{"product_id":"voopoo-tpp-dm-replacement-coils","title":"Voopoo TPP DM Replacement Coils","description":"\u003cp dir=\"ltr\"\u003eThe Voopoo TPP DM Replacement Coils are genuine, official replacement coils for the Voopoo TPP Pod Tank platform—one of the most capable and widely used high-wattage sub-ohm tank systems in the UK vaping market. TPP stands for Tank Pod Platform — and the DM coil range that powers it represents Voopoo's most advanced and performance-focused coil technology outside of the PnP X system, designed specifically for experienced DTL vapers who want maximum cloud production, bold and precise flavour, and the kind of consistent high-wattage performance that lesser coil platforms cannot sustain.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSold in a convenient pack of three and available in four resistance options — \u003cstrong\u003eDM1 0.15Ω (60–80W)\u003c\/strong\u003e, \u003cstrong\u003eDM2 0.2Ω (40–60W)\u003c\/strong\u003e, \u003cstrong\u003eDM3 0.15Ω (80–100W)\u003c\/strong\u003e, and \u003cstrong\u003eDM4 0.3Ω (32–40W)\u003c\/strong\u003e — the TPP DM range covers the full spectrum of DTL vaping from warm, flavour-focused restricted draws at 32–40W all the way up to extreme, cloud-chasing performance at 80–100W. Every coil in the TPP DM range uses Voopoo's patented mesh coil technology with organic cotton wicking, a press-fit installation system that makes coil changes fast and tool-free, and a construction built to sustain the heat load of high-wattage sub-ohm vaping with far greater consistency and longevity than conventional round-wire coil designs.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePatented TPP Coil Technology — Built for Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe TPP DM coils use Voopoo's patented coil technology — a specifically engineered mesh coil construction that increases the atomisation area inside the coil head and improves heating speed over conventional coil designs. By expanding the heated surface area within the coil housing, each puff contacts and vaporises a larger volume of e-liquid simultaneously — producing denser, more saturated vapour with richer, more full-bodied flavour than a smaller-surface coil of the same resistance could achieve at equivalent wattages.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eFaster heat-up times mean the vapour reaches full temperature more quickly on every draw — reducing the cool, thin pull that can occur at the start of each puff with slower-ramping coils and delivering a consistently warm, dense, full-flavour hit from the very first inhale. The organic cotton wicking is specifically matched to the mesh element's heat profile, absorbing e-liquid efficiently at the wicking rates required by high-wattage DTL vaping while maintaining even saturation throughout the coil's lifespan.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe press-fit installation system makes coil changes completely tool-free — pull the old coil out and press the fresh primed coil into place until it clicks firmly and securely into the Pod. No threading, no screwing, no alignment required. The whole process takes under thirty seconds every time.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFour DM Coil Options — Choosing the Right TPP Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTPP DM1 0.15Ω Mesh Coil\u003c\/strong\u003e — 60W–80W | Best: 65W–75W | Full DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most popular and widely used coil in the entire TPP DM range — the DM1 is the go-to option for vapers who want an outstanding combination of rich flavour and impressive cloud production at a wattage range that most capable box mods handle comfortably. At 60–80W, with a sweet spot of 65–75W, the DM1 delivers a wide, open DTL draw with warm, dense vapour and a bold, full-bodied flavour profile that showcases the character of high-VG shortfill e-liquids at their best. The DM1 is the natural starting point for vapers new to the TPP platform who want to explore what it can do—consistent, satisfying, and deeply impressive from the first puff. Requires a device that can comfortably sustain 60W. Best with 70VG\/30PG or higher shortfill e-liquids at 3mg freebase strength. Voopoo recommend ≤10mg nicotine strength for all DTL coils.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTPP DM2 0.2Ω Mesh Coil\u003c\/strong\u003e — 40W–60W | Best: 50W–55W | DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eA slightly higher resistance than the DM1, delivering a warm, satisfying DTL experience at a more moderate 40–60W that broadens compatibility across a wider range of devices while still producing excellent cloud and flavour output. The DM2 draws slightly less power than the DM1 at its best wattage, meaning better battery economy and a marginally cooler draw—a difference some experienced vapers prefer for extended all-day DTL sessions, where the DM1's heat intensity can become fatiguing over time. The DM2 is an excellent all-day alternative to the DM1 for vapers who want strong TPP performance with slightly gentler battery consumption. Best with 70VG\/30PG or higher shortfill e-liquids at 3mg freebase strength. Voopoo recommend ≤10mg nicotine strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTPP DM3 0.15Ω Mesh Coil\u003c\/strong\u003e — 80W–100W | Best: 85W–95W | Extreme DTL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most powerful coil in the entire TPP DM range — the