids 60VG or above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eNeXlim \/ NeXlim 2 \/ NeXlim 2 Mini \/ NeXlim GO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eNot Compatible\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eAny OXVA Xlim device (Xlim Pro, Xlim SE, Xlim SQ, etc.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 28.0393%; height: 19.5938px;\"\u003eCompliance\u003c\/td\u003e\n\u003ctd style=\"width: 69.1288%; height: 19.5938px;\"\u003eUK TPD \/ TRPR compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e3x OXVA NeXlim UNITECH 2.0 Dual Mesh 2ml Refillable Pod Cartridges (resistance of choice — 0.6Ω, 0.8Ω, or 1.2Ω)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible with OXVA NeXlim, NeXlim 2, NeXlim 2 Mini, and NeXlim GO only. Not compatible with any OXVA Xlim device. Always prime before first use. High-VG e-liquids are not recommended. Devices and e-liquids are sold separately at QSS Vape.\u003c\/p\u003e","brand":"Oxva","offers":[{"title":"0.6 Ohm (XL)","offer_id":57437695672695,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm (XL)","offer_id":57437695705463,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 Ohm (XL)","offer_id":57437695738231,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/nexlim.webp?v=1788520273","url":"https:\/\/www.qss-vape.co.uk\/products\/oxva-nexlim-replacement-pod-cartridges","provider":"qssvape","version":"1.0","type":"link"}