Vaporesso GTX Replacement Coils

The Vaporesso GTX Replacement Coils are the genuine, official replacement coils for one of the most versatile and widely used coil platforms in the Vaporesso range — covering an extensive list of Vaporesso Pod kits, AIO devices, and tanks in a single unified coil family. GTX powers everything from compact everyday Pod kits to capable sub-ohm box mod setups, with a resistance range spanning tight MTL nic salt vaping to full DTL cloud chasing — all in the same push-fit coil format.

Available at QSS Vape in two carefully selected options — the GTX 0.8Ω Mesh Coil (12–20W) and the GTX 0.2Ω Mesh Coil (45–60W) — these two coils cover the most popular ends of the GTX platform's performance range: a smooth, flavourful MTL draw for nicotine salt vapers on one end, and a warm, cloud-forward sub-ohm DTL experience on the other. Sold in a pack of five, every GTX coil uses Vaporesso's COREX Morph-Mesh technology with Cumulus cotton wicking for up to 50% better flavour production and a significantly longer coil lifespan than conventional round-wire coil designs.

COREX Technology — What Makes the GTX Coil Different

Every Vaporesso GTX coil — across both the 0.8Ω and 0.2Ω options — is built around Vaporesso's COREX heating technology, combining two key innovations that work together to deliver better flavour and longer coil life than a standard mesh coil of the same resistance meaningfully.

Morph-Mesh Structure: The COREX coil uses a graduated Morph-Mesh design — rather than a uniform flat mesh grid, the mesh density and spacing vary across the coil's heating surface to optimise heat distribution for each specific resistance level. More even heating means no hotspots, no uneven e-liquid consumption, and no localised burning of the cotton — the result is a coil that delivers consistent, accurate flavour from the very first puff right through to the end of its lifespan, and a Vaporesso claim of up to 50% better flavour production compared to conventional coil designs.

Cumulus Cotton Wicking: COREX pairs the Morph-Mesh with Vaporesso's Cumulus cotton — a specially selected and processed cotton that absorbs e-liquid more efficiently than standard organic cotton, holds more e-liquid within the wicking structure at any given time, and resists the compression and degradation that ordinary cotton suffers over repeated heat cycles. The Cumulus cotton's superior saturation capacity is the key reason GTX coils last longer than many competing coil designs—it keeps the mesh consistently and evenly saturated throughout the coil's life, preventing the dry spots and uneven saturation that cause premature coil failure and burnt taste in lesser designs.

Two Coil Options — Choosing the Right GTX Coil

GTX 0.8Ω Mesh Coil — 12W–20W | MTL / Warm MTL

The MTL specialist of the two GTX options stocked at QSS Vape — and one of the most satisfying and consistently popular coils across the entire GTX platform. The 0.8Ω operates at just 12–20W and delivers a warm, flavourful mouth-to-lung draw that sits between a tight cigarette-style MTL and a slightly looser, warmer RDL-leaning experience — making it a brilliant choice for vapers who want a little more warmth and flavour density than a 1.2Ω coil provides without stepping into sub-ohm territory.

The GTX 0.8Ω features a restrictive airflow design at the base of the coil that channels airflow more tightly around the COREX mesh element — concentrating the vapour and delivering a warm, focused draw that feels genuinely satisfying with nicotine salt e-liquids at 10mg or 20mg strength. The COREX Morph-Mesh keeps flavour consistent and accurate throughout the coil's life, and the Cumulus cotton wicks 50/50 and nic salt formulas efficiently at this resistance without flooding or gurgling.

The 0.8Ω is the ideal coil for vapers running Vaporesso Pod kits and AIO devices who primarily vape 20mg nicotine salts and want a warmer, more flavour-forward draw than a tight 1.2Ω pull provides — while still retaining the compact, discreet, cigarette-style character that makes MTL vaping so satisfying. Best with 50/50 VG/PG freebase and nicotine salt e-liquids at 10mg or 20mg strength. All 10ml nicotine salt e-liquids at QSS Vape pair perfectly with the GTX 0.8Ω.

