{"product_id":"oxva-xlim-v3-top-fill-replacement-pods","title":"OXVA Xlim V3 Top Fill Replacement Pods","description":"\u003cp dir=\"ltr\"\u003eThe OXVA Xlim V3 Top Fill Replacement Pods are the official, latest-generation replacement pods for the entire OXVA Xlim device family — and they represent the most refined and capable iteration of the Xlim Pod platform to date. Built around OXVA's UniTech 2.0 mesh coil technology, featuring a genuinely convenient top-fill silicone port that lets you refill without ever removing the Pod from the device, and compatible with the full Xlim kit range without any adapters or modifications, the V3 pods are the natural, obvious choice for every Xlim user looking to keep their device performing at its absolute best.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAvailable at QSS Vape in two of the most popular resistance options — \u003cstrong\u003e0.6Ω\u003c\/strong\u003e for a warm, versatile RDTL draw and \u003cstrong\u003e0.8Ω\u003c\/strong\u003e for a smooth, satisfying MTL experience — sold in a convenient pack of three 2ml refillable pods per pack. Every Pod comes pre-installed with a UniTech 2.0 mesh coil that delivers 50% better flavour and 30% longer coil life than the V2 generation, a leak-resistant anti-drip construction, and a transparent PCTG body that lets you monitor your e-liquid level at a glance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eUniTech 2.0 Mesh Coil — The Key Upgrade Over V2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe single most important improvement in the Xlim V3 Pod over the previous V2 generation is the upgrade to OXVA's UniTech 2.0 mesh coil technology — and the performance difference is immediately and clearly noticeable in everyday use.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe UniTech 2.0 coil uses an advanced mesh structure that distributes heat significantly more evenly across the e-liquid wicking surface than the V2 coil could achieve — eliminating the localised hot spots that can cause uneven saturation and flavour inconsistency in lesser coil designs. The result is a 50% improvement in flavour production over the V2 baseline and a 30% extension in coil lifespan — both meaningful, real-world improvements that translate directly into a better-tasting vape that lasts longer before the Pod needs replacing.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe UniTech 2.0 coil is pre-installed in every V3 Pod at the point of manufacture — sealed cleanly inside the PCTG Pod body with no separate coil components to handle, no threading to risk cross-threading, and no replacement parts to source. When the flavour eventually fades, you replace the entire Pod — every new Pod in the pack includes a fresh UniTech 2.0 coil.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTwo Resistance Options — Choosing the Right Xlim V3 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.6Ω UniTech 2.0 Mesh Pod\u003c\/strong\u003e — 14W–25W | RDTL \/ Light RDL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 0.6Ω is the more versatile and vapour-forward of the two options stocked at QSS Vape. This warm, slightly open draw sits at the boundary between loose MTL and light RDTL, making it one of the most popular pods across the Xlim range. At 14–25W, the 0.6Ω produces noticeably more warmth and vapour than the 0.8Ω — a fuller, more flavour-intense draw that extracts more character from your chosen e-liquid on every single puff. The UniTech 2.0 mesh at 0.6Ω delivers a genuinely impressive flavour profile — particularly on fruit and menthol nicotine salt e-liquids where the even heat distribution renders every nuance of the flavour with clarity and accuracy.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe 0.6Ω is the Pod to choose if you want a warmer, more rewarding draw than a tight MTL pull provides, or if you've been vaping the 0.8Ω and want to step up to something with more presence and intensity without moving to a full sub-ohm tank setup. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg strength — Ecigone and OXVA specifically advise against 20mg nicotine salts in the 0.6Ω at higher wattages due to the increased vapour production. If you vape 20mg nic salts, stick to the lower end of the 0.6Ω wattage range or consider the 0.8Ω instead.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e0.8Ω UniTech 2.0 Mesh Pod\u003c\/strong\u003e — 12W–16W | MTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe tighter, cooler, and more MTL-focused of the two options — the 0.8Ω delivers a smooth, focused mouth-to-lung draw at a comfortable 12–16W that's a natural, immediately familiar choice for former smokers making the switch or for vapers who prefer the most cigarette-like experience the Xlim platform can offer. The draw is noticeably more restricted than the 0.6Ω — cooler, more focused, and producing less vapour — with a clean, accurate flavour profile and a satisfying throat hit at 20mg nicotine salt strength that hits quickly and smoothly without any harshness.