DM3 is an enthusiast-level, extreme DTL coil that operates at 80–100W and delivers the most intense, cloud-forward, high-wattage vaping experience the TPP platform can produce. Despite sharing the same 0.15Ω resistance as the DM1, the DM3 is a completely different coil — engineered specifically for sustained high-wattage operation at 80–100W with a mesh construction that handles the extreme heat load of these wattages without the performance degradation that would cause premature coil failure in lesser designs. The cloud production and flavour intensity at 85–95W is genuinely striking — dense, warm, and deeply satisfying in a way that only high-wattage mesh coils can deliver. The DM3 requires a device that can sustain 80W or above — not every box mod will be suitable. Always check your device's maximum rated continuous output before selecting the DM3. Best with 70VG\/30PG or higher shortfill e-liquids at 3mg freebase strength. Voopoo recommend ≤10mg nicotine strength.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTPP DM4 0.3Ω Mesh Coil\u003c\/strong\u003e — 32W–40W | Half DTL \/ RDL\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe most accessible and versatile coil in the TPP DM range — the DM4 operates at a comfortable 32–40W and delivers a warm, flavour-forward half-DTL draw that sits right on the boundary between a tight restricted DTL and a relaxed RDL experience. The 0.3Ω resistance makes the DM4 the most battery-friendly coil in the range by a significant margin — delivering excellent flavour and satisfying vapour at a wattage that extends device runtime considerably compared to the DM1, DM2, and DM3 options. The DM4 is an outstanding all-day coil choice for vapers who want genuine TPP flavour quality without committing to the full high-wattage DTL intensity of the other options — and a natural starting point for vapers transitioning from a Pod kit to a full sub-ohm TPP setup for the first time. Works well with both high-VG shortfills and 50\/50 freebase e-liquids at lower nicotine strengths. Best with 70VG\/30PG shortfills or 50\/50 freebase at 3mg–6mg freebase. Voopoo recommend ≤10mg nicotine strength.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatible Devices — The Full TPP Platform\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eVoopoo TPP DM coils are compatible with the following Voopoo devices and tanks running the TPP coil platform:\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eKits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVoopoo Drag 3\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag X Plus\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag X Plus Professional Edition\u003c\/li\u003e\n\u003cli\u003eVoopoo Drag 4 \u003cem\u003e(with TPP Pod Tank)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoopoo Argus GT 2 \u003cem\u003e(with TPP Pod Tank)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eTanks:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eVoopoo TPP Pod Tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e TPP DM coils are designed exclusively for devices running the Voopoo TPP Pod Tank or TPP coil platform. They are \u003cstrong\u003enot\u003c\/strong\u003e compatible with any of the following Voopoo coil families:\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eStandard PnP coils (VM, TW, TM series) — different coil platform\u003c\/li\u003e\n\u003cli\u003ePnP X coils — different coil platform\u003c\/li\u003e\n\u003cli\u003eITO coils — different coil platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003ePlease check your device carefully before ordering to ensure it is compatible with the TPP coil platform. If your device uses the standard PnP system, you need PnP coils — available separately at QSS Vape. If it uses the PnP X system, you need PnP X coils — also available at QSS Vape.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHow to Install and Prime Your TPP DM Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTPP DM coils use a press-fit installation system — one of the most straightforward coil-change processes available. Remove the TPP Pod tank or Pod from your device, locate the coil slot at the base of the Pod, and pull the old coil straight out. Before fitting the fresh coil, prime it thoroughly by dripping three to five drops of your high-VG shortfill or freebase e-liquid directly onto the exposed organic cotton wicking visible through the coil's wicking ports. Allow three to five minutes for the e-liquid to fully saturate the cotton. This step is critical at the high wattages TPP coils operate at, where an under-saturated cotton wick can burn on the first draw and permanently compromise the coil's flavour before it reaches peak performance. Press the primed coil firmly into the coil seat until it clicks securely into place. Fill the tank with e-liquid, start at the lower end of the recommended wattage range, and gradually work up over your first few draws.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhen to Change Your TPP DM Coil\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eTPP DM coils typically last between one and two weeks of regular daily high-wattage vaping depending on chosen wattage, e-liquid type, and frequency. Higher wattages (DM3 at 80–100W) and sweeter e-liquids will naturally shorten coil life, while more moderate wattages (DM4 at 32–40W) and cleaner e-liquid profiles extend it. The most reliable sign a TPP DM coil needs replacing is a change in flavour — a flat, muted, or scorched taste indicates the organic cotton is spent. Reduced vapour output or a darkened e-liquid discolouration in the tank are secondary indicators. With three coils per pack, a fresh replacement is always ready when you need it.