GTX 0.2Ω Mesh Coil — 45W–60W | DTL / Sub-Ohm

The sub-ohm powerhouse of the two GTX options — a full DTL mesh coil that operates at 45–60W and delivers warm, dense vapour, rich cloud production, and an open, unrestricted direct-to-lung draw that showcases the COREX Morph-Mesh's flavour performance at its very best. The 0.2Ω is the coil for vapers who want serious sub-ohm performance from a GTX-compatible device — whether that's a capable Vaporesso Pod mod, a full box mod with the GTX Tank, or any other GTX-compatible kit with sufficient wattage output.

The wider airflow channels of the 0.2Ω coil deliver a substantially more open, unrestricted draw than the 0.8Ω — warm, cloud-forward, and deeply satisfying from the very first inhale. The COREX Morph-Mesh at this resistance heats e-liquid across a wide, even surface area, maximising vapour production and delivering a bold, full-bodied flavour profile that high-VG shortfills are perfectly designed to complement. The Cumulus cotton handles the faster wicking demand of 45–60W vaping with impressive efficiency, maintaining consistent saturation throughout the coil's lifespan without flooding.

Requires a device capable of sustaining 45W comfortably at minimum — always check your device's maximum rated wattage before selecting the 0.2Ω. Best with high-VG e-liquids (60% VG or higher). Works brilliantly with the full range of 70VG/30PG shortfills available at QSS Vape at 3mg freebase strength. Not recommended with 20mg nicotine salts — the vapour production at 45–60W makes high-strength nic salts uncomfortably harsh.

Compatible Devices — The GTX Platform

Both the GTX 0.8Ω and 0.2Ω coils are compatible with the following Vaporesso devices — though it is critical to check individual device-specific compatibility notes below before ordering, as not every GTX device is compatible with every GTX resistance:

Pod Kits & AIO Devices:

• Vaporesso XROS Pro 2 (0.8Ω recommended)
• Vaporesso GTX One / GTX One Pro (0.8Ω — not compatible with 0.2Ω)
• Vaporesso GTX Go 40 / GTX Go 80 (0.8Ω for Go 40 — check max wattage before 0.2Ω)
• Vaporesso Target PM80 / PM80 SE (both compatible — check wattage)
• Vaporesso Target PM30 (0.8Ω recommended — 0.2Ω requires 45W+ output)
• Vaporesso SWAG PX80
• Vaporesso Luxe X / Luxe X Pro
• Vaporesso Luxe XR / Luxe XR Max
• Vaporesso Luxe 80 / Luxe 80S
• Vaporesso Gen Nano 80W
• Vaporesso XIRON Pod
• Vaporesso PM40 (0.8Ω only — PM40 is not compatible with the 0.2Ω)

Tanks:

• Vaporesso GTX Tank 18 (0.8Ω only — GTX Tank 18 is not compatible with 0.15Ω, 0.2Ω, or 0.3Ω options)
• Vaporesso GTX Tank 22
• Vaporesso XTank T (both 0.8Ω and 0.2Ω compatible — see XTank T product page for full coil guide)

Important compatibility notes:

• The GTX 0.2Ω requires a device capable of sustaining at least 45W — lower-wattage Pod devices including the GTX One, GTX Tank 18, GTX Go 40, and PM40 are not compatible with the 0.2Ω
• The GTX 0.8Ω is compatible across the widest range of GTX devices — if you are unsure which coil your device supports, the 0.8Ω is the safer starting choice for most compact GTX Pod kits
• GTX coils use a push-fit installation system on Pod devices and a screw-fit installation on tank versions — installation method varies by device
• GTX coils are not compatible with Vaporesso's GT, NRG, or EUC coil platforms — please verify your device is on the GTX platform before ordering

How to Install and Prime Your GTX Coil

GTX coil installation varies slightly depending on whether your device uses a Pod or tank format — but the priming process is the same for both.