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe UniTech 2.0 mesh at 0.8Ω delivers the same 50% flavour improvement over the V2 generation in MTL territory — so vapers who've been running the previous Xlim Pod generation will immediately notice the step up in flavour clarity and accuracy from the first puff. A critical note from OXVA and leading Xlim retailers: \u003cstrong\u003enever run the 0.8Ω above 20W\u003c\/strong\u003e — anything above that wattage at 0.8Ω burns the coil out quickly. Keep the wattage between 12W and 16W for the best flavour and the longest possible Pod lifespan. Best with 50\/50 VG\/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength. High-VG e-liquids of 70VG or above are not suitable for the 0.8Ω Pod — the thicker consistency does not wick efficiently at this resistance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTop Fill Without Removing the Pod — Genuinely Convenient\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Xlim V3 Pod's top-fill design is one of the most practical refilling experiences available from any Pod kit in the UK. The silicone fill port sits at the top of the Pod — push the silicone plug aside with your fingertip to expose the fill port, insert the nozzle of your 10ml nicotine salt bottle or dropper, fill to the maximum line, and push the plug firmly back into place. The whole process takes five seconds and can be done without removing the Pod from the device. The silicone plug creates a secure, tight seal when you close it — no e-liquid finds its way back through the fill port during vaping or everyday carry—clean, fast, and genuinely effortless every time.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eAnti-Leak Construction — Pocket-Safe and Mess-Free\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eEvery Xlim V3 Pod features OXVA's integrated anti-leak construction — a combination of the sealed silicone top-fill port, the tightly sealed coil base, and the PCTG Pod body's precision manufacturing that minimises condensation and prevents e-liquid spillage during everyday carry. The magnetic Pod connection to the Xlim device creates a secure, firm fit that holds the Pod confidently in place during use while still releasing cleanly and easily when you pull the Pod from the device. Whether the device is in your pocket on its side or rattling around in a bag, the anti-leak construction keeps e-liquid exactly where it should be.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTransparent Pod Body — Always Know Your E-Liquid Level\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe clear PCTG Pod body gives you a visible e-liquid level indicator at all times — glance at the Pod on your device to see exactly how much e-liquid remains without removing anything. When the level drops low, top up through the silicone fill port. Keeping the Pod topped up and never vaping on a near-empty Pod is the most important thing you can do to extend the lifespan of the UniTech 2.0 coil and maintain clean, consistent flavour from the first fill to the last.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full Xlim Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOXVA Xlim V3 Top Fill pods are compatible with the following OXVA devices:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eOXVA Xlim (original)\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SE\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SE 2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim V2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim Pro\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim Pro 2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim Pro 3\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SQ Pro\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim SQ Pro 2\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim GO\u003c\/li\u003e\n\u003cli\u003eOXVA Xlim 3 Ultra\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e OXVA Xlim V3 pods are \u003cstrong\u003enot\u003c\/strong\u003e compatible with the following OXVA devices — these use a completely different Pod platform:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eOXVA Xlim C — uses its own specific Pod format\u003c\/li\u003e\n\u003cli\u003eOXVA NeXlim — uses dedicated NeXlim pods only\u003c\/li\u003e\n\u003cli\u003eOXVA VPrime — uses dedicated VPrime pods only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eIf you own any of the above devices, check the product page for the correct replacement pods at QSS Vape before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your Xlim V3 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFitting a fresh Xlim V3 Pod takes seconds. Remove the old Pod from the device by pulling it cleanly downwards from the magnetic connection. Before inserting the fresh Pod, fill it through the top-fill port — push the silicone plug aside, fill to the maximum line with your chosen e-liquid, and push the plug firmly back into place. Allow at least five minutes for the UniTech 2.0 mesh coil to fully saturate before inserting the Pod into the device — this priming step is critical to ensure clean flavour and prevent a dry hit on the first draw. Push the filled Pod into the device's magnetic connection until it clicks firmly into place, then start vaping at the lower end of the recommended wattage range.