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eE-Liquid Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCoil\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest E-Liquid\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eNicotine Strength\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDM1 0.15Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDM2 0.2Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDM3 0.15Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills\u003c\/td\u003e\n\u003ctd\u003e3mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDM4 0.3Ω\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG shortfills or 50\/50 freebase\u003c\/td\u003e\n\u003ctd\u003e3mg–6mg freebase (≤10mg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003eAll TPP DM coils are designed for high-VG e-liquids of 70% VG or higher for optimal wicking, saturation, and cloud production at their respective wattage ranges. The full range of 100ml 70VG\/30PG shortfills at QSS Vape — including the Lancashire Creamery, Future Juice, Wild Roots, Mix Labs, and Just Juice shortfill ranges — pairs brilliantly with every TPP DM coil option and delivers outstanding results at the wattages these coils operate at.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eNicotine salts and high-strength freebase e-liquids are not recommended for any TPP DM coil — the high-power DTL wattage ranges produce uncomfortably harsh throat hits with concentrated nicotine formulas. Voopoo officially recommend a maximum of 10mg nicotine strength across the full TPP DM range. You can use 50\/50 e-liquids with the DM4 at lower wattage, but high-VG remains the recommended pairing for all four coil options.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eFull Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"ltr\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eSpec\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack Contents\u003c\/td\u003e\n\u003ctd\u003e3x TPP DM replacement coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoil Technology\u003c\/td\u003e\n\u003ctd\u003ePatented TPP mesh — increased atomisation area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWicking Material\u003c\/td\u003e\n\u003ctd\u003eOrganic cotton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePress-fit — no tools, no threading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance Options\u003c\/td\u003e\n\u003ctd\u003eDM1 0.15Ω \/ DM2 0.2Ω \/ DM3 0.15Ω \/ DM4 0.3Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (DM1 0.15Ω)\u003c\/td\u003e\n\u003ctd\u003e60W–80W (best: 65W–75W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (DM2 0.2Ω)\u003c\/td\u003e\n\u003ctd\u003e40W–60W (best: 50W–55W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (DM3 0.15Ω)\u003c\/td\u003e\n\u003ctd\u003e80W–100W (best: 85W–95W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWattage (DM4 0.3Ω)\u003c\/td\u003e\n\u003ctd\u003e32W–40W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (DM1\/DM2\/DM3)\u003c\/td\u003e\n\u003ctd\u003eFull DTL (Direct-to-Lung)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVaping Style (DM4)\u003c\/td\u003e\n\u003ctd\u003eHalf DTL \/ RDL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended E-Liquid\u003c\/td\u003e\n\u003ctd\u003e70VG\/30PG or higher shortfills (all options)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDM4 Alternative\u003c\/td\u003e\n\u003ctd\u003e50\/50 freebase also compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Nicotine\u003c\/td\u003e\n\u003ctd\u003e≤10mg (Voopoo official recommendation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Recommended\u003c\/td\u003e\n\u003ctd\u003eNicotine salts above 10mg \/ 50\/50 at 20mg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Devices\u003c\/td\u003e\n\u003ctd\u003eDrag 3, Drag X Plus, Drag 4 (with TPP tank), Argus GT 2 (with TPP tank), TPP Pod Tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot Compatible\u003c\/td\u003e\n\u003ctd\u003eStandard PnP (VM\/TW\/TM) \/ PnP X \/ ITO coil platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eUK TPD compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat's in the Pack?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e3x Voopoo TPP DM Replacement Coils (DM1, DM2, DM3, or DM4 — option of choice)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cem\u003eCompatible only with the Voopoo TPP Pod Tank and TPP-compatible devices. Not compatible with standard PnP, PnP X, or ITO coil platforms. Always verify your device's maximum wattage before selecting DM3. Devices and e-liquid sold separately at QSS Vape.\u003c\/em\u003e\u003c\/p\u003e","brand":"Voopoo","offers":[{"title":"DM1 0.15 Ohm","offer_id":57435603206519,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true},{"title":"DM2 0.2 Ohm","offer_id":57435603239287,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true},{"title":"DM3 0.15 Ohm","offer_id":57435603272055,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0524\/6091\/2839\/files\/dm1.jpg?v=1788434966","url":"https:\/\/www.qss-vape.co.uk\/products\/voopoo-tpp-dm-replacement-coils","provider":"qssvape","version":"1.0","type":"link"}