Pod devices: Remove the Pod from the device, locate the coil slot at the base of the Pod, and pull the old coil straight out. Prime the fresh coil by applying two to three drops of e-liquid onto the exposed Cumulus cotton wicking visible through the coil's ports. Let it soak for three to five minutes, then push the primed coil firmly into the Pod until it clicks securely into place. Fill with e-liquid and vape.

Tank devices (GTX Tank / XTank T): Unscrew the tank base, remove the old coil by unscrewing it anticlockwise, prime the fresh coil as above, then screw the new coil into the base clockwise until it seats firmly without over-tightening. Reattach the base and fill.

In both cases, always start at the lower end of the recommended wattage range and work up gradually over the first few draws — this beds the Cumulus cotton properly and gives it time to reach full saturation before you apply the full heat load, extending coil life significantly.

When to Change Your GTX Coil

GTX coils are consistently praised for their longevity — the Cumulus cotton's superior saturation capacity means they typically outlast conventional cotton coils of similar resistance by a meaningful margin. Most vapers report one to two weeks from the 0.8Ω under moderate daily use, and a similar lifespan from the 0.2Ω at its higher wattage. The clearest sign a GTX coil needs replacing is a change in flavour — a flat, muted, or slightly burnt taste means the Cumulus cotton is spent. Reduced vapour production and a gurgling sound during draws are secondary indicators. With five coils in every pack, a fresh replacement is always ready.

E-Liquid Compatibility

All 10ml nicotine salt e-liquids at QSS Vape — including the full Elux Salt, Crystal Salt, Just Juice Bar, Pixl, OXVA OX Passion, and Riot X nic salt ranges — pair perfectly with the GTX 0.8Ω coil. The full range of 100ml 70VG/30PG shortfills at QSS Vape pairs brilliantly with the GTX 0.2Ω for outstanding DTL performance.

High-VG e-liquids of 70VG or above are not recommended with the 0.8Ω — the thicker consistency does not wick efficiently at this resistance and will result in dry hits. High-strength nicotine salts at 20mg are not recommended with the 0.2Ω — the vapour production at 45–60W makes high nicotine concentrations uncomfortably harsh.

Full Specifications

What's in the Pack?

• 5x Vaporesso GTX Replacement Coils (0.8Ω or 0.2Ω — option of choice)

Please check your device's compatibility with your chosen resistance before ordering — the 0.2Ω requires a minimum of 45W device output. Not compatible with the Vaporesso GT, NRG, or EUC coil platforms. Devices and e-liquid sold separately at QSS Vape.

DISPATCH & DELIVERIES

*If an item is returned to us by your local customs office we can provide a refund minus any postage costs incurred by ourselves. If an item is seized by your local customs office this will be the responsibility of the customer to resolve the issue.

We are currently offering free UK delivery (2nd class signed for) on all orders over £30.

Order cut-off for all delivery services is 3pm (UK time). Orders placed after 3pm will be treated, for the purposes of delivery, as having been placed the next working day We try our best to accommodate and be as flexible as possible, please email us if you have any specific requirements on: info@qss-vape.co.uk.

Working days are defined as Monday – Friday (excluding bank and public holidays) – therefore any orders placed after 3pm on Friday will not be processed until Monday.

The majority of deliveries require a signature to confirm receipt. If a signature cannot be obtained, the carrier may ask a neighbour to sign for the delivery. Deliveries that require a signature will not be left if a signature cannot be obtained.

If the carrier leaves the delivery with a neighbour or at your local post office, they will leave a card for you telling you where it is. You may, when placing your order online, specify a different delivery address than your payment address if this is more convenient for you.

All delivery timescales are approximate and subject to availability. The precise timing of a delivery cannot be specified.

Insurance – PLEASE READ

All our free flat rate and Signed For services are insured up to the value of £50. We recommend choosing the Special Delivery option for all orders over £50 as this covers goods up to £500 and is guaranteed next working day delivery.

If your order has not arrived within 5 working days (UK orders) and 14 working days (non-UK orders) please contact us quoting your order number in all correspondence.

If you require any clarification regarding 'Dispatch & Deliveries' please feel free to contact us on: info@qss-vape.co.uk