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNever skip the priming time — the UniTech 2.0 mesh delivers exceptional flavour when properly saturated. Still, an under-primed coil on the first draw can permanently compromise the Pod's flavour before it can perform at its full potential.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your Xlim V3 Pod\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe UniTech 2.0 coil lasts 30% longer than the V2 generation, so most Xlim V3 Pod users get between five and eight refills from each Pod before the flavour starts to decline — roughly one to two weeks of daily vaping, depending on usage frequency and e-liquid choice. Sweeter e-liquids shorten Pod life; cleaner profiles extend it. The clearest sign a Pod needs replacing is a change in flavour — a flat, muted, or slightly burnt taste means the UniTech 2.0 coil has reached the end of its life. With three pods in every pack, a fresh replacement is always ready.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePod\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.6Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg nic salt recommended (≤20mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e0.8Ω\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG freebase or nic salts\u003c\/td\u003e\n\u003ctd\u003e10mg–20mg nic salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with both the 0.6Ω and 0.8Ω Xlim V3 pods for a clean, accurate, and deeply satisfying MTL and RDTL vaping experience.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHigh-VG e-liquids of 70VG or above are not suitable for either Pod option — the thicker consistency does not wick efficiently through the UniTech 2.0 coil at these resistance levels and wattages. For high-VG shortfill vaping, a sub-ohm tank setup is the recommended alternative.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e3x 2ml refillable pods per pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Capacity\u003c\/td\u003e\n\u003ctd\u003e2ml (UK TPD compliant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Construction\u003c\/td\u003e\n\u003ctd\u003ePCTG — transparent body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Technology\u003c\/td\u003e\n\u003ctd\u003eUniTech 2.0 mesh — pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlavour Improvement\u003c\/td\u003e\n\u003ctd\u003e50% better than V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Lifespan Improvement\u003c\/td\u003e\n\u003ctd\u003e30% longer than V2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003e0.6Ω \/ 0.8Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e14W–25W (RDTL \/ Light RDL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e12W–16W (MTL — do not exceed 20W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003eRDTL \/ Warm MTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003eMTL (Mouth-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFill System\u003c\/td\u003e\n\u003ctd\u003eTop-fill silicone port — refill without removing the Pod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePod Connection\u003c\/td\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeak Protection\u003c\/td\u003e\n\u003ctd\u003eAnti-leak construction — sealed silicone port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.6Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nic salts — 10mg recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest E-Liquid (0.8Ω)\u003c\/td\u003e\n\u003ctd\u003e50\/50 VG\/PG and nic salts — 10mg–20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eHigh-VG e-liquids 70VG or above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eXlim, Xlim SE\/SE2, Xlim V2, Xlim Pro\/Pro2\/Pro3, Xlim SQ Pro\/SQ Pro2, Xlim GO, Xlim 3 Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eXlim C \/ NeXlim \/ VPrime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD \/ TRPR compliant, MHRA registered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e3x OXVA Xlim V3 Top Fill 2ml Refillable Pods (0.6Ω or 0.8Ω — option of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eCompatible with the OXVA Xlim series only — not compatible with the Xlim C, NeXlim, or VPrime devices. Do not run the 0.8Ω above 20W. Always prime before first use. Devices and e-liquid sold separately at QSS Vape.\u003c\/p\u003e","brand":"Oxva","offers":[{"title":"0.6 Ohm","offer_id":57436455076215,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm","offer_id":57436455108983,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.6 Ohm 3ml","offer_id":57436455141751,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 Ohm 3ml","offer_id":57436455174519,"sku":null,"price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/oxva-xlim-pro-pods-top-fill-3-pack.webp?v=1788452633","url":"https:\/\/www.qss-vape.co.uk\/products\/oxva-xlim-v3-top-fill-replacement-pods","provider":"qssvape","version":"1.0","type":"link"}